[DesignII] Version 9.17 of DESIGN II for Windows
Lynn McGuire
lmc at winsim.com
Wed Dec 1 18:18:46 EST 2004
This email is to notify you that version 9.17 of DESIGN II for Windows
is now available on our website at www.winsim.com/download.html .
This is a upgrade release of DESIGN II for Windows. This new release
has the following changes:
1. Added the new Controller specification command "Flowrate Fraction of
Component i" to the list of stream specifications.
2. Fixed a memory allocation method in the Stream Data Box that was
overwriting the Stream data space in some flow sheets after a simulation is
completed.
3. Fixed the retention of selected KW duty units on the exchanger dialog &
feed stream liquid volumetric flow rate units.
4. Improved the mixed amine flash calculations by adjusting the starting
temperature for bubble point convergence.
5. Improved heat exchanger rating calculation convergence, especially around
the bubble and dew points of the mixture. If the heat exchanger rating fails to
converge then the program will try again to converge by internally doubling
the number of increments.
6. Modified the Distillation and Refine Column tray rating message "**
WARNING : FLOW PATH LENGTH FOR SINGLE PASS TRAY IS
LESS THAN 16 IN " to "NOTE: A FLOW PATH LENGTH < 16 IN.
NOT FEASIBLE IF INTERNAL MANWAYS REQUIRED".
7. Miscellaneous small enhancements and fixes (see release notes at
http://www.winsim.com/products/relnotes.chm )
If you are on MSS or a Program Usage Agreement, then please download
the new version. The new CDs should start going out in a couple of days.
Please note that we have a new web-based tutorial for DESIGN II for
Windows at http://www.winsim.com/tutorial/index.htm .
Please note that the Password algorithm was changed for the 9.10 release.
Your new password should have been emailed to the contact person for
your account. If you need a new password, please contact
support at winsim.com with your serial number for your new password if you
are on MSS or a Usage agreement.
You may testdrive the new release by downloading it (34 MB) from our
website and installing it. Run DESIGN II for Windows and a dialog will
come up with your Computer ID and ask you for a Serial Number and
Password. You can get a Serial Number and Password emailed to you
from www.winsim.com/gen2wkps.html on a 24 hour a day, 7 days a
week basis.
Please note that our pricing has changed effective January 2004. You can
see the new pricing at http://www.winsim.com/products/winprice.html .
We have also created www.winsim.com/buynow.html on our website for
you to conveniently view our pricing options and/or place an order for
DESIGN II for Windows. If you have any questions, please contact us
at sales at winsim.com .
Our next free half day training class will be on a yet to be determined date
at our office here in Sugar Land, Texas. There are still a couple of seats
open. Please contact admin at winsim.com for more details.
We very much appreciate the testimonials that several customers have sent
us at http://www.winsim.com/testimonials.html .
Sincerely,
Lynn McGuire
President
WinSim Inc.
P. O. Box 1885
Houston, Texas 77251
13333 Southwest Freeway, Suite 130
Sugar Land, Texas 77478
281-565-6700 Phone
281-565-7593 Fax
www.winsim.com
winsim at winsim.com
sales at winsim.com
support at winsim.com
More information about the DesignII
mailing list