[DesignII] Version 15.08 of DESIGN II for Windows

[Lynn McGuire]

This email is to notify you that version 15.08 of DESIGN II for Windows 
is now available on our website at
    www.winsim.com/download.html .

This is a release of DESIGN II for Windows.  This new
release has the following changes:

1. Added more error detection and handling to increase user
    interface stability
2. Added the new Calculated Duty to the Tank displayable results.
    Also added the same to the flowsheet displayable Table and Chart
    results.
3. Added move up / move down list controls on Case Study table
    and plot dialog
4. Added a validation test that the equipment or streams being
    looked at or changed by case study must be enabled (not
    disabled) in the flowsheet.
5. Reduced flowsheet file sizes significantly by looking for and
    deleting any orphaned data items (data items with no owners)
    after the data item cache is read from the flowsheet file, and
    before the data item cache is written to the flowsheet file.
6. Added more checks and balances to the three phase
    thermodynamic calculations. Several of the internal tolerances
    were tightened.
7. Fixed the Case Study's Divider specification to now allow
    varying the flowrate on the first outlet stream only
8. Miscellaneous small enhancements and fixes (see release
    notes https://www.winsim.com/media/relnotes.html )

If you are on MSS or a Program Usage Agreement, then please
download the new version.

Please note that we have a web-based tutorial for DESIGN II for Windows 
at  www.winsim.com/support.html .

Please note that the Password algorithm was changed for the 15.00 
release.  Your new password should have been emailed to the contact 
person for your account.  If you need a new password, please contact 
support at winsim.com with your serial number for your new password if you 
are on MSS or a Usage agreement.

You may testdrive the new release by downloading it (110 MB) from our 
website and installing it.  Run DESIGN II for Windows and a dialog will 
come up with your Computer ID and ask you for a Serial Number and 
Password.  You can get a Serial Number and Password emailed to you from 
   www.winsim.com/gen2wkps.html on a 24 hour a day, 7 days a week basis.
Our next free half day training class will be on Friday, September 8, 
2017 at our office at 8653 FM 2759 Road, Richmond, Texas 77469.  There 
is a very limited hands on session in the afternoon.  There are still a 
couple of seats open.  Please contact admin at winsim.com for more details.

We very much appreciate the testimonials that several customers have 
sent us at  www.winsim.com/testimonials.html .

You can also follow us at our Facebook page:
    www.facebook.com/winsiminc

Sincerely,
Michael Lynn McGuire
President
8653 FM 2759 Road
Richmond, Texas 77469
281-545-9200 x102 Phone
281-545-8820 Fax
832-202-3918 cell
www.winsim.com
lmc at winsim.com
sales at winsim.com
support at winsim.com

-- 

** IMPORTANT NOTE **

To unsubscribe or change your info, click here: 
http://www.mailermailer.com/u/update/00000f-e6d0b9bf

To subscribe, click here:  http://www.mailermailer.com/u/signup/05704c

Email Marketing by MailerMailer