Steam Switcher of the 1950s

[NW Modeling List]

Biggest problem is the running boards are too low for an S1 or S1a. Than's the hardest detail to change.
Jim Nichols 

    On Tuesday, November 27, 2018 10:16 PM, NW Modeling List <nw-modeling-list at nwhs.org> wrote:
 

 Roger

It would a really great article to see the conversion and what details it takes for the conversion.

wink, wink

Stoney
Rick c Stone
NWHS #0001

Date: Tue, 27 Nov 2018 23:47:20 +0000 (UTC)
From: NW Modeling List<nw-modeling-list at nwhs.org>
To: NW Modeling List<nw-modeling-list at nwhs.org>
Subject: Re: Steam Switcher of the 1950s
Message-ID:<mailman.5116.1543365718.9817.nw-modeling-list at nwhs.org>
Content-Type: text/plain; charset="utf-8"

Jack,
The S-1 model by PFM-Tenshodo shows up frequently on feebay and brass sites. Price varies quite a bit and can run from $185-395. The very correct S-1a by PFM many years later also shows up frequently at the same places. The S-1a tends to be very expensive ($495-895) but is a great model and runs well. The older S-1 is a typical Japanese import of the era and is bullet proof and smooth running.
The Life Like P2K USRA 0-8-0 is a really fine locomotive. They are regulars on feebay in new condition from about $139-240. While it's a great model it needs many details changed or added to make it an S-1 or S-1a. That all depends on how particular you are. Unless you're a true rivet counter this is a good way to go.
Good hunting!?Roger HuberDeer Creek Locomotive Works

________________________________________
NW-Modeling-List at nwhs.org
To change your subscription go to
http://list.nwhs.org/mailman/options/nw-modeling-list
Browse the NW-Modeling-List archives at
http://list.nwhs.org/pipermail/nw-modeling-list/


   
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://pairlist6.pair.net/pipermail/nw-modeling-list/attachments/20181128/49dcaa99/attachment.html>