don't use latex gloves - do use nitrile gloves Re: Brass painting advice wanted

[NW Modeling List]

Having never heard of nitrile gloves, I did a google search and found that they are indeed an alternative to latex, especially for those who may be allergic to latex (I'm not, so it never occurred to me to seek an alternative).  The material seemed to indicate that they are a bit bulkier than latex but as I have no dog in this fight, it might be prudent to seek the experiences of the group.
 
Anybody have experience with both?  Preference?

Ed Svitil
Norfolk & Western Railway
 
  



 


Date: Thu, 17 Mar 2011 21:00:03 +0000
To: nw-modeling-list at nwhs.org
Subject: don't use latex gloves - do use nitrile gloves Re: Brass painting advice wanted
From: nw-modeling-list at nwhs.org





Please do not use latex gloves; use nitrile gloves.


latex dissolves in solvents (including alcohol) like those used in paint (even the chemicals is water based paint).
latex residue can transfer to your model; ruining the paint job.
many people are deathly allergic to latex
paint chemicals can get through the latex, and then through your skin.Nitrile gloves are widely available; Harbor Freight stocks them.

when using nitrile gloves, if you are extremely concerned about contamination, after putting on the gloves, wash your hands with alcohol.  Alcohol will have no adverse effect on the nitrile.

the hard disk drive industry - which is hyper sensitive to contamination; far more so than NASA or semi conductor; uses Nitrile gloves.

Nigel
----- Original Message -----
From: "NW Modeling List" <nw-modeling-list at nwhs.org>
To: "NW Modeling" <nw-modeling-list at nwhs.org>
Sent: Thursday, March 17, 2011 9:34:45 PM
Subject: RE: Brass painting advice wanted



And further to this this thread, once I priced the spray booths in MicroMark I also built my own.  5 pieces of scrap plywood as big as you want (maybe 12" deep by 12" high by 18" wide, mount a bathroom fan behind an furnace air filer, wire a switch to the fan and you're good to go.  I also put an old lazy susan inside to rotate the parts as I paint 'em with an old gooseneck lamp to light it up.
 
Don't forget the respirator, industrial standard air mask.  Latex gloves are also handy.

Ed Svitil
Norfolk & Western Railway
 
  



 


Date: Tue, 15 Mar 2011 13:23:06 -0400
To: nw-modeling-list at nwhs.org
Subject: Re: Brass painting advice wanted
From: nw-modeling-list at nwhs.org


Greg, if you want to give me your email address I can send you as many pics as you need.

Doug Langlitz





-----Original Message-----
From: NW Modeling List <nw-modeling-list at nwhs.org>
To: nw-modeling-list <nw-modeling-list at nwhs.org>
Sent: Sat, Mar 12, 2011 7:33 pm
Subject: Re: Brass painting advice wanted




Doug,
Photos of your spray booth would be great. I was thinking of cobbling one together out of some scrap luan plywood I have, and using a bathroom or kitchen exhaust fan to vent the fumes out the garage door. 
 
Greg Harrod
=================================
 
In a message dated 3/10/2011 6:53:24 A.M. Eastern Standard Time, nw-modeling-list at nwhs.org writes:
Good ventilation is a must, as is a respirator and gloves. Nitrile gloves for solvent base paints. And while we're spending your money another tool that comes in very handy is a spray booth. The commercially available ones are pretty pricey, but you can build your own fairly inexpensively. I've built a few for less then $100 with a good quality fan. I could email some photos of mine if you would like to see how it was built. 

Good luck
Doug Langlitz
________________________________________ NW-Modeling-List at nwhs.org To change your subscription go to http://list.nwhs.org/mailman/options/nw-modeling-list Browse the NW-Modeling-List archives at http://list.nwhs.org/pipermail/nw-modeling-list/ 
________________________________________
NW-Modeling-List at nwhs.org
To change your subscription go to
http://list.nwhs.org/mailman/options/nw-modeling-list
Browse the NW-Modeling-List archives at
http://list.nwhs.org/pipermail/nw-modeling-list/
________________________________________ NW-Modeling-List at nwhs.org To change your subscription go to http://list.nwhs.org/mailman/options/nw-modeling-list Browse the NW-Modeling-List archives at http://list.nwhs.org/pipermail/nw-modeling-list/ 		 	   		  
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://six.pairlist.net/pipermail/nw-modeling-list/attachments/20110318/3250e5dc/attachment.htm>