[DesignII] Fwd: Version 15.13 of DESIGN II for Windows
Lynn McGuire
lmc at winsim.com
Fri Jun 22 19:08:09 EDT 2018
This email is to notify you that version 15.13 of DESIGN II for Windows
is now available on our website at www.winsim.com/download.html .
The new features and fixes are:
1. Added inlet and outlet mixture velocities to the Line module for the
Controller unit module access
2. Added factors such as “Molar Fraction for each Component", “Molar
Flowrate for each Component", “Mass Flowrate for each Component", “Vapor
Volumetric Flowrate for each Component", and “Liquid Volumetric Flowrate
for each Component" to data exchange from Excel to program for the
Component Splitter unit module
3. Added a repeat controller to the Stream module in the data exchange
from spreadsheet so that multiple Crude Feed properties can be input
from a spreadsheet in a custom dialog
4. Changed the Excel spreadsheet data exchange dialog so it now can set
the beginning and ending cell columns and rows simultaneously using a
selected cell range in a spreadsheet
5. Fixed stream display results for barrels per day data for an isolated
crude file
6. Fixed heat of vaporization data for Therminol VP-1, component id
#2058, to allow better heat exchanger duty estimations when it is rated
7. Expanded the Crude Feed calculations from a maximum of 100 pure
components and crude cuts to a maximum of 1,000 pure components and
crude cuts
8. Miscellaneous small enhancements and fixes (see release notes
https://www.winsim.com/media/relnotes.html )
If you are on MSS or a Program Usage Agreement, then please download the
new version.
Please note that we have a web-based tutorial for DESIGN II for Windows
at www.winsim.com/support.html .
Please note that the Password algorithm was changed for the 15.00
release. Your new password should have been emailed to the contact
person for your account. If you need a new password, please contact
support at winsim.com with your serial number for your new password if you
are on MSS or a Usage agreement.
You may testdrive the new release by downloading it (110 MB) from our
website and installing it. Run DESIGN II for Windows and a dialog will
come up with your Computer ID and ask you for a Serial Number and
Password. You can get a Serial Number and Password emailed to you from
www.winsim.com/gen2wkps.html on a 24 hour a day, 7 days a week basis.
Our next free half day training class will be on Friday, August 3, 2018
at our office at 8653 FM 2759 Road, Richmond, Texas 77469. There is a
very limited hands on session in the afternoon. There are still a
couple of seats open. Please contact admin at winsim.com for more details.
We very much appreciate the testimonials that several customers have
sent us at www.winsim.com/testimonials.html .
You can also follow us at our Facebook page: www.facebook.com/winsiminc
Sincerely,
Michael Lynn McGuire
President
8653 FM 2759 Road
Richmond, Texas 77469
281-545-9200 x102 Phone
281-545-8820 Fax
832-202-3918 cell www.winsim.com
lmc at winsim.com
sales at winsim.com
support at winsim.com
WinSim Inc.
8653 FM 2759 Road
Richmond Texas 77469
United States
More information about the DesignII
mailing list