[DesignII] Version 15.14 of DESIGN II for Windows
Lynn McGuire
lmc at winsim.com
Thu Jul 12 20:23:25 EDT 2018
This email is to notify you that version 15.14 of DESIGN II for Windows
is now available on our website at www.winsim.com/download.html .
The new features and fixes are:
1. Added mass fraction and mass fraction of a stream flow rate
specifications to the Component Splitter unit module specifications
2. Added transferring factors to data exchange for the Component
Splitter unit module from a spreadsheet
3. Added display of the inlet and outlet mixture velocities to the Line
unit module summary
4. Expanded the Crude Feed calculations from a maximum of 100 pure
components and crude cuts to a maximum of 1,000 pure components and
crude cuts
5. Fixed the Crude feed Property Set by component command
6. Fixed the acentric factors for extremely high boiling points above
1,500 F of petroleum fractions to be limited to a maximum value of 2.0
7. Fixed a bug in the DMPEG thermodynamics that was calculating liquid
enthalpies incorrectly
8. Miscellaneous small enhancements and fixes (see release notes
https://www.winsim.com/media/relnotes.html )
If you are on MSS or a Program Usage Agreement, then please download the
new version.
Please note that we have a web-based tutorial for DESIGN II for Windows
at www.winsim.com/support.html .
Please note that the Password algorithm was changed for the 15.00
release. Your new password should have been emailed to the contact
person for your account. If you need a new password, please contact
support at winsim.com with your serial number for your new password if you
are on MSS or a Usage agreement.
You may testdrive the new release by downloading it (120 MB) from our
website and installing it. Run DESIGN II for Windows and a dialog will
come up with your Computer ID and ask you for a Serial Number and
Password. You can get a Serial Number and Password emailed to you from
www.winsim.com/gen2wkps.html on a 24 hour a day, 7 days a week basis.
Our next free half day training class will be on Friday, August 3, 2018
at our office at 8653 FM 2759 Road, Richmond, Texas 77469. There is a
very limited hands on session in the afternoon. There are still a
couple of seats open. Please contact admin at winsim.com for more details.
We very much appreciate the testimonials that several customers have
sent us at www.winsim.com/testimonials.html .
You can also follow us at our Facebook page: www.facebook.com/winsiminc
Sincerely,
Michael Lynn McGuire
President
8653 FM 2759 Road
Richmond, Texas 77469
281-545-9200 x102 Phone
281-545-8820 Fax
832-202-3918 cell www.winsim.com
lmc at winsim.com
sales at winsim.com
support at winsim.com
More information about the DesignII
mailing list