HO scale K2 was HO Scale decals (NW Modeling List)
NW Modeling List
nw-modeling-list at nwhs.org
Sun Sep 27 19:53:35 EDT 2020
I used to have one of the brass K2a's. I didn't think that it was done very well. Especially the skyline casing.Jimmy LisleSent from my Verizon, Samsung Galaxy smartphone
There is a brass K2 out there in small numbers. The quantity of shells for which there would be a market in plastic is in the dozens, too few for the big manufacturer but just right for 3D printers who produce to the demand. Browser produced mountain drive kits and there are still many good IHC mountains out there.
Jeff Cornelius
On Tuesday, September 22, 2020 NW Modeling List via NW-Modeling-List <nw-modeling-list at nwhs.org> wrote:Slim and none. And that is optimistic!
You can, however, get a K2 in O scale.
Jim Kehn
-----Original Message-----
From: NW Modeling List <nw-modeling-list at nwhs.org>
To: NW Modeling List <nw-modeling-list at nwhs.org>
Sent: Tue, Sep 22, 2020 7:17 pm
Subject: Re: HO scale decals (NW Modeling List)
This is just a question for th group what do y’all think the odds would be that we could get a plastic or die cast model of the N&W K2 K2A Streamlined locomotives in ho scale? Thanks for your thoughts and hope everyone is doing well.
Sincerely,
Jeff Mueller
On Sep 22, 2020, at 5:03 PM, NW Modeling List <nw-modeling-list at nwhs.org> wrote:
I like your idea and would use the decals you propose.
Walter Davis, Youngsville, NC
On 9/22/2020 11:24 AM, NW Modeling List
wrote:
One other factor to consider when the time comes to put together
the decal sheet. Do you include extra builders plates and class
badges for known factory painted models that are lacking them,
like the Broadway A's and J's? Bare in mind I am not expecting an
answer on this, just trying to generate discussion as Shellscale
and the Society decide what needs to be included in the set, and
how many of each. But I do think there will be a market not just
for people painting models for the first time, but also people who
have either factory or custom painted models that they would want
to go back and add these details to. If I have to buy 6 sets to
apply builders plates to 8 engines, I will, but if I could do the
same number of engines and only buy 2 sets, that would be great.
It all depends on how many decals you have to arrange on the
sheet, or sheets (A lot of Shellscale sets have used 2 sheets).
Also, one revision I like on the most recent Microscale sheet
is they supplied black backgrounds for the builders plates,
which makes a big difference if applying them to an engine with
a smoke box that lacks the boiler jacketing.
Marty Flick
-----------------------------------------
From: "NW Modeling List via NW-Modeling-List"
To: "NW Modeling List"
Cc: "NW Modeling List"
Sent: Monday September 21 2020 11:23:09PM
Subject: Re: HO scale decals (NW Modeling List)
While excursion era 611
decals have no interest for me I think Marty has the
right idea. If going for the ultimate steam set then
that should also be a part of it.
Roger Huber
Deer Creek Locomotive Works
On Monday, September 21, 2020, 03:46:10 PM CDT, NW
Modeling List <nw-modeling-list at nwhs.org> wrote:
Not to open up a can of worms, because I know
some people are sensitive about this, but any
possibility of throwing in a couple of excursion era
graphics for 611 on the decal sheet? For example,
decals for the Robert Claytor plaque and the "I am
the thoroughbred of steam..." sticker?
I'd buy the set either way, but if we are going
for the ultimate N&W steam decal set, why not
include as much as possible?
Marty Flick
-----------------------------------------
From: "NW Modeling List"
To: "NW Modeling List"
Cc:
Sent: Sunday September 20 2020 6:45:42PM
Subject: Re: HO scale decals (NW Modeling List)
Richard and I have already been discussing this
and it will be correct. Believe me.
Besides builders and class plates, I am thinking
headlight number boards, number plates, all sizes
and designs of steam, cabside lettering,
appropriate tender tank lettering, etc. etc.
Ken Miller
> On Sep 20, 2020, at 1:39 PM, NW Modeling List
<nw-modeling-list at nwhs.org> wrote:
>
> All
>
> I would love to see some N&W Steam Decals
produced with research and techniques up to 2020
standards. The B&O folks just got a set in the
last year with the correct lettering style.
Archive research throughout the hobby has brought
these fine details to the fore. Let's include a
detailed usage guide so you don't have to guess
about which lettering size goes where.
>
> But please let's not forget about some of the
smaller size locos like G, M and W and maybe we
can get some of those older brass models out of
closets and from underneath layouts and taking
places of honor on top of the layout. No. 6 has
gathered a lot of dust waiting.
>
> Stoney
> Rick C. Stone
> NWHS #0001
>
>
>> On September 20, 2020 at 12:42 PM
nw-modeling-list-request at nwhs.org wrote:
>>
>>
>> Send NW-Modeling-List mailing list
submissions to
>> nw-modeling-list at nwhs.org
>>
>> To subscribe or unsubscribe via the World
Wide Web, visit
>> https://pairlist6.pair.net/mailman/listinfo/nw-modeling-list<
a=""> />
>> or, via email, send a message with
subject or body 'help' to
>> nw-modeling-list-request at nwhs.org
>>
>> You can reach the person managing the
list at
>> nw-modeling-list-owner at nwhs.org
>>
>> When replying, please edit your Subject
line so it is more specific
>> than "Re: Contents of NW-Modeling-List
digest..."
>>
>>
>> Today's Topics:
>>
>> 1. HO scale decals (NW Modeling List)
>> 2. Re: HO N&W Steam Decals (NW
Modeling List)
>> 3. Re: HO scale decals (NW Modeling List)
>> 4. Re: HO N&W Steam Decals (NW
Modeling List)
>> 5. Re: HO N&W Steam Decals (NW
Modeling List)
>> 6. Re: HO scale decals (NW Modeling List)
>> 7. Re: HO N&W Steam Decals (NW
Modeling List)
>>
>>
>>
----------------------------------------------------------------------
>>
>> Message: 1
>> Date: Sun, 20 Sep 2020 07:21:04 +0000
(UTC)
>> From: NW Modeling List
<nw-modeling-list at nwhs.org>
>> To: NW model list
<nw-modeling-list at nwhs.org>
>> Subject: HO scale decals
>> Message-ID:
<mailman.1082.1600597750.10487.nw-modeling-list at nwhs.org>
>> Content-Type: text/plain; charset="utf-8"
>>
>> It would be nice to have these decals in
n-scale.
>> Jeff Wood
>> -------------- next part --------------
>> An HTML attachment was scrubbed...
>> URL: <<>https://pairlist6.pair.net/pipermail/nw-modeling-list/attachments/20200920/2dc67517/attachment-0001.html><
a=""> />
>>
>> ------------------------------
>>
>> Message: 2
>> Date: Sun, 20 Sep 2020 10:41:56 -0400
>> From: NW Modeling List
<nw-modeling-list at nwhs.org>
>> To: NW Modeling List
<nw-modeling-list at nwhs.org>
>> Subject: Re: HO N&W Steam Decals
>> Message-ID:
<mailman.1090.1600616133.10487.nw-modeling-list at nwhs.org>
>> Content-Type: text/plain; charset="utf-8"
>>
>> Marty,
>>
>> I checked the ShellSclae, K4, and Tichy
offerings but there is nothing
>> really on point; Tichy offers the stripe
set for the J, and has a generic
>> set of builders plates. Otherwise zilch.
Perhaps the NWHS Modeling
>> committee could address this issue.
>>
>> Jim Brewer
>>
>> On Sat, Sep 19, 2020 at 8:48 PM NW
Modeling List <nw-modeling-list at nwhs.org>
>> wrote:
>>
>>> Other than Microscale, are there any
choices for HO scale N&W steam
>>> locomotive decals that include the
builders plates and class badges? I
>>> ordered Microscale's latest revision,
and while it does finally put the
>>> builders plates and class badges in
more of a bronze or brass color instead
>>> of dulux gold like the lettering, it
still has a poor selection of classes
>>> repesented on the plates and badges.
There are no A's, and no Y's other
>>> than Y6b. Their O scale revision
includes these additional classes, so it
>>> is frustrating that the HO version
still does not. I've looked around but
>>> can't find any currently in
production other than Microscale. I know the
>>> Champ sets don't have the plates and
badges I am looking for. Are there
>>> any options besides finding an
appropriately sized "A" in another set and
>>> combining it with the Microscale?
>>>
>>> Marty Flick
>>>
>>>
________________________________________
>>> NW-Modeling-List at nwhs.org
>>> To change your subscription go to
>>> <>http://list.nwhs.org/mailman/options/nw-modeling-list<
a=""> />
>>> Browse the NW-Modeling-List archives
at
>>> <>http://list.nwhs.org/pipermail/nw-modeling-list/<
a=""> />
>>>
>> -------------- next part --------------
>> An HTML attachment was scrubbed...
>> URL: <<>https://pairlist6.pair.net/pipermail/nw-modeling-list/attachments/20200920/06d52421/attachment-0001.html><
a=""> />
>>
>> ------------------------------
>>
>> Message: 3
>> Date: Sun, 20 Sep 2020 09:38:46 -0400
>> From: NW Modeling List
<nw-modeling-list at nwhs.org>
>> To: NW Modeling List
<nw-modeling-list at nwhs.org>
>> Subject: Re: HO scale decals
>> Message-ID:
<mailman.1091.1600616142.10487.nw-modeling-list at nwhs.org>
>> Content-Type: text/plain;
charset="utf-8"; Format="flowed"
>>
>> I agree, But I doubt if it will be done,
We seem to be in the minority
>>
>> Joe Grzelak
>>
>> On 9/20/2020 3:21 AM, NW Modeling List
wrote:
>>> It would be nice to have these decals
in n-scale.
>>>
>>> Jeff Wood
>>>
>>>
________________________________________
>>> NW-Modeling-List at nwhs.org
>>> To change your subscription go to
>>> <>http://list.nwhs.org/mailman/options/nw-modeling-list<
a=""> />
>>> Browse the NW-Modeling-List archives
at
>>> <>http://list.nwhs.org/pipermail/nw-modeling-list/<
a=""> />
>> -------------- next part --------------
>> An HTML attachment was scrubbed...
>> URL: <<>https://pairlist6.pair.net/pipermail/nw-modeling-list/attachments/20200920/52d24f64/attachment-0001.html><
a=""> />
>>
>> ------------------------------
>>
>> Message: 4
>> Date: Sun, 20 Sep 2020 11:42:22 -0400
>> From: NW Modeling List
<nw-modeling-list at nwhs.org>
>> To: NW Modeling List
<nw-modeling-list at nwhs.org>
>> Subject: Re: HO N&W Steam Decals
>> Message-ID:
<mailman.1094.1600617989.10487.nw-modeling-list at nwhs.org>
>> Content-Type: text/plain; charset=utf-8
>>
>> Marty
>>
>> The Society can do the N&W steam
decals, the Microscale set is a bit undersized for
the 10 inch letters. However, we have to order a
fairly high number of sets to keep the pricing
reasonable, and therefore demand must be there for
the investment of time.
>>
>> They can be done with correct builder?s
plates and class plates (Class J plates were
chromed, I believe the streamlined K2 plates were
also chromed) and bronze for most of the others,
the Y3s were cast iron I know for sure, class
plates bronze.
>>
>> We could also include the correct early
small cab size lettering, and the aluminum color
lettering for passenger power.
>>
>> It all depends on demand.
>>
>> Best
>> Ken Miller
>>
>>> On Sep 20, 2020, at 10:41 AM, NW
Modeling List <nw-modeling-list at nwhs.org>
wrote:
>>>
>>> Marty,
>>>
>>> I checked the ShellSclae, K4, and
Tichy offerings but there is nothing really on
point; Tichy offers the stripe set for the J, and
has a generic set of builders plates. Otherwise
zilch. Perhaps the NWHS Modeling committee could
address this issue.
>>>
>>> Jim Brewer
>>>
>>> On Sat, Sep 19, 2020 at 8:48 PM NW
Modeling List <nw-modeling-list at nwhs.org>
wrote:
>>> Other than Microscale, are there any
choices for HO scale N&W steam locomotive
decals that include the builders plates and class
badges? I ordered Microscale's latest revision,
and while it does finally put the builders plates
and class badges in more of a bronze or brass
color instead of dulux gold like the lettering, it
still has a poor selection of classes repesented
on the plates and badges. There are no A's, and no
Y's other than Y6b. Their O scale revision
includes these additional classes, so it is
frustrating that the HO version still does not.
I've looked around but can't find any currently in
production other than Microscale. I know the Champ
sets don't have the plates and badges I am looking
for. Are there any options besides finding an
appropriately sized "A" in another set and
combining it with the Microscale?
>>>
>>> Marty Flick
>>>
>>>
________________________________________
>>> NW-Modeling-List at nwhs.org
>>> To change your subscription go to
>>> <>http://list.nwhs.org/mailman/options/nw-modeling-list<
a=""> />
>>> Browse the NW-Modeling-List archives
at
>>> <>http://list.nwhs.org/pipermail/nw-modeling-list/<
a=""> />
>>>
________________________________________
>>> NW-Modeling-List at nwhs.org
>>> To change your subscription go to
>>> <>http://list.nwhs.org/mailman/options/nw-modeling-list<
a=""> />
>>> Browse the NW-Modeling-List archives
at
>>> <>http://list.nwhs.org/pipermail/nw-modeling-list/<
a=""> />
>>
>>
>>
>> ------------------------------
>>
>> Message: 5
>> Date: Sun, 20 Sep 2020 16:30:38 +0000
>> From: NW Modeling List
<nw-modeling-list at nwhs.org>
>> To: "'NW Modeling List'"
<nw-modeling-list at nwhs.org>
>> Subject: Re: HO N&W Steam Decals
>> Message-ID:
<mailman.1095.1600619825.10487.nw-modeling-list at nwhs.org>
>> Content-Type: text/plain; charset="utf-8"
>>
>> Two questions then:
>> How do we show our interest for the
Society to gauge demand?
>> Rather than the Society invest in the
production, could you first
>> engage with MicroScale to offer a further
update of their decal?
>> Marty Flick
>>
>>
-----------------------------------------From: "NW
Modeling List"
>> To: "NW Modeling List"
>> Cc:
>> Sent: Sunday September 20 2020 12:23:08PM
>> Subject: Re: HO N&W Steam Decals
>>
>> Marty
>>
>> The Society can do the N&W steam
decals, the Microscale set is a bit
>> undersized for the 10 inch letters.
However, we have to order a fairly
>> high number of sets to keep the pricing
reasonable, and therefore
>> demand must be there for the investment
of time.
>>
>> They can be done with correct builder?s
plates and class plates
>> (Class J plates were chromed, I believe
the streamlined K2 plates were
>> also chromed) and bronze for most of the
others, the Y3s were cast
>> iron I know for sure, class plates
bronze.
>>
>> We could also include the correct early
small cab size lettering, and
>> the aluminum color lettering for
passenger power.
>>
>> It all depends on demand.
>>
>> Best
>> Ken Miller
>>
>>> On Sep 20, 2020, at 10:41 AM, NW
Modeling List wrote:
>>>
>>> Marty,
>>>
>>> I checked the ShellSclae, K4, and
Tichy offerings but there is
>> nothing really on point; Tichy offers the
stripe set for the J, and
>> has a generic set of builders plates.
Otherwise zilch. Perhaps the
>> NWHS Modeling committee could address
this issue.
>>>
>>> Jim Brewer
>>>
>>> On Sat, Sep 19, 2020 at 8:48 PM NW
Modeling List wrote:
>>> Other than Microscale, are there any
choices for HO scale N&W steam
>> locomotive decals that include the
builders plates and class badges? I
>> ordered Microscale's latest revision, and
while it does finally put
>> the builders plates and class badges in
more of a bronze or brass
>> color instead of dulux gold like the
lettering, it still has a poor
>> selection of classes repesented on the
plates and badges. There are no
>> A's, and no Y's other than Y6b. Their O
scale revision includes these
>> additional classes, so it is frustrating
that the HO version still
>> does not. I've looked around but can't
find any currently in
>> production other than Microscale. I know
the Champ sets don't have the
>> plates and badges I am looking for. Are
there any options besides
>> finding an appropriately sized "A" in
another set and combining it
>> with the Microscale?
>>>
>>> Marty Flick
>>>
>>>
________________________________________
>>> NW-Modeling-List at nwhs.org
>>> To change your subscription go to
>>>>
________________________________________
>>> NW-Modeling-List at nwhs.org
>>> To change your subscription go to
>>>
>> ________________________________________
>> NW-Modeling-List at nwhs.org
>> To change your subscription go to
>>
>>
>> Links:
>> ------
>> [1] <>http://list.nwhs.org/mailman/options/nw-modeling-list<
a=""> />
>> <>http://list.nwhs.org/mailman/options/nw-modeling-list<
a=""> />
>> /> Browse the NW-Modeling-List
archives at
>> </br<></a><a href=
>>
>> -------------- next part --------------
>> An HTML attachment was scrubbed...
>> URL: <<>https://pairlist6.pair.net/pipermail/nw-modeling-list/attachments/20200920/0d27884a/attachment-0001.html><
a=""> />
>>
>> ------------------------------
>>
>> Message: 6
>> Date: Sun, 20 Sep 2020 16:33:37 +0000
>> From: NW Modeling List
<nw-modeling-list at nwhs.org>
>> To: "'NW Modeling List'"
<nw-modeling-list at nwhs.org>
>> Subject: Re: HO scale decals
>> Message-ID:
<mailman.1096.1600619825.10487.nw-modeling-list at nwhs.org>
>> Content-Type: text/plain; charset="utf-8"
>>
>> Microscale does offer their N&W steam
set in N scale. I believe it is
>> identical to the HO, so the limited
builders plates and class badges
>> remain. If Microscale were to further
revise their HO set, the N scale
>> would probably receive the same updates.
>> Marty Flick
>>
>>
-----------------------------------------From: "NW
Modeling List"
>> To: "NW Modeling List"
>> Cc:
>> Sent: Sunday September 20 2020 11:43:08AM
>> Subject: Re: HO scale decals
>>
>> I agree, But I doubt if it will be done,
We seem to be in the
>> minority
>>
>> Joe Grzelak
>> On 9/20/2020 3:21 AM, NW Modeling List
wrote:
>> It would be nice to have these decals in
n-scale.
>> Jeff Wood
>>
>> ________________________________________
NW-Modeling-List at nwhs.org
>> [1] To change your subscription go to
>> <>[2]http://list.nwhs.org/mailman/options/nw-modeling-list
[3] Browse
>> the NW-Modeling-List archives at
>> [4]http://list.nwhs.org/pipermail/nw-modeling-list/
[5]
>>
>> Links:
>> ------
>> [1] mailto:NW-Modeling-List at nwhs.org
>> [2] http://list.nwhs.org/mailman/options/nw-modeling-list<
a=""> />
>> [3] <>http://list.nwhs.org/mailman/options/nw-modeling-list<
a=""> />
>> [4] <>http://list.nwhs.org/pipermail/nw-modeling-list/<
a=""> />
>> [5] <>http://list.nwhs.org/pipermail/nw-modeling-list/<
a=""> />
>>
>> -------------- next part --------------
>> An HTML attachment was scrubbed...
>> URL: <<>https://pairlist6.pair.net/pipermail/nw-modeling-list/attachments/20200920/d3915e97/attachment-0001.html><
a=""> />
>>
>> ------------------------------
>>
>> Message: 7
>> Date: Sun, 20 Sep 2020 16:40:33 +0000
(UTC)
>> From: NW Modeling List
<nw-modeling-list at nwhs.org>
>> To: nw-modeling-list at nwhs.org
>> Subject: Re: HO N&W Steam Decals
>> Message-ID:
<mailman.1100.1600620144.10487.nw-modeling-list at nwhs.org>
>> Content-Type: text/plain; charset="utf-8"
>>
>> ?Up to the minute update: With the
assistance of the Society, ShellScale Decals will
be producing the steam set in 2021 in HO, O and N
Scale.?If you are familiar with our quality you
know this will be a good thing.?Richard D.
ShellShellScale Decals?In a message dated
9/20/2020 12:37:11 PM Eastern Standard Time,
nw-modeling-list at nwhs.org writes:?
>> Two questions then:?How do we show our
interest for the Society to gauge demand??Rather
than the Society invest in the production, could
you first engage with MicroScale to offer a
further update of their decal??Marty Flick
>>
>> ?
>> -----------------------------------------
>> From: "NW Modeling List"
>> To: "NW Modeling List"
>> Cc:
>> Sent: Sunday September 20 2020 12:23:08PM
>> Subject: Re: HO N&W Steam Decals
>>
>> Marty
>>
>> The Society can do the N&W steam
decals, the Microscale set is a bit undersized for
the 10 inch letters. However, we have to order a
fairly high number of sets to keep the pricing
reasonable, and therefore demand must be there for
the investment of time.
>>
>> They can be done with correct builder?s
plates and class plates (Class J plates were
chromed, I believe the streamlined K2 plates were
also chromed) and bronze for most of the others,
the Y3s were cast iron I know for sure, class
plates bronze.
>>
>> We could also include the correct early
small cab size lettering, and the aluminum color
lettering for passenger power.
>>
>> It all depends on demand.
>>
>> Best
>> Ken Miller
>>
>>> On Sep 20, 2020, at 10:41 AM, NW
Modeling List <nw-modeling-list at nwhs.org>
wrote:
>>>
>>> Marty,
>>>
>>> I checked the ShellSclae, K4, and
Tichy offerings but there is nothing really on
point; Tichy offers the stripe set for the J, and
has a generic set of builders plates. Otherwise
zilch. Perhaps the NWHS Modeling committee could
address this issue.
>>>
>>> Jim Brewer
>>>
>>> On Sat, Sep 19, 2020 at 8:48 PM NW
Modeling List <nw-modeling-list at nwhs.org>
wrote:
>>> Other than Microscale, are there any
choices for HO scale N&W steam locomotive
decals that include the builders plates and class
badges? I ordered Microscale's latest revision,
and while it does finally put the builders plates
and class badges in more of a bronze or brass
color instead of dulux gold like the lettering, it
still has a poor selection of classes repesented
on the plates and badges. There are no A's, and no
Y's other than Y6b. Their O scale revision
includes these additional classes, so it is
frustrating that the HO version still does not.
I've looked around but can't find any currently in
production other than Microscale. I know the Champ
sets don't have the plates and badges I am looking
for. Are there any options besides finding an
appropriately sized "A" in another set and
combining it with the Microscale?
>>>
>>> Marty Flick
>>>
>>>
________________________________________
>>> NW-Modeling-List at nwhs.org
>>> To change your subscription go to
>>> <>http://list.nwhs.org/mailman/options/nw-modeling-list<
a=""> /> > Browse the NW-Modeling-List
archives at
>>> <>http://list.nwhs.org/pipermail/nw-modeling-list/<
a=""> /> >
________________________________________
>>> NW-Modeling-List at nwhs.org
>>> To change your subscription go to
>>> <>http://list.nwhs.org/mailman/options/nw-modeling-list<
a=""> /> > Browse the NW-Modeling-List
archives at
>>> <>http://list.nwhs.org/pipermail/nw-modeling-list/<
a=""> />
>> ________________________________________
>> NW-Modeling-List at nwhs.org
>> To change your subscription go to
>> <>http://list.nwhs.org/mailman/options/nw-modeling-list<
a=""> /> Browse the NW-Modeling-List
archives at
>> <>http://list.nwhs.org/pipermail/nw-modeling-list/<
a=""> />
<>________________________________________
>> NW-Modeling-List at nwhs.org
>> To change your subscription go to
>> http://list.nwhs.org/mailman/options/nw-modeling-list<
a=""> />
>> Browse the NW-Modeling-List archives at
>> <>http://list.nwhs.org/pipermail/nw-modeling-list/<
a=""> />
>>
>> -------------- next part --------------
>> An HTML attachment was scrubbed...
>> URL: <<>https://pairlist6.pair.net/pipermail/nw-modeling-list/attachments/20200920/f238e05e/attachment.html><
a=""> />
>>
>> ------------------------------
>>
>> Subject: Digest Footer
>>
>> ________________________________________
>> NW-Modeling-List at nwhs.org
>> To change your subscription go to
>> <>http://list.nwhs.org/mailman/options/nw-modeling-list<
a=""> />
>> Browse the NW-Mailing-List archives at
>> <>http://list.nwhs.org/pipermail/nw-modeling<
a=""> />
>>
>>
>> ------------------------------
>>
>> End of NW-Modeling-List Digest, Vol 211,
Issue 10
>>
*************************************************
> ________________________________________
> NW-Modeling-List at nwhs.org
> To change your subscription go to
> <>http://list.nwhs.org/mailman/options/nw-modeling-list<
a=""> />
> Browse the NW-Modeling-List archives at
> <>http://list.nwhs.org/pipermail/nw-modeling-list/<
a=""> />
________________________________________
NW-Modeling-List at nwhs.org
To change your subscription go to
<>http://list.nwhs.org/mailman/options/nw-modeling-list<
a=""> />
Browse the NW-Modeling-List archives at
<>http://list.nwhs.org/pipermail/nw-modeling-list/<
a=""> />
<>
________________________________________
NW-Modeling-List at nwhs.org
To change your subscription go to
http://list.nwhs.org/mailman/options/nw-modeling-list
Browse the NW-Modeling-List archives at
http://list.nwhs.org/pipermail/nw-modeling-list/
________________________________________
NW-Modeling-List at nwhs.org
To change your subscription go to
http://list.nwhs.org/mailman/options/nw-modeling-list
Browse the NW-Modeling-List archives at
http://list.nwhs.org/pipermail/nw-modeling-list/
--
Walter Davis
<walterdavis.vcf>
________________________________________
NW-Modeling-List at nwhs.org
To change your subscription go to
http://list.nwhs.org/mailman/options/nw-modeling-list
Browse the NW-Modeling-List archives at
http://list.nwhs.org/pipermail/nw-modeling-list/
________________________________________
NW-Modeling-List at nwhs.org
To change your subscription go to
http://list.nwhs.org/mailman/options/nw-modeling-list
Browse the NW-Modeling-List archives at
http://list.nwhs.org/pipermail/nw-modeling-list/
-------- Original message --------From: NW Modeling List via NW-Modeling-List <nw-modeling-list at nwhs.org> Date: 9/27/20 5:05 PM (GMT-05:00) To: nw-modeling-list at nwhs.org Cc: NW Modeling List <nw-modeling-list at nwhs.org> Subject: Re: HO scale K2 was HO Scale decals (NW Modeling List) ________________________________________NW-Modeling-List at nwhs.orgTo change your subscription go tohttp://list.nwhs.org/mailman/options/nw-modeling-listBrowse the NW-Modeling-List archives athttp://list.nwhs.org/pipermail/nw-modeling-list/
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://pairlist6.pair.net/pipermail/nw-modeling-list/attachments/20200927/a496d797/attachment-0001.html>
More information about the NW-Modeling-List
mailing list