HO scale decals (NW Modeling List)

NW Modeling List nw-modeling-list at nwhs.org
Mon Sep 21 19:53:50 EDT 2020 

While excursion era 611 decals have no interest for me I think Marty has the right idea. If going for the ultimate steam set then that should also be a part of it.
Roger HuberDeer Creek Locomotive Works 

    On Monday, September 21, 2020, 03:46:10 PM CDT, NW Modeling List <nw-modeling-list at nwhs.org> wrote:  
 
 Not to open up a can of worms, because I know some people are sensitive about this, but any possibility of throwing in a couple of excursion era graphics for 611 on the decal sheet?  For example, decals for the Robert Claytor plaque and the "I am the thoroughbred of steam..." sticker?
I'd buy the set either way, but if we are going for the ultimate N&W steam decal set, why not include as much as possible?
Marty Flick


-----------------------------------------
From: "NW Modeling List" 
To: "NW Modeling List"
Cc: 
Sent: Sunday September 20 2020 6:45:42PM
Subject: Re: HO scale decals (NW Modeling List)

Richard and I have already been discussing this and it will be correct. Believe me.

Besides builders and class plates, I am thinking headlight number boards, number plates, all sizes and designs of steam, cabside lettering, appropriate tender tank lettering, etc. etc.

Ken Miller

> On Sep 20, 2020, at 1:39 PM, NW Modeling List <nw-modeling-list at nwhs.org> wrote:
> 
> All
> 
> I would love to see some N&W Steam Decals produced with research and techniques up to 2020 standards. The B&O folks just got a set in the last year with the correct lettering style. Archive research throughout the hobby has brought these fine details to the fore. Let's include a detailed usage guide so you don't have to guess about which lettering size goes where.
> 
> But please let's not forget about some of the smaller size locos like G, M and W and maybe we can get some of those older brass models out of closets and from underneath layouts and taking places of honor on top of the layout. No. 6 has gathered a lot of dust waiting.
> 
> Stoney
> Rick C. Stone
> NWHS #0001
> 
> 
>> On September 20, 2020 at 12:42 PM nw-modeling-list-request at nwhs.org wrote:
>> 
>> 
>> Send NW-Modeling-List mailing list submissions to
>> nw-modeling-list at nwhs.org
>> 
>> To subscribe or unsubscribe via the World Wide Web, visit
>> https://pairlist6.pair.net/mailman/listinfo/nw-modeling-list< a=""> />>> or, via email, send a message with subject or body 'help' to
>> nw-modeling-list-request at nwhs.org
>> 
>> You can reach the person managing the list at
>> nw-modeling-list-owner at nwhs.org
>> 
>> When replying, please edit your Subject line so it is more specific
>> than "Re: Contents of NW-Modeling-List digest..."
>> 
>> 
>> Today's Topics:
>> 
>> 1. HO scale decals (NW Modeling List)
>> 2. Re: HO N&W Steam Decals (NW Modeling List)
>> 3. Re: HO scale decals (NW Modeling List)
>> 4. Re: HO N&W Steam Decals (NW Modeling List)
>> 5. Re: HO N&W Steam Decals (NW Modeling List)
>> 6. Re: HO scale decals (NW Modeling List)
>> 7. Re: HO N&W Steam Decals (NW Modeling List)
>> 
>> 
>> ----------------------------------------------------------------------
>> 
>> Message: 1
>> Date: Sun, 20 Sep 2020 07:21:04 +0000 (UTC)
>> From: NW Modeling List <nw-modeling-list at nwhs.org>
>> To: NW model list <nw-modeling-list at nwhs.org>
>> Subject: HO scale decals
>> Message-ID: <mailman.1082.1600597750.10487.nw-modeling-list at nwhs.org>
>> Content-Type: text/plain; charset="utf-8"
>> 
>> It would be nice to have these decals in n-scale.
>> Jeff Wood
>> -------------- next part --------------
>> An HTML attachment was scrubbed...
>> URL: <<>https://pairlist6.pair.net/pipermail/nw-modeling-list/attachments/20200920/2dc67517/attachment-0001.html>< a=""> />>> 
>> ------------------------------
>> 
>> Message: 2
>> Date: Sun, 20 Sep 2020 10:41:56 -0400
>> From: NW Modeling List <nw-modeling-list at nwhs.org>
>> To: NW Modeling List <nw-modeling-list at nwhs.org>
>> Subject: Re: HO N&W Steam Decals
>> Message-ID: <mailman.1090.1600616133.10487.nw-modeling-list at nwhs.org>
>> Content-Type: text/plain; charset="utf-8"
>> 
>> Marty,
>> 
>> I checked the ShellSclae, K4, and Tichy offerings but there is nothing
>> really on point; Tichy offers the stripe set for the J, and has a generic
>> set of builders plates. Otherwise zilch. Perhaps the NWHS Modeling
>> committee could address this issue.
>> 
>> Jim Brewer
>> 
>> On Sat, Sep 19, 2020 at 8:48 PM NW Modeling List <nw-modeling-list at nwhs.org>
>> wrote:
>> 
>>> Other than Microscale, are there any choices for HO scale N&W steam
>>> locomotive decals that include the builders plates and class badges? I
>>> ordered Microscale's latest revision, and while it does finally put the
>>> builders plates and class badges in more of a bronze or brass color instead
>>> of dulux gold like the lettering, it still has a poor selection of classes
>>> repesented on the plates and badges. There are no A's, and no Y's other
>>> than Y6b. Their O scale revision includes these additional classes, so it
>>> is frustrating that the HO version still does not. I've looked around but
>>> can't find any currently in production other than Microscale. I know the
>>> Champ sets don't have the plates and badges I am looking for. Are there
>>> any options besides finding an appropriately sized "A" in another set and
>>> combining it with the Microscale?
>>> 
>>> Marty Flick
>>> 
>>> ________________________________________
>>> NW-Modeling-List at nwhs.org
>>> To change your subscription go to
>>> <>http://list.nwhs.org/mailman/options/nw-modeling-list< a=""> />>>> Browse the NW-Modeling-List archives at
>>> <>http://list.nwhs.org/pipermail/nw-modeling-list/< a=""> />>>> 
>> -------------- next part --------------
>> An HTML attachment was scrubbed...
>> URL: <<>https://pairlist6.pair.net/pipermail/nw-modeling-list/attachments/20200920/06d52421/attachment-0001.html>< a=""> />>> 
>> ------------------------------
>> 
>> Message: 3
>> Date: Sun, 20 Sep 2020 09:38:46 -0400
>> From: NW Modeling List <nw-modeling-list at nwhs.org>
>> To: NW Modeling List <nw-modeling-list at nwhs.org>
>> Subject: Re: HO scale decals
>> Message-ID: <mailman.1091.1600616142.10487.nw-modeling-list at nwhs.org>
>> Content-Type: text/plain; charset="utf-8"; Format="flowed"
>> 
>> I agree, But I doubt if it will be done, We seem to be in the minority
>> 
>> Joe Grzelak
>> 
>> On 9/20/2020 3:21 AM, NW Modeling List wrote:
>>> It would be nice to have these decals in n-scale.
>>> 
>>> Jeff Wood
>>> 
>>> ________________________________________
>>> NW-Modeling-List at nwhs.org
>>> To change your subscription go to
>>> <>http://list.nwhs.org/mailman/options/nw-modeling-list< a=""> />>>> Browse the NW-Modeling-List archives at
>>> <>http://list.nwhs.org/pipermail/nw-modeling-list/< a=""> />>> -------------- next part --------------
>> An HTML attachment was scrubbed...
>> URL: <<>https://pairlist6.pair.net/pipermail/nw-modeling-list/attachments/20200920/52d24f64/attachment-0001.html>< a=""> />>> 
>> ------------------------------
>> 
>> Message: 4
>> Date: Sun, 20 Sep 2020 11:42:22 -0400
>> From: NW Modeling List <nw-modeling-list at nwhs.org>
>> To: NW Modeling List <nw-modeling-list at nwhs.org>
>> Subject: Re: HO N&W Steam Decals
>> Message-ID: <mailman.1094.1600617989.10487.nw-modeling-list at nwhs.org>
>> Content-Type: text/plain; charset=utf-8
>> 
>> Marty
>> 
>> The Society can do the N&W steam decals, the Microscale set is a bit undersized for the 10 inch letters. However, we have to order a fairly high number of sets to keep the pricing reasonable, and therefore demand must be there for the investment of time.
>> 
>> They can be done with correct builder?s plates and class plates (Class J plates were chromed, I believe the streamlined K2 plates were also chromed) and bronze for most of the others, the Y3s were cast iron I know for sure, class plates bronze.
>> 
>> We could also include the correct early small cab size lettering, and the aluminum color lettering for passenger power.
>> 
>> It all depends on demand.
>> 
>> Best
>> Ken Miller
>> 
>>> On Sep 20, 2020, at 10:41 AM, NW Modeling List <nw-modeling-list at nwhs.org> wrote:
>>> 
>>> Marty,
>>> 
>>> I checked the ShellSclae, K4, and Tichy offerings but there is nothing really on point; Tichy offers the stripe set for the J, and has a generic set of builders plates. Otherwise zilch. Perhaps the NWHS Modeling committee could address this issue.
>>> 
>>> Jim Brewer
>>> 
>>> On Sat, Sep 19, 2020 at 8:48 PM NW Modeling List <nw-modeling-list at nwhs.org> wrote:
>>> Other than Microscale, are there any choices for HO scale N&W steam locomotive decals that include the builders plates and class badges? I ordered Microscale's latest revision, and while it does finally put the builders plates and class badges in more of a bronze or brass color instead of dulux gold like the lettering, it still has a poor selection of classes repesented on the plates and badges. There are no A's, and no Y's other than Y6b. Their O scale revision includes these additional classes, so it is frustrating that the HO version still does not. I've looked around but can't find any currently in production other than Microscale. I know the Champ sets don't have the plates and badges I am looking for. Are there any options besides finding an appropriately sized "A" in another set and combining it with the Microscale?
>>> 
>>> Marty Flick
>>> 
>>> ________________________________________
>>> NW-Modeling-List at nwhs.org
>>> To change your subscription go to
>>> <>http://list.nwhs.org/mailman/options/nw-modeling-list< a=""> />>>> Browse the NW-Modeling-List archives at
>>> <>http://list.nwhs.org/pipermail/nw-modeling-list/< a=""> />>>> ________________________________________
>>> NW-Modeling-List at nwhs.org
>>> To change your subscription go to
>>> <>http://list.nwhs.org/mailman/options/nw-modeling-list< a=""> />>>> Browse the NW-Modeling-List archives at
>>> <>http://list.nwhs.org/pipermail/nw-modeling-list/< a=""> />>> 
>> 
>> 
>> ------------------------------
>> 
>> Message: 5
>> Date: Sun, 20 Sep 2020 16:30:38 +0000
>> From: NW Modeling List <nw-modeling-list at nwhs.org>
>> To: "'NW Modeling List'" <nw-modeling-list at nwhs.org>
>> Subject: Re: HO N&W Steam Decals
>> Message-ID: <mailman.1095.1600619825.10487.nw-modeling-list at nwhs.org>
>> Content-Type: text/plain; charset="utf-8"
>> 
>> Two questions then:
>> How do we show our interest for the Society to gauge demand?
>> Rather than the Society invest in the production, could you first
>> engage with MicroScale to offer a further update of their decal?
>> Marty Flick
>> 
>> -----------------------------------------From: "NW Modeling List" 
>> To: "NW Modeling List"
>> Cc: 
>> Sent: Sunday September 20 2020 12:23:08PM
>> Subject: Re: HO N&W Steam Decals
>> 
>> Marty
>> 
>> The Society can do the N&W steam decals, the Microscale set is a bit
>> undersized for the 10 inch letters. However, we have to order a fairly
>> high number of sets to keep the pricing reasonable, and therefore
>> demand must be there for the investment of time.
>> 
>> They can be done with correct builder?s plates and class plates
>> (Class J plates were chromed, I believe the streamlined K2 plates were
>> also chromed) and bronze for most of the others, the Y3s were cast
>> iron I know for sure, class plates bronze.
>> 
>> We could also include the correct early small cab size lettering, and
>> the aluminum color lettering for passenger power.
>> 
>> It all depends on demand.
>> 
>> Best
>> Ken Miller
>> 
>>> On Sep 20, 2020, at 10:41 AM, NW Modeling List wrote:
>>> 
>>> Marty,
>>> 
>>> I checked the ShellSclae, K4, and Tichy offerings but there is
>> nothing really on point; Tichy offers the stripe set for the J, and
>> has a generic set of builders plates. Otherwise zilch. Perhaps the
>> NWHS Modeling committee could address this issue.
>>> 
>>> Jim Brewer
>>> 
>>> On Sat, Sep 19, 2020 at 8:48 PM NW Modeling List wrote:
>>> Other than Microscale, are there any choices for HO scale N&W steam
>> locomotive decals that include the builders plates and class badges? I
>> ordered Microscale's latest revision, and while it does finally put
>> the builders plates and class badges in more of a bronze or brass
>> color instead of dulux gold like the lettering, it still has a poor
>> selection of classes repesented on the plates and badges. There are no
>> A's, and no Y's other than Y6b. Their O scale revision includes these
>> additional classes, so it is frustrating that the HO version still
>> does not. I've looked around but can't find any currently in
>> production other than Microscale. I know the Champ sets don't have the
>> plates and badges I am looking for. Are there any options besides
>> finding an appropriately sized "A" in another set and combining it
>> with the Microscale?
>>> 
>>> Marty Flick
>>> 
>>> ________________________________________
>>> NW-Modeling-List at nwhs.org
>>> To change your subscription go to
>>>> ________________________________________
>>> NW-Modeling-List at nwhs.org
>>> To change your subscription go to
>>> 
>> ________________________________________
>> NW-Modeling-List at nwhs.org
>> To change your subscription go to
>> 
>> 
>> Links:
>> ------
>> [1] <>http://list.nwhs.org/mailman/options/nw-modeling-list< a=""> />>> <>http://list.nwhs.org/mailman/options/nw-modeling-list< a=""> />>> /> Browse the NW-Modeling-List archives at
>> </br<></a><a href=
>> 
>> -------------- next part --------------
>> An HTML attachment was scrubbed...
>> URL: <<>https://pairlist6.pair.net/pipermail/nw-modeling-list/attachments/20200920/0d27884a/attachment-0001.html>< a=""> />>> 
>> ------------------------------
>> 
>> Message: 6
>> Date: Sun, 20 Sep 2020 16:33:37 +0000
>> From: NW Modeling List <nw-modeling-list at nwhs.org>
>> To: "'NW Modeling List'" <nw-modeling-list at nwhs.org>
>> Subject: Re: HO scale decals
>> Message-ID: <mailman.1096.1600619825.10487.nw-modeling-list at nwhs.org>
>> Content-Type: text/plain; charset="utf-8"
>> 
>> Microscale does offer their N&W steam set in N scale. I believe it is
>> identical to the HO, so the limited builders plates and class badges
>> remain. If Microscale were to further revise their HO set, the N scale
>> would probably receive the same updates.
>> Marty Flick
>> 
>> -----------------------------------------From: "NW Modeling List" 
>> To: "NW Modeling List"
>> Cc: 
>> Sent: Sunday September 20 2020 11:43:08AM
>> Subject: Re: HO scale decals
>> 
>> I agree, But I doubt if it will be done, We seem to be in the
>> minority 
>> 
>> Joe Grzelak
>> On 9/20/2020 3:21 AM, NW Modeling List wrote:
>> It would be nice to have these decals in n-scale. 
>> Jeff Wood 
>> 
>> ________________________________________ NW-Modeling-List at nwhs.org
>> [1] To change your subscription go to 
>> <>[2]http://list.nwhs.org/mailman/options/nw-modeling-list [3] Browse
>> the NW-Modeling-List archives at 
>> [4]http://list.nwhs.org/pipermail/nw-modeling-list/ [5] 
>> 
>> Links:
>> ------
>> [1] mailto:NW-Modeling-List at nwhs.org
>> [2] http://list.nwhs.org/mailman/options/nw-modeling-list< a=""> />>> [3] <>http://list.nwhs.org/mailman/options/nw-modeling-list< a=""> />>> [4] <>http://list.nwhs.org/pipermail/nw-modeling-list/< a=""> />>> [5] <>http://list.nwhs.org/pipermail/nw-modeling-list/< a=""> />>> 
>> -------------- next part --------------
>> An HTML attachment was scrubbed...
>> URL: <<>https://pairlist6.pair.net/pipermail/nw-modeling-list/attachments/20200920/d3915e97/attachment-0001.html>< a=""> />>> 
>> ------------------------------
>> 
>> Message: 7
>> Date: Sun, 20 Sep 2020 16:40:33 +0000 (UTC)
>> From: NW Modeling List <nw-modeling-list at nwhs.org>
>> To: nw-modeling-list at nwhs.org
>> Subject: Re: HO N&W Steam Decals
>> Message-ID: <mailman.1100.1600620144.10487.nw-modeling-list at nwhs.org>
>> Content-Type: text/plain; charset="utf-8"
>> 
>> ?Up to the minute update: With the assistance of the Society, ShellScale Decals will be producing the steam set in 2021 in HO, O and N Scale.?If you are familiar with our quality you know this will be a good thing.?Richard D. ShellShellScale Decals?In a message dated 9/20/2020 12:37:11 PM Eastern Standard Time, nw-modeling-list at nwhs.org writes:?
>> Two questions then:?How do we show our interest for the Society to gauge demand??Rather than the Society invest in the production, could you first engage with MicroScale to offer a further update of their decal??Marty Flick
>> 
>> ?
>> -----------------------------------------
>> From: "NW Modeling List" 
>> To: "NW Modeling List"
>> Cc: 
>> Sent: Sunday September 20 2020 12:23:08PM
>> Subject: Re: HO N&W Steam Decals
>> 
>> Marty
>> 
>> The Society can do the N&W steam decals, the Microscale set is a bit undersized for the 10 inch letters. However, we have to order a fairly high number of sets to keep the pricing reasonable, and therefore demand must be there for the investment of time.
>> 
>> They can be done with correct builder?s plates and class plates (Class J plates were chromed, I believe the streamlined K2 plates were also chromed) and bronze for most of the others, the Y3s were cast iron I know for sure, class plates bronze.
>> 
>> We could also include the correct early small cab size lettering, and the aluminum color lettering for passenger power.
>> 
>> It all depends on demand.
>> 
>> Best
>> Ken Miller
>> 
>>> On Sep 20, 2020, at 10:41 AM, NW Modeling List <nw-modeling-list at nwhs.org> wrote:
>>> 
>>> Marty,
>>> 
>>> I checked the ShellSclae, K4, and Tichy offerings but there is nothing really on point; Tichy offers the stripe set for the J, and has a generic set of builders plates. Otherwise zilch. Perhaps the NWHS Modeling committee could address this issue.
>>> 
>>> Jim Brewer
>>> 
>>> On Sat, Sep 19, 2020 at 8:48 PM NW Modeling List <nw-modeling-list at nwhs.org> wrote:
>>> Other than Microscale, are there any choices for HO scale N&W steam locomotive decals that include the builders plates and class badges? I ordered Microscale's latest revision, and while it does finally put the builders plates and class badges in more of a bronze or brass color instead of dulux gold like the lettering, it still has a poor selection of classes repesented on the plates and badges. There are no A's, and no Y's other than Y6b. Their O scale revision includes these additional classes, so it is frustrating that the HO version still does not. I've looked around but can't find any currently in production other than Microscale. I know the Champ sets don't have the plates and badges I am looking for. Are there any options besides finding an appropriately sized "A" in another set and combining it with the Microscale?
>>> 
>>> Marty Flick
>>> 
>>> ________________________________________
>>> NW-Modeling-List at nwhs.org
>>> To change your subscription go to
>>> <>http://list.nwhs.org/mailman/options/nw-modeling-list< a=""> /> > Browse the NW-Modeling-List archives at
>>> <>http://list.nwhs.org/pipermail/nw-modeling-list/< a=""> /> > ________________________________________
>>> NW-Modeling-List at nwhs.org
>>> To change your subscription go to
>>> <>http://list.nwhs.org/mailman/options/nw-modeling-list< a=""> /> > Browse the NW-Modeling-List archives at
>>> <>http://list.nwhs.org/pipermail/nw-modeling-list/< a=""> /> 
>> ________________________________________
>> NW-Modeling-List at nwhs.org
>> To change your subscription go to
>> <>http://list.nwhs.org/mailman/options/nw-modeling-list< a=""> /> Browse the NW-Modeling-List archives at
>> <>http://list.nwhs.org/pipermail/nw-modeling-list/< a=""> /> <>________________________________________
>> NW-Modeling-List at nwhs.org
>> To change your subscription go to
>> http://list.nwhs.org/mailman/options/nw-modeling-list< a=""> />>> Browse the NW-Modeling-List archives at
>> <>http://list.nwhs.org/pipermail/nw-modeling-list/< a=""> />>> 
>> -------------- next part --------------
>> An HTML attachment was scrubbed...
>> URL: <<>https://pairlist6.pair.net/pipermail/nw-modeling-list/attachments/20200920/f238e05e/attachment.html>< a=""> />>> 
>> ------------------------------
>> 
>> Subject: Digest Footer
>> 
>> ________________________________________
>> NW-Modeling-List at nwhs.org
>> To change your subscription go to
>> <>http://list.nwhs.org/mailman/options/nw-modeling-list< a=""> />>> Browse the NW-Mailing-List archives at
>> <>http://list.nwhs.org/pipermail/nw-modeling< a=""> />>> 
>> 
>> ------------------------------
>> 
>> End of NW-Modeling-List Digest, Vol 211, Issue 10
>> *************************************************
> ________________________________________
> NW-Modeling-List at nwhs.org
> To change your subscription go to
> <>http://list.nwhs.org/mailman/options/nw-modeling-list< a=""> />> Browse the NW-Modeling-List archives at
> <>http://list.nwhs.org/pipermail/nw-modeling-list/< a=""> />
________________________________________
NW-Modeling-List at nwhs.org
To change your subscription go to
<>http://list.nwhs.org/mailman/options/nw-modeling-list< a=""> />Browse the NW-Modeling-List archives at
<>http://list.nwhs.org/pipermail/nw-modeling-list/< a=""> /><>________________________________________
NW-Modeling-List at nwhs.org
To change your subscription go to
http://list.nwhs.org/mailman/options/nw-modeling-list
Browse the NW-Modeling-List archives at
http://list.nwhs.org/pipermail/nw-modeling-list/
  
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://pairlist6.pair.net/pipermail/nw-modeling-list/attachments/20200921/dd478a97/attachment-0001.html>

More information about the NW-Modeling-List mailing list