[DesignII] Version 12.02 of DESIGN II for Windows

[Lynn McGuire]

This email is to notify you that version 12.02 of DESIGN II
for Windows is now available on our website at
    www.winsim.com/download.html .

This is a release of DESIGN II for Windows.  This new
release has the following changes:
1. Added the capability to calculate unit modules in reverse
    calculation order.  The unit modules to be reverse
    calculated must only have one inlet stream unless the
    unit module is the mixer.
2. The mixer unit module has new commands to split the flow
    from the outlet stream into two or more inlet streams for
    reverse calculations
3. The compressor, pump and expander unit modules have a new
    command for specifying the inlet pressure for reverse
    calculations
4. Added two new sample flowsheet files: reverse1.psd and
    flrehdr_reverse.psd
5. Added a user option to retain or delete existing sheets
    for Excel transferred simulation results
6. Added control options to print all, current, or a range
    of sheets within a flowsheet
7. Fixed user interface stability on streams, lines and
    menus after visiting dialogs and/or zooming of flowsheet
    with colored modules
8. Miscellaneous small enhancements and fixes (see release
    notes  www.winsim.com/media/relnotes.chm  )

If you are on MSS or a Program Usage Agreement, then please
download the new version.

Please note that we have a web-based tutorial for DESIGN II
for Windows at	www.winsim.com/support.html .

Please note that the Password algorithm was changed for the
12.00 release.	Your new password should have been emailed
to the contact person for your account.  If you need a new
password, please contact support at winsim.com with your serial
number for your new password if you are on MSS or a Usage
agreement.

Please note that all of the serial numbers have been changed
to email addresses for 12.00 release. The old ABC12345 type
serial numbers will no longer be used.

You may testdrive the new release by downloading it (80 MB)
from our website and installing it.  Run DESIGN II for
Windows and a dialog will come up with your Computer ID and
ask you for a Serial Number and Password.  You can get a
Serial Number and Password emailed to you from
    www.winsim.com/gen2wkps.html
on a 24 hour a day, 7 days a week basis.

Our next free half day training class will be on Friday,
January 10, 2014 at our new office at 8653 FM 2759 Road,
Richmond, Texas 77469.	There is a new very limited hands
on session in the afternoon.  There are still a couple of
seats open.  Please contact admin at winsim.com for more details.

We very much appreciate the testimonials that several
customers have sent us at  www.winsim.com/testimonials.html .

You can also follow us at our new Facebook page:
    www.facebook.com/winsiminc

Sincerely,
Michael Lynn McGuire
President
8653 FM 2759 Road
Richmond, Texas 77469
281-545-9200 x102 Phone
281-545-8820 Fax
832-202-3918 cell
www.winsim.com
lmc at winsim.com
sales at winsim.com
support at winsim.com