SD40-2 High Hood

[NW Modeling List]

 Phil and all,
  Yes, there is an undecorated N&W version and it will have the tri-clasp side frames. The ST item numbers are SXT 31812 and SXT 31813.  Here is a link to the artwork:
https://www.scaletrains.com/wp-content/uploads/2020/01/SXT31812-Undec-NW-wm-sideview.jpg
  I have also heard that the solvaset and paper towel method of removing numbers works well on the Scale Trains models. I will likely do such on one of my units and apply the Claytor scheme.  Thanks for the heads up on the number boards.
Todd Arnett

    On Thursday, January 9, 2020, 10:40:10 PM EST, NW Modeling List via NW-Modeling-List <nw-modeling-list at nwhs.org> wrote:  
 
 
Nice. 



Would the undec have the right truck frames for N&W? If not, I found on their C39-8 locos, it wasn’t too difficult to remove cab numbers on their models using paper towel soaked in Walthers Solvaset, then use decals to renumber them. Just cut the paper towel big enough to cover the graphic you’re removing. It takes about 15-20 minutes of good soaking to then carefully rub off the old number without damaging the paint. Not sure about removing the “NW” to replace it with other graphics. That’s a lot more to remove. That’s when I break out the airbrush to paint out the old logo. 

  

Scaletrains number boards pop out fairly easily by prying it off with an Xacto knife (held on with rubber cement?). The BACK of the number boards have the graphics on them. After cleaning off the back of the number boards with Solvaset, I used Shellscale decals on the front of them to get new number boards that light up nicely. 

  

Phil Miller

  

From: NW-Modeling-List [mailto:nw-modeling-list-bounces at nwhs.org] On Behalf Of NW Modeling List
Sent: Thursday, January 09, 2020 7:13 PM
To: 'NW Modeling List'
Subject: RE: SD40-2 High Hood

  

 The society is currently discussing a pre-order method through the society or purchasing this model as inventory for the Commissary.  It all depends on the Scale Trains ordering deadline which will likely be in February.  Shane Wilson of Scale Trains will advise me of the deadline later this evening.  

  

  Also, the high hood version is available as undecorated for those that wish to apply the NS schemes or N&W Claytor scheme (F8). https://www.scaletrains.com/product/rivet-counter-ho-scale-emd-sd40-2-undecorated-r6/

  

  I will advise ASAP!

  

Regards,

  

Todd Arnett

President, NWHS

  

From: NW-Modeling-List [mailto:nw-modeling-list-bounces at nwhs.org] On Behalf Of NW Modeling List
Sent: Thursday, January 9, 2020 6:11 PM
To: nw-modeling-list at nwhs.org
Subject: SD40-2 High Hood

  

Just got this from Scale Trains.  I am not an HO modeler, but thought I would pass this on. 

  

https://www.scaletrains.com/product/rivet-counter-ho-scale-emd-sd40-2-norfolk-western-high-hood-r6/


Sent from my digital telegraph key

Jim Stapleton

Northernmost VA
________________________________________
NW-Modeling-List at nwhs.org
To change your subscription go to
http://list.nwhs.org/mailman/options/nw-modeling-list
Browse the NW-Modeling-List archives at
http://list.nwhs.org/pipermail/nw-modeling-list/
  
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://pairlist6.pair.net/pipermail/nw-modeling-list/attachments/20200110/92ca733b/attachment-0001.html>
-------------- next part --------------
A non-text attachment was scrubbed...
Name: image001.jpg
Type: image/jpeg
Size: 15957 bytes
Desc: not available
URL: <https://pairlist6.pair.net/pipermail/nw-modeling-list/attachments/20200110/92ca733b/attachment-0001.jpg>