State of 1218 (was Re: 611)

NW Mailing List nw-mailing-list at nwhs.org
Thu Jun 18 08:42:47 EDT 2015


Mike – I didn’t get to see those pistons, but I saw the rest of it . . .

EdK

From: NW Mailing List 
Sent: Wednesday, June 17, 2015 10:06 AM
To: 'NW Mailing List' 
Subject: RE: State of 1218 (was Re: 611)

There are pistons missing, plus there were parts stolen to use on the 611.

 

Regards,

Mike Voiland.

 

From: NW-Mailing-List [mailto:nw-mailing-list-bounces at nwhs.org] On Behalf Of NW Mailing List
Sent: Tuesday, June 16, 2015 22:33
To: NW Mailing List
Subject: Re: State of 1218 (was Re: 611)

 

Last time I saw 1218, there were no visible valve gear parts missing.

 

EdKing

 

From: NW Mailing List 

Sent: Tuesday, June 16, 2015 2:28 PM

To: NW Mailing List 

Subject: State of 1218 (was Re: 611)

 

On Mon, Jun 15, 2015 at 5:43 PM, Jerome wrote:

  Some thoughts about #1218 and # 2156.  During my last visit to VMT, I was told that # 1218 is missing some valve gear parts.
  They were not installed when the loco left Birmingham shops for display in Roanoke.  And they were 'lost' when the Birmingham
  shop was closed and sold.  So - is that the case; and would NS want to fund manufacture of the replacements, plus the long list
  needed to restore # 1218 to operation ?

 

Back when the NS Steam Program was terminated with extreme prejudice, the matter was thoroughly discussed on the RAILROAD listserv email list. Steve Lee, manager of the UP steam program, was a member of the list and commented about the auction held in 1997.

 

Lee also commented on the state of the 1218. His comments are posted here, with his permission, to provide a professional perspective on what happened to the A. The 1218 could be put back in service, but at great expense to _someone_ (or many, many generous donors).

 

Bruce in Blacksburg

 

===================================

 

I saw the engine in the shop during the auction and got a good look at it. The work that was in progress at the time was primarily firebox work that was needed at the time the engine was restored but wasn't completed at that time because of budget and time constraints. This consisted of new partial side sheets in the firebox, a new door sheet, most of a new mudring, and some new side sheet sections at the mudring. This was in addition to replacement of flues, tubes and superheaters and some appliance work that was normal maintenance, not left over from the restoration. When I saw the engine, the new sheets had been rolled and the staybolt holes punched, and were tackwelded in place in the firebox. The ashpans, grates and grate bearers were out, of course, as were the flues, tubes and superheaters. As I said, the sheets were only tackwelded in place. There was still a great deal of work to do in finish welding the sheets, riveting the mudring, and making and driving several hundred staybolts. None of this work was fully completed; the grates, grate bearers and ashpans were put back in for appearance by Scott Lindsey and his crew.

 

NS's entire stock of flues, tubes, and superheater material was sold; most of it went to scrappers because it was odd-sized and not of use on any locomotives now running or under restoration. Some of the appliances (injector, air pumps, lubricators, water pump, dynamo, etc) now on the engine are shells, put back on for appearance only. The appliances that had been rebuilt brought a much higher price at the auction than would empty shells, of course, and no one at the auction could stand the thought of fully-rebuilt appliances being put on a locomotive that probably won't run again for many years, if at all.

 

As noted, N&W used a lot of odd-sized stuff, including odd-sized staybolts and odd-sized flues and superheater units. Because these things weren't adaptable to any other locomotives out there now, the scrappers got it all. Of course, this stuff can be made new again from scratch.

 

IMHO, NS could have simply scrapped the 1218 and all the machines, parts, tools and supplies at the end of the program. Instead, they spent some money putting 1218 back together, and made the other stuff available to other users. Contrary to popular belief, they did not make much, if any, money on the auction sale when all things are considered, and much of that stuff is being used all over the country now to keep other engines going and even to help in some restorations. AFAIK, no one has ever given them any credit for that.

 

Steve Lee 


--------------------------------------------------------------------------------

________________________________________
NW-Mailing-List at nwhs.org
To change your subscription go to
http://list.nwhs.org/mailman/options/nw-mailing-list
Browse the NW-Mailing-List archives at
http://list.nwhs.org/pipermail/nw-mailing-list/

 


--------------------------------------------------------------------------------


     This email has been checked for viruses by Avast antivirus software. 
      www.avast.com 
     

 



--------------------------------------------------------------------------------
________________________________________
NW-Mailing-List at nwhs.org
To change your subscription go to
http://list.nwhs.org/mailman/options/nw-mailing-list
Browse the NW-Mailing-List archives at
http://list.nwhs.org/pipermail/nw-mailing-list/

---
This email has been checked for viruses by Avast antivirus software.
https://www.avast.com/antivirus
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://pairlist6.pair.net/pipermail/nw-mailing-list/attachments/20150618/ae2af978/attachment-0001.html>


More information about the NW-Mailing-List mailing list