55T Hopper Question

[NW Modeling List]

Roger, thanks for the confirmation on the Bowser/Stewart question
Carl, thanks for the comparison observation.  And yes. the link you supplied is the hopper I was referring to.
Now off to find decal sources so I can re-decal cars from either maker to N&W. Matt Goodman
Columbus, Ohio
 

    On Sunday, July 24, 2016 5:03 PM, NW Modeling List via NW-Modeling-List <nw-modeling-list at nwhs.org> wrote:
 
 

 Matt,
The Bowser fishbelly car IS or WAS the Stewart car.
The smaller 17" lettering was earlier than the 24" size. I don't know the date of changeover.
Roger Huber


      From: NW Modeling List via NW-Modeling-List <nw-modeling-list at nwhs.org>
 To: nw modeling List <nw-modeling-list at nwhs.org> 
Cc: NW Modeling List <nw-modeling-list at nwhs.org>
 Sent: Sunday, July 24, 2016 12:05 PM
 Subject: 55T Hopper Question
  
All, 
Recently I’ve become aware of the Bowser “Fishbelly” hopper painted for the N&W.  I have a couple of questions about it:
   
   - Is this the same kit that Stewart used to produce?  Photos I’ve seen on eBay suggest they are
   - I assume that the N&W never had this particular car (it’s lettered as a class HL) is this correct?
   - Would this model be appropriate for 1938-1940 time frame?

On the Accurail USRA front:
   
   - Accurail has two N&W paint schemes; one with a smaller “N&W” and horizontal lines above and below the car number, and a second with a larger N&W and no lines over/under the car number.  My understanding is that the smaller lettering is earlier.  When did this change take place?
   - Are there accurate decals for my era would be a good fit on both the Bowser / Accurail models?

My modeling “style” leans toward prototype modeling, but I’ve long since decided that I’m content with USRA and other generic models that were around (somewhere) during my modeling era.  I like the idea of having non-homogenous trains of cars as every photo I’ve seen from the thirties show quite the smorgasbord of cars in N&W trains.  I think mixing Bowser and Accurail would help give this mix of looks; with reasonably accurate lettering, I’m content that the look would be reasonably convincing.
Any other input on other workable hoppers is welcome (I do have two resin kits, as of yet unbuilt).
Matt
________________________________________
NW-Modeling-List at nwhs.org
To change your subscription go to
http://list.nwhs.org/mailman/options/nw-modeling-list
Browse the NW-Modeling-List archives at
http://list.nwhs.org/pipermail/nw-modeling-list/

   
________________________________________
NW-Modeling-List at nwhs.org
To change your subscription go to
http://list.nwhs.org/mailman/options/nw-modeling-list
Browse the NW-Modeling-List archives at
http://list.nwhs.org/pipermail/nw-modeling-list/

 
  
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://pairlist6.pair.net/pipermail/nw-modeling-list/attachments/20160725/b1a6e017/attachment.html>