Concrete Water Tank

NW Mailing List nw-mailing-list at nwhs.org
Tue Feb 10 21:53:48 EST 2015


The weight of water is incidental to the weight of the structure.  While water is 8.33 pounds per gallon, concrete is about 150 pounds per cubic foot or about two tons per cubic yard.  I don’t know the number of cubic yards of concrete in a water tank, but it is many.  The weight of the structure is huge and the weight of water in relation is incidental.  A water tank that has one-foot thick walls, sixty feet tall and about 30 feet across has many cubic yards of concrete.  The footers and foundation has to support a huge weight.

Bud Jeffries

From: NW Mailing List 
Sent: Sunday, February 08, 2015 9:07 PM
To: NW Mailing List 
Subject: Re: Concrete Water Tank

Chief Engineer's drawing L-230, "Norfolk & Western Railroad [sic] Standard 200,000 and 250,000 Gallon Reinforced Concrete Water Tank," 6/17/19 (NWHS No. HS-D00252) that I mentioned in a previous posting shows a 9' - 6" wide circular footing with the bottom of the footing 6' - 6" below base of rail.  A "Detail of Footing where Piles Are Used" on the same drawing shows a 5' - 6" wide circular footing bearing on 50 piles (size not specified), with the bottom of the footer likewise 6' - 6" below base of rail.  A note under the latter detail reads, "If larger foundation is required than shown on drawing, size to be satisfactory to the Engineer of the N. and W. Railroad [sic]."

Gordon Hamilton
  ----- Original Message ----- 
  From: NW Mailing List 
  To: N&W Mailing List 
  Sent: Saturday, February 07, 2015 8:25 AM
  Subject: Re: Concrete Water Tank

  This discussion can be carried to another level.

  A 200,000 gal water tank holds about 800 tons of water (200,000  gals X 8 lb gal = 800 tons.)  Spread that weight out over a dozen footers, and each footer must support (only) 66 tons of water + some additional load for the structure.

  That is not a lot of weight for a footer to carry, but I am wondering how footings were handled in places like the Dismal Swamp?  How deeply were they carried down, and how does one excavate to bed rock in a swamp...?

  A 200,000 gal tank could fill twenty very old 10,000 gal tenders, ten modern 20,000 gal tenders, or 6.6  30,000 gal whopper tenders.  This makes me wonder about the re-fill rate.  Anyone know the hourly capacity of the steam, distillate engine and electric motor pumps which were, over the years, used to re-fill the N&W tanks?

  Some railroads had a Superintendent of Water Service.  Who, on the N&W, wore the King-Waterboy hat?  And did this function (water supply) fall under the Motive Power or the MW Department?

  -- abram burnett

  ===========================
  Sent to You from my Telegraph Key
      ... better than AT&T 4G LTE 
  ===========================



------------------------------------------------------------------------------
  ________________________________________
  NW-Mailing-List at nwhs.org
  To change your subscription go to
  http://list.nwhs.org/mailman/options/nw-mailing-list
  Browse the NW-Mailing-List archives at
  http://list.nwhs.org/pipermail/nw-mailing-list/ 


------------------------------------------------------------------------------

  No virus found in this message.
  Checked by AVG - www.avg.com
  Version: 2014.0.4800 / Virus Database: 4257/9080 - Release Date: 02/08/15



--------------------------------------------------------------------------------
________________________________________
NW-Mailing-List at nwhs.org
To change your subscription go to
http://list.nwhs.org/mailman/options/nw-mailing-list
Browse the NW-Mailing-List archives at
http://list.nwhs.org/pipermail/nw-mailing-list/
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://pairlist6.pair.net/pipermail/nw-mailing-list/attachments/20150210/ec1a3764/attachment.html>


More information about the NW-Mailing-List mailing list