PCM Y6b's

[nw-modeling-list at nwhs.org]

Hi Lois;

I do not know which ones Bob used.

If you want DCC & Sound, listen to the PCM Y6b, it uses a LokSound decoder.  If you like the PCM, you can purchase the same decoder, and get the same sound files.

Nigel F Misso

  ----- Original Message ----- 
  From: nw-modeling-list at nwhs.org 
  To: nw-modeling-list at nwhs.org 
  Sent: Saturday, May 27, 2006 9:06 PM
  Subject: Re: PCM Y6b's


  Can I ask what decoders you used for your Rivarossi Y6bs? I would like to know, in case I would want to eventually convert my Rivarossi 2174 to DCC and sound. I am also looking for another Rivarossi Y6's, but I will post my email here so those who wish to answer my inquiries can contact me directly and not add unnecessary private business to the list.

  Lois J. Ponton

  ljp611 at ntelos.net



   


----------------------------------------------------------------------------

    From:  nw-modeling-list at nwhs.org
    Reply-To:  N and W Modeling List <nw-modeling-list at nwhs.org>
    To:  "N and W Modeling List" <nw-modeling-list at nwhs.org>
    Subject:  Re: PCM Y6b's
    Date:  Wed, 24 May 2006 20:27:42 -0400
    >At the risk of having things thrown at me, for the money, Rivarossi 
    >Y's picked up on ebay, even if you have to remotor them and install 
    >DCC decoders in them, to me are every bit as good with a couple 
    >hundred dollars total investment, as the PCM $600 unit. I have five 
    >of them, and while I had to seek assistance in getting the decoders 
    >in them, I found some help here and managed to install two myself. I 
    >took two units to the area hobby shop to do those, and I have one 
    >more to go. With some custom detailing and patience, you can make a 
    >fleet of unique Y's for a LOT less than the expense of that PCM 
    >unit.
    >
    >Bob Welsh
    >
    >----- Original Message ----- From: <nw-modeling-list at nwhs.org>
    >To: "N and W Modeling List" <nw-modeling-list at nwhs.org>
    >Sent: Wednesday, May 24, 2006 5:32 AM
    >Subject: Re: PCM Y6b's
    >
    >
    >>Did anybody get the packet in the mail from PCM/BLI??? Maybe THIS 
    >>is why the
    >>models cost so much.  So the guy in charge worked for Lionel and 
    >>Mikes Train
    >>House.
    >>
    >>On a related topic, I too have a Bowser Challenger and it pulls 
    >>great, and
    >>articulates correctly.  The overhang is pretty much proto-typical, 
    >>unlike
    >>the A, Y3, or Y6b. The only way for the plastic models to 'look 
    >>good' going
    >>around curves, is for the curves to be about 60 inches in diameter, 
    >>and
    >>super-elevated.  Hmmm.....  So even a correctly articulated engine 
    >>like a
    >>Big Boy would have little overhang issues.  Apples and oranges I 
    >>guess.
    >>
    >>Mark Lindsey
    >>
    >>>Bob contact Rick Bell in Augusta, Ga about installing decoders and
    >>>remotoring. He is at Rwbrv4 at aol.com,  Cal Reynolds
    >>>----- Original Message -----
    >>>From: <nw-modeling-list at nwhs.org>
    >>>To: "N and W Modeling List" <nw-modeling-list at nwhs.org>
    >>>Sent: Monday, May 22, 2006 7:16 AM
    >>>Subject: Re: PCM Y6b's
    >>>
    >>>
    >>>>WEll I have FIVE Rivarossi Y6b's. Three are still as Y6b's, and 
    >>>>two I have
    >>>>are kitbashed into a Y6 and a Y4. WIth a little bit of money 
    >>>>invested in
    >>>>detail parts and DCC decoders I have five unique units. Now, I 
    >>>>have had
    >>>>trouble getting the DCC decoders in them so am seeking help 
    >>>>there, but I
    >>>>figure even remotored and with the investment I have in them, I 
    >>>>have half
    >>>>the investment that one of the PCM units would be, or less.
    >>>>
    >>>>Bob Welsh
    >>>>
    >>>>----- Original Message -----
    >>>>From: <nw-modeling-list at nwhs.org>
    >>>>To: "'N and W Modeling List'" <nw-modeling-list at nwhs.org>
    >>>>Sent: Sunday, May 21, 2006 10:08 PM
    >>>>Subject: RE: PCM Y6b's
    >>>>
    >>>>
    >>>>>Isn't PCM connected in some way to BLI? IF so what happened to 
    >>>>>the
    >>>>>communication between the two companies. Since I heard on the 
    >>>>>list a Y6b
    >>>>>was
    >>>>>going to be made I was really excited. Now hearing Mr. King's 
    >>>>>comments on
    >>>>>the Y6b, which I personally pay very close attention to all 
    >>>>>comments Mr.
    >>>>>King makes as well as a lot of others here on the list, I will 
    >>>>>resume a
    >>>>>search for a brass model and not purchase the PCM model at all. 
    >>>>>The model
    >>>>>railroad industry is BOOMING right now and for PCM to put out a
    >>>>>substandard
    >>>>>model for the price they are asking is ridiculous. I have a 
    >>>>>tight model
    >>>>>railroad budget and I would have been severely upset if I had 
    >>>>>purchased
    >>>>>this
    >>>>>model and my current Rivarossi Y6b be more representative of the 
    >>>>>awesome
    >>>>>class of locomotive then the PCM.
    >>>>>
    >>>>>
    >>>>>Just me 2 cents worth.
    >>>>>Jon Kelley
    >>>>>norfolknwestern1218 at adelphia.net
    >>>>>
    >>>>>-----Original Message-----
    >>>>>From: nw-modeling-list-bounces at nwhs.org
    >>>>>[mailto:nw-modeling-list-bounces at nwhs.org] On Behalf Of
    >>>>>nw-modeling-list at nwhs.org
    >>>>>Sent: Sunday, May 21, 2006 11:57 AM
    >>>>>To: N and W Modeling List
    >>>>>Subject: Re: PCM Y6b's
    >>>>>
    >>>>>Nigel - attached is the letter to PCM that will go in tomorrow's 
    >>>>>mail.
    >>>>>
    >>>>>Ed King
    >>>>>----- Original Message -----
    >>>>>From: <nw-modeling-list at nwhs.org>
    >>>>>To: "N and W Modeling List" <nw-modeling-list at nwhs.org>
    >>>>>Sent: Saturday, May 20, 2006 10:02 PM
    >>>>>Subject: Re: PCM Y6b's
    >>>>>
    >>>>>
    >>>>>>Hi Ed;
    >>>>>>
    >>>>>>Have you sent these comments to PCM?
    >>>>>>
    >>>>>>Thank you
    >>>>>>Nigel F Misso
    >>>>>>
    >>>>>>----- Original Message -----
    >>>>>>From: <nw-modeling-list at nwhs.org>
    >>>>>>To: "N and W Modeling List" <nw-modeling-list at nwhs.org>
    >>>>>>Sent: Friday, May 19, 2006 5:25 PM
    >>>>>>Subject: Re: PCM Y6b's
    >>>>>>
    >>>>>>
    >>>>>>>So I got mine yesterday, and put it on the programming track 
    >>>>>>>today.
    >>>>>>>
    >>>>>>>Comments:  Valve gear is not acceptable.  If Proto can put 
    >>>>>>>acceptable
    >>>>>>>valve gear on the Y-3s, why can't these folks put it on the 
    >>>>>>>Y-6b? And
    >>>>>>>Broadway on the N&W A, for that matter?
    >>>>>>>                     Sound is barely acceptable; the exhaust 
    >>>>>>>sound is
    >>>>>>>confusing to say the least.  Other sounds are OK; a nice touch 
    >>>>>>>is the
    >>>>>>>splash of water from the injector overflow after the injector 
    >>>>>>>shuts
    >>>>>>>off.
    >>>>>>>                     Programming is OK.
    >>>>>>>                     Power - not acceptable.  My Broadway 1218 
    >>>>>>>will
    >>>>>>>shove
    >>>>>>>the Y-6b right off the test track without slipping a driver (I 
    >>>>>>>haven't
    >>>>>>>tested it against my Y-3s).  The Y-6b will not budge the A if 
    >>>>>>>the A is
    >>>>>>>not under power.
    >>>>>>>                     Tender is heavy all right, but I guess 
    >>>>>>>that's
    >>>>>>>because
    >>>>>
    >>>>>>>of the big speaker.
    >>>>>>>
    >>>>>>>Ed King
    >>>>>>>
    >>>>>>>----- Original Message -----
    >>>>>>>From: <nw-modeling-list at nwhs.org>
    >>>>>>>To: "N and W Modeling List" <nw-modeling-list at nwhs.org>
    >>>>>>>Sent: Thursday, May 18, 2006 9:22 AM
    >>>>>>>Subject: Re: PCM Y6b's
    >>>>>>>
    >>>>>>>
    >>>>>>>>There, there, David.  Everything's gonna be OK.  Let not your 
    >>>>>>>>heart be
    >>>>>>>>troubled . . .
    >>>>>>>>
    >>>>>>>>EdKing
    >>>>>>>>----- Original Message -----
    >>>>>>>>From: <nw-modeling-list at nwhs.org>
    >>>>>>>>To: "N and W Modeling List" <nw-modeling-list at nwhs.org>
    >>>>>>>>Sent: Thursday, May 18, 2006 7:41 AM
    >>>>>>>>Subject: Re: PCM Y6b's
    >>>>>>>>
    >>>>>>>>
    >>>>>>>>>It's probably my imagination, but....
    >>>>>>>>>
    >>>>>>>>>Is there something proportionately off about the front
    >>>>>>>>>end of PCM's Y6b?  All the individual parts are great,
    >>>>>>>>>but the front view on the website doesn't look right.
    >>>>>>>>>Is the headlight a bit too high?  The Y6b bracket was
    >>>>>>>>>different from the other Y6's and the headlight was
    >>>>>>>>>located lower relative to the number plate.  Gave the
    >>>>>>>>>Y6b a less squatty appearance from  the front.
    >>>>>>>>>
    >>>>>>>>>Maybe I'm just having a rivet-counter relapse.  Try to
    >>>>>>>>>keep it under control but don't always succeed.
    >>>>>>>>>
    >>>>>>>>>Dave Stephenson
    >>>>>>>>>
    >>>>>>>>>
    >>>>>>>>>
    >>>>>>>>>__________________________________________________
    >>>>>>>>>Do You Yahoo!?
    >>>>>>>>>Tired of spam?  Yahoo! Mail has the best spam protection 
    >>>>>>>>>around
    >>>>>>>>>http://mail.yahoo.com
    >>>>>>>>>________________________________________
    >>>>>>>>>NW-Modeling-List at nwhs.org
    >>>>>>>>>To change your subscription go to
    >>>>>>>>>http://list.nwhs.org/mailman/options/nw-modeling-list
    >>>>>>>>>
    >>>>>>>>
    >>>>>>>>
    >>>>>>>>________________________________________
    >>>>>>>>NW-Modeling-List at nwhs.org
    >>>>>>>>To change your subscription go to
    >>>>>>>>http://list.nwhs.org/mailman/options/nw-modeling-list
    >>>>>>>>
    >>>>>>>
    >>>>>>>
    >>>>>>>________________________________________
    >>>>>>>NW-Modeling-List at nwhs.org
    >>>>>>>To change your subscription go to
    >>>>>>>http://list.nwhs.org/mailman/options/nw-modeling-list
    >>>>>>
    >>>>>>________________________________________
    >>>>>>NW-Modeling-List at nwhs.org
    >>>>>>To change your subscription go to
    >>>>>>http://list.nwhs.org/mailman/options/nw-modeling-list
    >>>>>>
    >>>>>
    >>>>>________________________________________
    >>>>>NW-Modeling-List at nwhs.org
    >>>>>To change your subscription go to
    >>>>>http://list.nwhs.org/mailman/options/nw-modeling-list
    >>>>>
    >>>>>
    >>>>>--
    >>>>>No virus found in this incoming message.
    >>>>>Checked by AVG Free Edition.
    >>>>>Version: 7.1.392 / Virus Database: 268.6.1/344 - Release Date: 
    >>>>>5/19/2006
    >>>>>
    >>>>
    >>>>________________________________________
    >>>>NW-Modeling-List at nwhs.org
    >>>>To change your subscription go to
    >>>>http://list.nwhs.org/mailman/options/nw-modeling-list
    >>>>
    >>>>
    >>>>
    >>>>--
    >>>>No virus found in this incoming message.
    >>>>Checked by AVG Free Edition.
    >>>>Version: 7.1.392 / Virus Database: 268.7.0/345 - Release Date: 
    >>>>5/22/2006
    >>>>
    >>>>
    >>>
    >>>
    >>
    >>Mark Lindsey
    >>
    >>
    >>
    >>
    >>________________________________________
    >>NW-Modeling-List at nwhs.org
    >>To change your subscription go to
    >>http://list.nwhs.org/mailman/options/nw-modeling-list
    >>
    >>
    >>--
    >>No virus found in this incoming message.
    >>Checked by AVG Free Edition.
    >>Version: 7.1.394 / Virus Database: 268.7.0/346 - Release Date: 
    >>5/23/2006
    >>
    >>
    >
    >________________________________________
    >NW-Modeling-List at nwhs.org
    >To change your subscription go to
    >http://list.nwhs.org/mailman/options/nw-modeling-list



------------------------------------------------------------------------------


  ________________________________________
  NW-Modeling-List at nwhs.org
  To change your subscription go to
  http://list.nwhs.org/mailman/options/nw-modeling-list
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://six.pairlist.net/pipermail/nw-modeling-list/attachments/20060528/c4aa12c6/attachment-0001.html