sound decoder ?

[NW Modeling List]

So gentlemen, which decoder? Light steam or medium steam?

The sound of the speaker is no problem!

Stephen

 

From: NW-Modeling-List [mailto:nw-modeling-list-bounces at nwhs.org] On Behalf Of NW Modeling List via NW-Modeling-List
Sent: Tuesday, October 27, 2015 7:08 PM
To: nw-modeling-list at nwhs.org
Cc: NW Modeling List
Subject: Re: sound decoder ?

 

Mark,

You are absolutely right! Oops! I guess old age is sneaking up on me! And the port design opens up a whole different set of variables! LOL But these little speakers just do not move enough air for that! I have found that the "Air Suspension" Install work wonders for HO sound decoders. Anything that ups the low end and stops the wrattles goes a long way!

Thanks for correcting me! 

Ray Russell Sr.

 

In a message dated 10/27/2015 3:07:35 P.M. Eastern Daylight Time, nw-modeling-list at nwhs.org writes:

Actually a sealed box is called Air Suspension, Bass reflex implies a ported design.

-- 

Mark Lindsey

Stuck in the 1930’s

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://pairlist6.pair.net/pipermail/nw-modeling-list/attachments/20151027/c3baff96/attachment.html>