[DesignII] Version 14.00 of DESIGN II for Windows
Lynn McGuire
lmc at winsim.com
Wed Nov 5 13:12:24 EST 2014
This email is to notify you that version 14.00 of DESIGN II
for Windows is now available on our website at
www.winsim.com/download.html .
This is a release of DESIGN II for Windows. This new
release has the following changes:
1. Added a new floating roof (single or double) option to the
Tank unit module with minimum and maximum liquid heights.
2. Added up to one hundred (100) product stream flowrate and
time specifications to the Tank unit module
3. Added user input time periods for dynamic simulation
instead of using a constant time interval
4. Added fittings and valve specifications for the calculation
of the equivalent length to the Line module
5. Added speedless (rpm) curve dimensional units to the
Polytropic Compressor and Pump so that efficiency and head
curves can now be input in ft3/min and feet.
6. Consolidated the stream display results dialogs into one
dialog where multiple display items and units can be selected
7. Added automatic storage of the DESIGN II output file in the
PSD file when the simulation is completed
8. Miscellaneous small enhancements and fixes (see release
notes www.winsim.com/media/relnotes.chm )
If you are on MSS or a Program Usage Agreement, then please
download the new version.
Please note that we have a web-based tutorial for DESIGN II
for Windows at www.winsim.com/support.html .
Please note that the Password algorithm was changed for the
14.00 release. Your new password should have been emailed
to the contact person for your account. If you need a new
password, please contact support at winsim.com with your serial
number for your new password if you are on MSS or a Usage
agreement.
You may testdrive the new release by downloading it (86 MB)
from our website and installing it. Run DESIGN II for
Windows and a dialog will come up with your Computer ID and
ask you for a Serial Number and Password. You can get a
Serial Number and Password emailed to you from
www.winsim.com/gen2wkps.html
on a 24 hour a day, 7 days a week basis.
Our next free half day training class will be on Friday,
Nov 7, 2014 at our new office at 8653 FM 2759 Road,
Richmond, Texas 77469. There is a new very limited hands
on session in the afternoon. There are still a couple of
seats open. Please contact admin at winsim.com for more details.
We very much appreciate the testimonials that several
customers have sent us at www.winsim.com/testimonials.html .
You can also follow us at our new Facebook page:
www.facebook.com/winsiminc
Sincerely,
Michael Lynn McGuire
President
8653 FM 2759 Road
Richmond, Texas 77469
281-545-9200 x102 Phone
281-545-8820 Fax
832-202-3918 cell
www.winsim.com
lmc at winsim.com
sales at winsim.com
support at winsim.com
More information about the DesignII
mailing list