[DesignII] Version 11.07 of DESIGN II for Windows

[Lynn McGuire]

This email is to notify you that version 11.07 of DESIGN II
for Windows is now available on our website at
    www.winsim.com/download.html .

This is a release of DESIGN II for Windows.  This new
release has the following changes:
1. Added support for the Tank unit module to participate
    properly within recycle loops
2. Fixed the program crash issue in the Tank unit module
    when liquid height was specified
3. Updated the Refrigerant 507 coefficients for the ideal
    gas heat capacity and liquid heat capacity curves to
    match NIST and other data sources
4. Fixed a BWRS thermodynamic method initialization issue
    which came up only if the DLL was re-initialized via
    Visual Basic
5. Added the Compressor unit module specifications and
    results to the Exchange Data with Spreadsheet feature
6. Fixed the skipping of some data in depressurizer table
    in the Excel results data transfer when the valve reseat
    pressure was used
7. Fixed the issue when an equipment or stream number is
    changed to reflect that change in modules such as the
    controller or others
8. Miscellaneous small enhancements and fixes (see release
    notes  www.winsim.com/media/relnotes.chm  )

If you are on MSS or a Program Usage Agreement, then please
download the new version.

Please note that we have a web-based tutorial for DESIGN II
for Windows at	www.winsim.com/support.html .

Please note that the Password algorithm was changed for the
11.00 release.	Your new password should have been emailed
to the contact person for your account.  If you need a new
password, please contact support at winsim.com with your serial
number for your new password if you are on MSS or a Usage
agreement.

You may testdrive the new release by downloading it (80 MB)
from our website and installing it.  Run DESIGN II for
Windows and a dialog will come up with your Computer ID and
ask you for a Serial Number and Password.  You can get a
Serial Number and Password emailed to you from
    www.winsim.com/gen2wkps.html on a 24 hour a day, 7 days a
week basis.

Our next free half day training class will be on Friday,
July 6, 2012 at our new office at 8653 FM 2759, Richmond,
Texas 77469.  There are still a couple of seats open.
Please contact admin at winsim.com for more details.

We very much appreciate the testimonials that several
customers have sent us at  www.winsim.com/testimonials.html .

You can also follow us at our new Facebook page:
    www.facebook.com/winsiminc

Sincerely,
Lynn McGuire
President
8653 FM 2759 Road
Richmond, Texas 77469
281-545-9200 Phone
281-545-8820 Fax
www.winsim.com
lmc at winsim.com
sales at winsim.com
support at winsim.com