Alco Models "Jawn Henry" on eBay

[NW Modeling List]

Thanks Kurt!

-Eric Bott

-----Original Message-----
From: NW-Modeling-List [mailto:nw-modeling-list-bounces at nwhs.org] On Behalf Of NW Modeling List via NW-Modeling-List
Sent: Saturday, September 03, 2016 20:03
To: NW Modeling List
Cc: NW Modeling List
Subject: RE: Alco Models "Jawn Henry" on eBay

I used NWSL universal couplings on mine and they work very well, kept two motor drive.  I have not converted to DCC yet.

Kurt S. Kramke

--------------------------------------------
On Fri, 9/2/16, NW Modeling List <nw-modeling-list at nwhs.org> wrote:

 Subject: RE: Alco Models "Jawn Henry" on eBay
 To: "NW Modeling List" <nw-modeling-list at nwhs.org>
 Date: Friday, September 2, 2016, 9:40 AM
 
 Lynn:
 
 I am very interested in what universal joint  parts worked in this application-- especially between the  truck pairs on each bolster.  Did you keep a parts list of  the stuff that finally worked?
 
 Thank you!
 
 -Eric Bott
 
 -----Original Message-----
 From: NW-Modeling-List [mailto:nw-modeling-list-bounces at nwhs.org]
 On Behalf Of NW Modeling List
 Sent: Friday,
 September 02, 2016 6:01
 To: nw-modeling-list at nwhs.org
 Subject: Re: Alco Models "Jawn Henry"
 on eBay
 
 I already have a
 Jawn Henry thru ebay, I tried a few times to win one and  came up short on the last second bidding, then one showed up  at a high bid price, nooobody bidded but me.
 
 as is you need fairly wide
 radius curves for this engine but I was encouraged by an ole  MR article someone hand built one with some Globe Drives and  ran on 22 inch radius, so I gave mine a major workover, took  about 4 months of trying this and thats and failures, ended  up single motoring, reworking the power drives, changing the  flex coupling between the trucks to a modded universal joint  (this was critical as the flex was causing derailments and  the old plastic didnt hold) it runs very well now on 24 inch  radius with DCC and bright heqadlights
 (4
 amp digitrax decoder) still figgering out sound for it.
 Critical was isolating the frame from trucks,  modding kaddee coupler boxes worked as mounting separation.
 Body was live and tender parts touched the engine  shorting.
 
 I may little
 tweaks yet to do on the drive train but its really good now.
 A little heads up if your interested in this engine.
 
 -Lynn-
 
 On 9/1/2016 1:37 AM, nw-modeling-list-request at nwhs.org
 wrote:
 > Date: Wed, 31 Aug 2016 13:06:20
 -0400
 > From: NW Modeling List <nw-modeling-list at nwhs.org>  > To: NW Modeling List <nw-modeling-list at nwhs.org>  > Subject: Alco Models "Jawn  Henry" on eBay  > Message-ID: <mailman.1945.1472664905.16141.nw-modeling-list at nwhs.org>
 > Content-Type: text/plain;
 charset="us-ascii"
 >
 > I noticed an Alco Models "Jawn
 Henry" on eBay, closing in a couple of days.
 >
 > Here is the link to
 the auction:
 > http://www.ebay.com/itm/351821212724?_trksid=p2060353.m1438.l2649&ssPa
 > geName=STRK%3AMEBIDX%3AIT
 >
 > Dave A
 
 ---
 This email
 has been checked for viruses by Avast antivirus software.
 https://www.avast.com/antivirus
 
 ________________________________________
 NW-Modeling-List at nwhs.org
 To change your subscription go to
 http://list.nwhs.org/mailman/options/nw-modeling-list
 Browse the NW-Modeling-List archives at  http://list.nwhs.org/pipermail/nw-modeling-list/
 ________________________________________
 NW-Modeling-List at nwhs.org
 To change your subscription go to
 http://list.nwhs.org/mailman/options/nw-modeling-list
 Browse the NW-Modeling-List archives at  http://list.nwhs.org/pipermail/nw-modeling-list/
 
________________________________________
NW-Modeling-List at nwhs.org
To change your subscription go to
http://list.nwhs.org/mailman/options/nw-modeling-list
Browse the NW-Modeling-List archives at
http://list.nwhs.org/pipermail/nw-modeling-list/