[DesignII] Version 14.07 of DESIGN II for Windows

[Lynn McGuire]

This email is to notify you that version 14.07 of DESIGN II
for Windows is now available on our website at
    www.winsim.com/download.html .

This is a release of DESIGN II for Windows.  This new
release has the following changes:
1. Added the component properties to the bottom of the Excel
    transfer stream summary sheet
2. Fixed the overall heat transfer coefficient input units
    W/m2/K in heat exchanger
3. Fixed the Shortcut Fractionator properties dialog to allow
    a minimum reflux value
4. Improved the three phase flash calculations to predict a
    more precise phase separation at dew and water dew point
    for DEG and water systems
5. Enhanced the three phase flash calculation for wide boiling
    mixtures for better heat exchanger duty calculations
6. Fixed inerted components in Equlibrium Reactor’s output
    calculations and product streams
7. Fixed the Tank unit module calculations using ultra high
    pressures (14,000 psia / 100 bar) and a single component in
    a Tank for feeding another Tank using dynamic simulation
8. Miscellaneous small enhancements and fixes (see release
    notes at  www.winsim.com/media/relnotes.html  )

If you are on MSS or a Program Usage Agreement, then please
download the new version.

Please note that we have a web-based tutorial for DESIGN II
for Windows at  www.winsim.com/support.html .

Please note that the Password algorithm was changed for the
14.00 release.  Your new password should have been emailed
to the contact person for your account.  If you need a new
password, please contact support at winsim.com with your serial
number for your new password if you are on MSS or a Usage
agreement.

You may testdrive the new release by downloading it (90 MB)
from our website and installing it.  Run DESIGN II for
Windows and a dialog will come up with your Computer ID and
ask you for a Serial Number and Password.  You can get a
Serial Number and Password emailed to you from
    www.winsim.com/gen2wkps.html
on a 24 hour a day, 7 days a week basis.

Our next free half day training class will be on Friday,
January 8, 2016 at our new office at 8653 FM 2759 Road,
Richmond, Texas 77469.  There is a new very limited hands
on session in the afternoon.  There are still a couple of
seats open.  Please contact admin at winsim.com for more details.

We very much appreciate the testimonials that several
customers have sent us at  www.winsim.com/testimonials.html .

You can also follow us at our new Facebook page:
    www.facebook.com/winsiminc

Sincerely,
Michael Lynn McGuire
President
8653 FM 2759 Road
Richmond, Texas 77469
281-545-9200 x102 Phone
281-545-8820 Fax
832-202-3918 cell
www.winsim.com
lmc at winsim.com
sales at winsim.com
support at winsim.com