Brass painting advice wanted

[NW Modeling List]

Doug,
Photos of your spray booth would be great. I was thinking of cobbling one  
together out of some scrap luan plywood I have, and using a bathroom or  
kitchen exhaust fan to vent the fumes out the garage door. 
 
Greg Harrod
=================================
 
In a message dated 3/10/2011 6:53:24 A.M. Eastern Standard Time,  
nw-modeling-list at nwhs.org writes:

Good ventilation is a must, as is a  respirator and gloves. Nitrile gloves 
for solvent base paints. And while we're  spending your money another tool 
that comes in very handy is a spray booth.  The commercially available ones 
are pretty pricey, but you can build your own  fairly inexpensively. I've 
built a few for less then $100 with a good quality  fan. I could email some 
photos of mine if you would like to see how it was  built. 
Good luck
Doug Langlitz




-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://six.pairlist.net/pipermail/nw-modeling-list/attachments/20110312/d6f61db7/attachment.html>