[DesignII] Version 14.04 of DESIGN II for Windows
Lynn McGuire
lmc at winsim.com
Fri May 29 23:01:48 EDT 2015
This email is to notify you that version 14.04 of DESIGN II
for Windows is now available on our website at
www.winsim.com/download.html .
This is a release of DESIGN II for Windows. This new
release has the following changes:
1. Added optional dynamic external heat (or cool) start times
and values to the Tank module calculation
2. Added percent data entry for polytropic compressor efficiency
curve
3. Fixed flowsheet display of Cp values due to unit conversion
problems
4. Fixed Excel transferred stream summary display of Surface
Tension of Liquid 2
5. Fixed flowsheet display of Celsius (C) for stream temperature
when on Chinese version of Windows Operating System
6. Fixed an occasional problem with the tail end of the recycle
sequence array and equipment calculations when the
Simultaneous Convergence method is used
7. Improved the Air Cooler flash calculation for rating cases
8. Miscellaneous small enhancements and fixes (see release
notes at www.winsim.com/media/relnotes.html )
If you are on MSS or a Program Usage Agreement, then please
download the new version.
Please note that we have a web-based tutorial for DESIGN II
for Windows at www.winsim.com/support.html .
Please note that the Password algorithm was changed for the
14.00 release. Your new password should have been emailed
to the contact person for your account. If you need a new
password, please contact support at winsim.com with your serial
number for your new password if you are on MSS or a Usage
agreement.
You may testdrive the new release by downloading it (86 MB)
from our website and installing it. Run DESIGN II for
Windows and a dialog will come up with your Computer ID and
ask you for a Serial Number and Password. You can get a
Serial Number and Password emailed to you from
www.winsim.com/gen2wkps.html
on a 24 hour a day, 7 days a week basis.
Our next free half day training class will be on Friday,
July 10, 2015 at our new office at 8653 FM 2759 Road,
Richmond, Texas 77469. There is a new very limited hands
on session in the afternoon. There are still a couple of
seats open. Please contact admin at winsim.com for more details.
We very much appreciate the testimonials that several
customers have sent us at www.winsim.com/testimonials.html .
You can also follow us at our new Facebook page:
www.facebook.com/winsiminc
Sincerely,
Michael Lynn McGuire
President
8653 FM 2759 Road
Richmond, Texas 77469
281-545-9200 x102 Phone
281-545-8820 Fax
832-202-3918 cell
www.winsim.com
lmc at winsim.com
sales at winsim.com
support at winsim.com
--
** IMPORTANT NOTE **
To unsubscribe or change your info, click here:
http://www.mailermailer.com/u/update/00000f-e6d0b9bf
To subscribe, click here: http://www.mailermailer.com/u/signup/05704c
Email Marketing by MailerMailer
More information about the DesignII
mailing list