Peak ends for Accurail H5 hopper?

[NW Modeling List]

I was looking for the same thing last year. I worked with my son to model an arched end based on dimensions in the Dow book (the overall model dimensions are pretty close to the H5, as I’m sure you also found). 

We printed a prototype - pictures attached. I intend to do some more work on it, and he was going to do some printer tuning, but we haven’t picked it back up yet. 

The arched end was to be the first of a couple changes to the model to give it an N&W look. It is also the easiest and visually the most impactful. 



Matt Goodman
Columbus, Ohio

Sent from my mobile

On Jul 26, 2020, at 4:21 PM, NW Modeling List via NW-Modeling-List <nw-modeling-list at nwhs.org> wrote:

 Does anyone make detail parts for the Accurail N&W H5 hoppers such as peak ends?

Regards,

Dutch


Sent from Yahoo Mail for iPhone
________________________________________
NW-Modeling-List at nwhs.org
To change your subscription go to
http://list.nwhs.org/mailman/options/nw-modeling-list
Browse the NW-Modeling-List archives at
http://list.nwhs.org/pipermail/nw-modeling-list/
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://pairlist6.pair.net/pipermail/nw-modeling-list/attachments/20200727/61aa5f4f/attachment-0001.html>
-------------- next part --------------
A non-text attachment was scrubbed...
Name: image0.jpeg
Type: image/jpeg
Size: 99209 bytes
Desc: not available
URL: <https://pairlist6.pair.net/pipermail/nw-modeling-list/attachments/20200727/61aa5f4f/attachment-0002.jpeg>
-------------- next part --------------
A non-text attachment was scrubbed...
Name: image1.jpeg
Type: image/jpeg
Size: 84689 bytes
Desc: not available
URL: <https://pairlist6.pair.net/pipermail/nw-modeling-list/attachments/20200727/61aa5f4f/attachment-0003.jpeg>