[DesignII] Version 16.10 of DESIGN II for Windows

[Lynn McGuire]

This email is to notify you that version 16.10 of DESIGN II for Windows 
is now available on our website at www.winsim.com/download.html .

The new features and fixes are:
1. Fixed the Stream Data Box to include the component names after the 
component name maximum widths were changed in the 16.09 release
2. Put in a maximum size of 100 MB for the stored Design II output file
3. Fixed the Expander to show the correct type of calculation method, 
Entropy (isentropic) or Polytropic (volume change)
4. Fixed the bubble point temperature calculation of a pure water stream 
at 20.00 Barg which was being rejected as not being consistent with 
previous bubble point temperature calculations of the same mixture
5. Removed the excess printing of the message "GUIDELINE: Vapor release 
channels may be needed to promote vapor flow"
6. Removed the warning messages "WARNING: KETTLE SHELL TYPE IS NOT 
AVAILABLE FOR RATING. (szhxer)" and "WARNING: CALCULATIONS PERFORMED FOR 
E SHELL. (szhxer)" since kettle heat exchanger rating has been supported 
for many versions
7. Miscellaneous small enhancements and fixes (see release notes 
www.winsim.com/media/relnotes.html )

If you are on MSS or a Program Usage Agreement, then please download the 
new version.

Please note that we have a web-based tutorial for DESIGN II for Windows 
at www.winsim.com/support.html .

Please note that the Password algorithm was changed for the 16.00 
release. Your new password should have been emailed to the contact 
person for your account. If you need a new password, please contact 
support at winsim.com with your serial number for your new password if you 
are on MSS or a Usage agreement.

You may testdrive the new release by downloading it (180 MB) from our 
website and installing it. Run DESIGN II for Windows and a dialog will 
come up with your Computer ID and ask you for a Serial Number and 
Password. You can get a Serial Number and Password emailed to you from 
www.winsim.com/gen2wkps.html on a 24 hour a day, 7 days a week basis.

We very much appreciate the testimonials that several customers have 
sent us at www.winsim.com/testimonials.html .

You can also follow us at our Facebook page: www.facebook.com/winsiminc

Sincerely,
Michael Lynn McGuire
President
8653 FM 2759 Road
Richmond, Texas 77469
281-545-9200 x102 Phone
281-545-8820 Fax
832-202-3918 cell
www.winsim.com
LMC at winsim.com
sales at winsim.com
support at winsim.com


-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://pairlist6.pair.net/pipermail/designii/attachments/20210715/56b6e631/attachment.htm>