Y6b stenciling

[nw-modeling-list at nwhs.org]

If it was bare boiler steel there, and I suspect it was, I imagine it would have been given the old graphite-and-oil treatment. Rare was the black paint that could stand up to the heat. If it was a black smokebox, normally the smokebox was lagged with insulation.
Andre Jackson and/or Lisa Burrows
Life is short; update your anti-virus software
  ----- Original Message ----- 
  From: nw-modeling-list at nwhs.org 
  To: N and W Modeling List 
  Sent: Tuesday, June 06, 2006 12:09 PM
  Subject: Re: Y6b stenciling


  Does any know if the Y6b should have the grey on top of the smoke box.
  The only y6b that should have a complete gray smokebox was the nonlagged 2188.
  All the rest were painted black except the front end [door and facing[.

  Stephen Rineair
    ----- Original Message ----- 
    From: nw-modeling-list at nwhs.org 
    To: nw-modeling-list at nwhs.org 
    Sent: Tuesday, June 06, 2006 10:44 AM
    Subject: Y6b stenciling





    ________________________________________
    NW-Modeling-List at nwhs.org
    To change your subscription go to
    http://list.nwhs.org/mailman/options/nw-modeling-list



------------------------------------------------------------------------------


  ________________________________________
  NW-Modeling-List at nwhs.org
  To change your subscription go to
  http://list.nwhs.org/mailman/options/nw-modeling-list
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://six.pairlist.net/pipermail/nw-modeling-list/attachments/20060608/ee4c19cf/attachment.htm