56" drivers was Re: model locomotive dimensions index?

[NW Modeling List]

Kenneth
 I agree with Nigel for spare parts. I did the exact same thing for My BLI
'A' and 'J' class locomotives, purchased additional for parts. Since I run
present day Norfolk Southern with Steam excursions The spare locomotives sit
in my roundhouse like they are undergoing restoration.


Jon Kelley
norfolknwestern1218 at comcast.net

-----Original Message-----
From: nw-modeling-list-bounces at nwhs.org
[mailto:nw-modeling-list-bounces at nwhs.org] On Behalf Of NW Modeling List
Sent: Monday, January 05, 2009 1:25 PM
To: NW Modeling List
Subject: Re: 56" drivers was Re: model locomotive dimensions index?

Hi Kenneth;

Bachmann - like all who manufacture in China can not get spare parts shipped

out without a license; the occasionally can get parts from warranty returns.

I figured with current pricing, just get a couple of 2-6-6-2 models for 
parts.  Since the sound DCC version came out, the price on the non-DCC have 
dropped so far that I feel they're worth it for the parts.

Measurements - have done any yet, I do have one or more books with 
drawings - still packed up.  Note that on the M classes the driver spacing 
is uneven, the M and M1 are the same, the M2 is different.

Nigel F Misso, PE
http://www.linkedin.com/in/nigelmisso
----- Original Message ----- 
From: "NW Modeling List" <nw-modeling-list at nwhs.org>
To: "NW Modeling List" <nw-modeling-list at nwhs.org>
Sent: Sunday, January 04, 2009 8:46 PM
Subject: Re: 56" drivers was Re: model locomotive dimensions index?


NW Modeling List wrote:

> Hi Kenneth;

>

> The small drivered Bachmann Spectrum 4-6-0, advertised as 52" drivers, 

> actually has 56" drivers (I measured 55½").  These are the same drivers as



> on the Spectrum 2-6-6-2.


It's funny you should mention that.  I was just looking at the same
model in my display case yesterday, and wondering how hard it would be
to turn it into a 4-8-0.  Have you attempted to get just the drivers
from Bachmann?


> As far as making an M, my current plan, which has been delayed numerous 

> times to job and move, is to add an axle to the 56" drivered Spectrum 

> 4-6-0. The three axle positioning looks about right, and the cylinder 

> positioning with the four wheel lead truck sort of works out too.


I have no plans or drawings on an M, but I spent this morning attempting
to scale dimensions from a broadside photo of one, based strictly on the
56" driver diameter.  I came up with 64" driver spacing, 16' total
driver wheelbase, 24'2" from the rear axle to the center of the lead
truck, 138" from the main driver centerline to the back of the
cylinders, 7' wheelbase on the truck, and 28" diameter truck wheels.
Does that sound about right?

I just measured my Bachmann 4-6-0.  The axle spacing is 74", the lead
truck wheelbase is 76", and the distance from the main driver to the
back of the cylinders is 146".  Again, does that compare favorably with
your measurements?  Can any parts, other than the drivers themselves, be
used to model an M?
-- 
Kenneth Rickman - krickman1 at carolina.rr.com
Salisbury, NC

If at first you don't succeed, use a bigger hammer!
________________________________________
NW-Modeling-List at nwhs.org
To change your subscription go to
http://list.nwhs.org/mailman/options/nw-modeling-list
Browse the NW-Modeling-List archives at
http://list.nwhs.org/pipermail/nw-modeling-list/


________________________________________
NW-Modeling-List at nwhs.org
To change your subscription go to
http://list.nwhs.org/mailman/options/nw-modeling-list
Browse the NW-Modeling-List archives at
http://list.nwhs.org/pipermail/nw-modeling-list/
No virus found in this incoming message.
Checked by AVG - http://www.avg.com 
Version: 8.0.176 / Virus Database: 270.10.2/1876 - Release Date: 1/5/2009
9:44 AM