HO N&W Steam Decals

[NW Modeling List]

I model 1938, so could use a set that includes cab lettering. FYI, in case you are tracking demand, Ken. 

Matt Goodman
Columbus, Ohio

Sent from my mobile

On Sep 20, 2020, at 12:06 PM, NW Modeling List <nw-modeling-list at nwhs.org> wrote:

Marty

The Society can do the N&W steam decals, the Microscale set is a bit undersized for the 10 inch letters. However, we have to order a fairly high number of sets to keep the pricing reasonable, and therefore demand must be there for the investment of time.

They can be done with correct builder’s plates and class plates (Class J plates were chromed, I believe the streamlined K2 plates were also chromed) and bronze for most of the others, the Y3s were cast iron I know for sure, class plates bronze.

We could also include the correct early small cab size lettering, and the aluminum color lettering for passenger power.

It all depends on demand.

Best
Ken Miller

> On Sep 20, 2020, at 10:41 AM, NW Modeling List <nw-modeling-list at nwhs.org> wrote:
> 
> Marty,
> 
> I checked the ShellSclae, K4,  and Tichy offerings but there is nothing really on point; Tichy offers the stripe set for the J, and has a generic set of builders plates. Otherwise zilch.  Perhaps the NWHS Modeling committee could address this issue.
> 
> Jim Brewer
> 
> On Sat, Sep 19, 2020 at 8:48 PM NW Modeling List <nw-modeling-list at nwhs.org> wrote:
> Other than Microscale, are there any choices for HO scale N&W steam locomotive decals that include the builders plates and class badges?  I ordered Microscale's latest revision, and while it does finally put the builders plates and class badges in more of a bronze or brass color instead of dulux gold like the lettering, it still has a poor selection of classes repesented on the plates and badges.  There are no A's, and no Y's other than Y6b.  Their O scale revision includes these additional classes, so it is frustrating that the HO version still does not.  I've looked around but can't find any currently in production other than Microscale.  I know the Champ sets don't have the plates and badges I am looking for.  Are there any options besides finding an appropriately sized "A" in another set and combining it with the Microscale?
> 
> Marty Flick
> 
> ________________________________________
> NW-Modeling-List at nwhs.org
> To change your subscription go to
> http://list.nwhs.org/mailman/options/nw-modeling-list
> Browse the NW-Modeling-List archives at
> http://list.nwhs.org/pipermail/nw-modeling-list/
> ________________________________________
> NW-Modeling-List at nwhs.org
> To change your subscription go to
> http://list.nwhs.org/mailman/options/nw-modeling-list
> Browse the NW-Modeling-List archives at
> http://list.nwhs.org/pipermail/nw-modeling-list/

________________________________________
NW-Modeling-List at nwhs.org
To change your subscription go to
http://list.nwhs.org/mailman/options/nw-modeling-list
Browse the NW-Modeling-List archives at
http://list.nwhs.org/pipermail/nw-modeling-list/