[DesignII] version 9.34 of DESIGN II for Windows

[Yitzhak Nussbaum]

Dear Lynn, 

Please resend me the new password. I can't find your e-mail with this password and I need to copy it for the new 9.34 version.

Regards,
Yitzhak



 
Yitzhak Nussbaum
ORMAT SYSTEMS LTD.
Shidlovsky Rd. No.1
P.O. Box  68
Yavne    81100
ISRAEL

mailto:ynussbaum at ormat.com
  +972 89 433862
  +972 89 439901
   http://www.ormat.com



-----Original Message-----
From: designii-bounces at winsim.com [mailto:designii-bounces at winsim.com] On Behalf Of Lynn McGuire
Sent: Friday, August 25, 2006 00:27
To: designii at winsim.com
Subject: [DesignII] version 9.34 of DESIGN II for Windows

This email is to notify you that version 9.34 of DESIGN II for Windows is now 
available on our website at www.winsim.com/download.html .

This is a maintenance release of DESIGN II for Windows.  This new release 
has the following changes:
1. Added a water miscibility print to the stream and equipment results headers
2. Added a warning about the need to treat water as an immiscible component 
    when with hydrocarbon systems and there is non-soluable water 
3. Fixed several three phase flash calculations problems with mixtures of natural 
    gases, ethylene glycol and water (also mixtures of natural gas, methanol and 
    water)
4. Changed the unit module initialization code so that feed streams to a unit 
    module are automatically reflashed if the k-value method, enthalpy method or 
    the water miscibility is changed for the unit module. Previously, only the stream 
    enthalpy was recalculated if the unit module enthalpy method was changed. 
5. Improved the liquid amine specific heat calculations using industry standard 
    data. Also added heat of solution and excess volume of solution to aqueous 
    amine mixture calculations. Note, this change will cause significant changes 
    in the calculated enthalpy results for amines and aqueous amine mixtures. 
6. The Mass Balance unit module now checks itself for convergence and tells the 
    recycle sequencer when it is not converged yet so that the recycle calculations 
    will not end prematurely
7. Increased the internal limit on section height in Amine Columns to 200 feet or 
    200 trays
8. Miscellaneous small enhancements and fixes (see release notes 
    at http://www.winsim.com/media/relnotes.chm ) 

If you are on MSS or a Program Usage Agreement, then please download the 
new version.  The new CDs should start going out in a couple of days.

Please note that we have a web-based tutorial for DESIGN II for Windows 
at http://www.winsim.com/tutorial/index.htm .

Please note that the Password algorithm was changed for the 9.33 release.  
Your new password should have been emailed to the contact person for your 
account.  If you need a new password, please contact support at winsim.com 
with your serial number for your new password if you are on MSS or a Usage 
agreement.

You may testdrive the new release by downloading it (41 MB) from our website 
and installing it.  Run DESIGN II for Windows and a dialog will come up with 
your Computer ID and ask you for a Serial Number and Password.  You can get 
a Serial Number and Password emailed to you from www.winsim.com/gen2wkps.html 
on a 24 hour a day, 7 days a week basis.  

Our next free half day training class will be on Monday, October 23, 2006 at our 
office here in Sugar Land, Texas.  There are still a couple of seats open.  
Please contact admin at winsim.com for more details.

We very much appreciate the testimonials that several customers have sent 
us at http://www.winsim.com/testimonials.html .

Sincerely,
Lynn McGuire
President
WinSim Inc.
13333 Southwest Freeway, Suite 130
Sugar Land, Texas 77478
281-565-6700 Phone
281-565-7593 Fax
www.winsim.com
lmc at winsim.com
sales at winsim.com
support at winsim.com



_______________________________________________
DesignII mailing list
DesignII at winsim.com
http://six.pairlist.net/mailman/listinfo/designii
**********************************************************************************************
IMPORTANT: The contents of this email and any attachments are confidential. They are intended for the 
named recipient(s) only.
If you have received this email in error, please notify the system manager or the sender immediately and do 
not disclose the contents to anyone or make copies thereof.
*** eSafe scanned this email for viruses, vandals, and malicious content. ***
**********************************************************************************************