N&W caboose project Spring Mills Depot status

[NW Modeling List]

Matt and all the gentlemen:

Computer network problems over the weekend... arggg.
ok

The article is the cut and pasted writeup of Matt Goodman's with his 
photos nested in the word document.
Matt I would like to sent it back to you since you are the author of the 
AMF CF caboose article.

Eric Raitch
Gainesville, VA
eraitch at primary.net


On 2020-08-15 15:50, NW Modeling List via NW-Modeling-List wrote:
> I’ve also done a write-up on a forum years ago. I went looking for it
> today and found it’s been removed. Luckily I decided to transcribe the
> content to a local document last year. I.e., I still have it. All the
> photos are stored on a photo sharing site, so they were safe all
> along.
> 
> The photos, minus descriptions are here:
> https://goodman312.zenfolio.com/nw_amb_caboose
> 
> Being a “real time” forum build, the description is more of a
> narrative rather than step by step. One day, I’ll build it into a
> concise document - or add the descriptions to the image gallery.
> 
> In any case, it came out well enough to place first at a regional and
> national NMRA convention.
> 
> Matt Goodman
> Columbus, Ohio, US
> 
> 
> 
> On Aug 14, 2020, at 6:17 PM, NW Modeling List 
> <nw-modeling-list at nwhs.org> wrote:
> 
> Roger
> I have a write up and photos on how to build the AMF CF kit.
> its a word doc 1.9Mbs if there is a way to email it or as an 
> attachment.
> Eric
> Gainesville, va
> 
> 
> On 2020-08-14 13:55, NW Modeling List via NW-Modeling-List wrote:
>> I've given up on their project. They are so far behind on prior
>> projects the N&W cabins are too far in the future for me. I'm 70 and
>> probably won't ever live long enough at the rate they complete a
>> project to see one. They do great cars but they are seriously lacking
>> in communication skills.
>> Wish someone else were doing them. The latest plastic releases from
>> Atlas and Athearn are pretty nice and detailed enough for me if only
>> they would do a CF, CG or CH for us.
>> I'm looking for old Westside/Balboa cars. I thought about the AMB CF
>> but I've never dealt with a laser kit.
>> Roger Huber
>> Deer Creek Locomotive Works
>> ________________________________________
>> NW-Modeling-List at nwhs.org
>> To change your subscription go to
>> http://list.nwhs.org/mailman/options/nw-modeling-list
>> Browse the NW-Modeling-List archives at
>> http://list.nwhs.org/pipermail/nw-modeling-list/
> ________________________________________
> NW-Modeling-List at nwhs.org
> To change your subscription go to
> http://list.nwhs.org/mailman/options/nw-modeling-list
> Browse the NW-Modeling-List archives at
> http://list.nwhs.org/pipermail/nw-modeling-list/
> 
> ________________________________________
> NW-Modeling-List at nwhs.org
> To change your subscription go to
> http://list.nwhs.org/mailman/options/nw-modeling-list
> Browse the NW-Modeling-List archives at
> http://list.nwhs.org/pipermail/nw-modeling-list/