CONTACT POINTS

NW Mailing List nw-mailing-list at nwhs.org
Tue Jun 16 16:32:35 EDT 2015


Ed,

I did not see your question come thru on the modeling list.

For your question on the turntable,  I would recommend hardwiring track and not using the contact points.  This was one reason I gave up my Walthers turntable.  One solution might be to use Wahl's clipper oil or another conductive oil on the points.

As for tacking down track,  I have not used it but one alternative is to use a silicone adhesive.  The adhesive is used to keep the track in line until you add the ballast and once the ballast is glued your track should remain in place just like the prototype.  Now I didn't use this but instead did as you with my pin vise and drilled individual holes, yes it is no fun!  I would recommend Peco track nails as they are smaller than anything else I have seen.

Find them here:

http://www.walthers.com/exec/search?quick=552-sl8314&x=-905&y=-79

I used the SL8314, not sure about this replacement.  Mine were long enough to go thru HO track and cork and hold well, even on Precision Scale elevated curve track. Number 78 hole is all you need.

James Wall
Rural Hall, NC
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://pairlist6.pair.net/pipermail/nw-mailing-list/attachments/20150616/1bd5cad1/attachment.html>


More information about the NW-Mailing-List mailing list