RS3 and T6 cooling fan

[NW Modeling List]

Mike,

There are two part numbers from Detail Associates to look for, these are 2702 and 2703.  One is listed as ALCO 64" and the other  ALCO 57”.  I do not know which fan the the RS3 or T6 uses.  I think the RS3 is the 57 and later RS11’s had a 64”.   On the T6 as the hood resembles the RS11 it may use the same as the RS11.  The 64” might also be for the FA/PA’s.  I have used these parts on an RS3 and a PA. model.  Precision Scale also make a screen and fan part(number not known) but their screen does not look right, it is woven.

Look here for Precision Scale:

https://www.precisionscaleco.com/wp-content/uploads/2017/03/HO-Diesel-WOP.pdf <https://www.precisionscaleco.com/wp-content/uploads/2017/03/HO-Diesel-WOP.pdf>


As a side line, it might be worth waiting to see if Bowser offers these parts once their RS3 is complete.  If you can determine which one you need and can not find it let me know as I have some in my personal stock.

Hope this helps,
James Wall
Rural Hall, NC

> On Nov 22, 2017, at 3:24 PM, NW Modeling List via NW-Modeling-List <nw-modeling-list at nwhs.org> wrote:
> 
> I am asking about the diameter of the round cooling fan on the long hood of the RS3 and the T6.  Are they the same diameter, etc?
> Is there an HO scale detail part anyone knows about?  I haven't been able to find one in searches.
> Thanks,
> Mike Shockley
> ________________________________________
> NW-Modeling-List at nwhs.org
> To change your subscription go to
> http://list.nwhs.org/mailman/options/nw-modeling-list
> Browse the NW-Modeling-List archives at
> http://list.nwhs.org/pipermail/nw-modeling-list/

James Wall
Rural Hall, NC



-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://pairlist6.pair.net/pipermail/nw-modeling-list/attachments/20171123/69d65d47/attachment.html>