# track centers

NW Mailing List nw-mailing-list at nwhs.org
Mon Aug 18 02:22:08 EDT 2014

```Thanks Grant I am very grateful for your knowledge and help, incidentally although my British stuff is 3mm the American layout I want to do is actually the original American TT scale at 1:120 at 2.54 mm to the foot so do you know the formula for that one

Thanks and regards
Richard

From: NW Mailing List
Sent: Sunday, August 17, 2014 10:08 PM
To: NW Mailing List
Subject: Re: track centers

Sent from my iPhone

On Aug 17, 2014, at 5:06 PM, "NW Mailing List" <nw-mailing-list at nwhs.org> wrote:

Main track centers on tangent (TCt) were 13' apart, later 14' (post-war) and wider in curves. For track centers on curves (TCc) in British TT (3mm) scale, try TCc = TCt + (5000 / R), where R is the inside track radius (all terms in millimeters).

Grant Carpenter
---
On 8/16/2014 9:32 AM, NW Mailing List wrote:

Bit more help please chaps if anybody can oblige. What is the minimum distance between tack centers on mainline double track

Thanks and regards
Richard

From: NW Mailing List
Sent: Thursday, July 31, 2014 6:57 PM
To: nw-mailing-list at nwhs.org
Subject: Re: Tie spacing

The standard tie spacing on centers was 19-1/2" for main, heavy branch, switching, and engine running tracks; 21-1/2" for light branch, switching, and engine running tracks, and heavy passing sidings and yard tracks; 23-3/4" for light passing sidings and yard tracks, and heavy industrial, shop, and storage tracks; 26-3/4" for light industrial, shop, and storage tracks; and 30-1/2" for station sidings, unimportant spurs, etc. (L-168, 1946)

Standard ties measured 9"W x 7"H x 8-1/2'L (L apparently minimum, not nominal).

Switch ties measured 9"W x 7"H and were cut in 6" intervals from 9' to 16'L . Headblock ties varied from about 11-1/2' to 14-1/2'L, depending on the machine.

Bridge ties measured 10" x 10" x 10'L (or longer where needed) on 15" centers. (L-50, 1943)

Grant Carpenter
---
On 7/27/2014 1:57 PM, NW Mailing List wrote:

Hi folks
Can somebody tell me the standard tie spacing on N&W  130lb rail please together with actual size of N&W rail ties. I am trying to do a small TT scale project with handlaid track and need sizes to get it right. I have ordered some drawings from the archives but I am too impatient to wait for them to arrive in the UK

Thanks and regards
Richard

________________________________________
NW-Mailing-List at nwhs.org
To change your subscription go to
http://list.nwhs.org/mailman/options/nw-mailing-list
Browse the NW-Mailing-List archives at
http://list.nwhs.org/pipermail/nw-mailing-list/

--------------------------------------------------------------------------------
________________________________________
NW-Mailing-List at nwhs.org
To change your subscription go to
http://list.nwhs.org/mailman/options/nw-mailing-list
Browse the NW-Mailing-List archives at
http://list.nwhs.org/pipermail/nw-mailing-list/
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://six.pairlist.net/pipermail/nw-mailing-list/attachments/20140818/03fd88fb/attachment.html>
```