[BULK]Re: DCC - turntables

[nw-modeling-list at nwhs.org]

I guess I need to hit a DCC-dedicated website to see how best to wire my turntable for DCC operation then eh? Thanks for the info!

Bob Welsh
Hillsville, VA
  ----- Original Message ----- 
  From: nw-modeling-list at nwhs.org 
  To: N and W Modeling List 
  Sent: Wednesday, January 18, 2006 6:48 AM
  Subject: Re: [BULK]Re: DCC - turntables


  Bob;

  It depends on how the turntable is wired if it is needed.  And, no matter what, it will not hurt to install a reversing module in series with the turntable.

  Nigel F Misso

    ----- Original Message ----- 
    From: nw-modeling-list at nwhs.org 
    To: N and W Modeling List 
    Sent: Tuesday, January 17, 2006 9:32 AM
    Subject: Re: [BULK]Re: DCC


    Well since we are on the subject of DCC here... I have a general DCC question:
    Is the reversing module appropriate for turntables as well as wyes?

    Bob Welsh



------------------------------------------------------------------------------


  ________________________________________
  NW-Modeling-List at nwhs.org
  To change your subscription go to
  http://list.nwhs.org/mailman/options/nw-modeling-list



------------------------------------------------------------------------------


  No virus found in this incoming message.
  Checked by AVG Free Edition.
  Version: 7.1.371 / Virus Database: 267.14.20/234 - Release Date: 1/18/2006
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://six.pairlist.net/pipermail/nw-modeling-list/attachments/20060119/739a74e6/attachment-0001.html