restoring position light signal

[NW Modeling List]

Stephen,
 
Your best bet with the bulbs is to replace all of them with standard 1156  
automotive bulbs. The original bulbs are 9 volt I believe and are hard to 
find  and expensive. I used to get my 12v transformers at Radio Shack but 
haven't  found them there lately. My last power supply was from a computer 
laptop charger  rated at 12 volts. They can be had cheap on Ebay.
 
Thanks,
 
Richard D. Shell
Troutville, VA
 
 
In a message dated 10/29/2010 10:33:15 A.M. Eastern Daylight Time,  
nw-modeling-list at nwhs.org writes:

 
I am restoring  a N&W position light signal and would like to know what 
would be a good  power source? 
Does anyone  know the voltage of the light bulbs as I need to replace a 
couple of  them. 
Any help would  be most appreciated! 
Stephen  Rineair 



________________________________________
NW-Modeling-List at nwhs.org
To  change your subscription go  to
http://list.nwhs.org/mailman/options/nw-modeling-list
Browse the  NW-Modeling-List archives  at
http://list.nwhs.org/pipermail/nw-modeling-list/

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://six.pairlist.net/pipermail/nw-modeling-list/attachments/20101029/d7c2dec3/attachment.htm>