PL-2 Identification

NW Mailing List nw-mailing-list at nwhs.org
Fri Aug 28 14:49:21 EDT 2015


Wow, good stuff there! Thanks for sharing!

Eric

> On Aug 28, 2015, at 14:32, NW Mailing List <nw-mailing-list at nwhs.org> wrote:
> 
> From my interviews with older supervisors from the PRR Signal Department, the PRR did NOT use the PL-2.
> 
> And from the evidence which existed until recently, the N&W did NOT use the PL-3, at least until some VERY late replacements (e.g. Singer.)  They probably bought the PL-3 equipment only because the PL-2 was no longer in production at US&S.  I have heard the Pocahontas Div also had some PL-3 equipment.
> 
> As far as I can determine, the N&W was the only road which bought the PL-2.  That makes me wonder if it was developed specifically for the N&W.  The optics of the PL-2 have twice the horizontal light beam "spread" (18 degrees)  of the PL-1 and PL-3, which would have suited the N&W's somewhat curvy alignment quite nicely.  Most of the N&W's PL-1 equipment was changed out with PL-2 as it rusted out or otherwise failed.  The last PL-1s I saw in service on the N&W were at Randolph Street, Roanoke, in the early 1990s.
> 
> Attached is a photograph of the three iterations of PL equipment.  The PL-1 is on the bottom; the PL-2 is in the middle; the PL-3 is at the top.  Each has its own unique optical system.  
> 
> The optical system of the PL-1 consisted of a clear plano-convex lens with stepping (concentric rings) and a cast prism in the middle, utilized the conical cover glass tinted in a color called No-Viol Yellow, and had a mirror above the lamp, set at 45 degrees, to give the downward indication.  The PL-1 went into production in either 1922 or 1923.
> 
> In the optical system of the PL-2, the plano-convex lens was dispensed with, the deflecting prisms were cast into the back surface of the lens (which was cast in No-Viol glass,) and the mirror was directly behind the lamp (with the possibility of phantom indications being eliminated by the insertion of a honeycomb "phan-kill" directly behind the lens.)  Also note that the conical cover glass was eliminated on the PL-2.  The prisms cast onto the lens provided for a 20 degree downward deflection, which could be enhanced by the insertion behind the lens of an additional 15 degree "cat's eye" prism of 2.25" diameter, retained in place by a phosphor-bronze retaining clip.   (In the attached photo, the "cat's eye" downward prism is visible in the upper part of the  illuminated area.)  The earliest drawings I have for the PL-3 are dated 1937.
> 
> The optical system of the PL-3 utilized a clear, flat  5 3/8ths inch lens set at a 15 degree angle within the housing itself, and the downward deflecting prisms were cast into this lens.  Again, the mirror was directly behind the lamp, the "phan-kill" honeycomb was used, and a conical cover-glass was used on the front.  The earliest drawings I have for the PL-3 are dated 1941.
> 
> The PL-1 and PL-2 equipment both use 11.5" visors.  The PL-3 equipment utilizes a 14" visor.  The PL-1 has a single wing bolt through the side plates; the PL-2 and PL-3 use two wing bolts.  The main body castings of all three versions differ significantly.  
> 
> As for lamp bases, the PL-1 had its lamp receptacle bolted to the bottom of the cast iron housing;  the PL-2 and PL-3 equipment employed a lamp receptacle mounted horizontally at the center of the lens, carried on a small stainless steel bracket brought up from the bottom of the housing, in an inverted V-shape.  Both arrangements provided for the lamp filament to be within 1/64" of the optically precise focal point behind the lens.  (The 1/64" criterion is the meaning of the term "signal precision.")
> 
> The function of the conical cover glass was shed snow.  Its tip was frosted to eliminate the "hot spot" when the signal was viewed at night.  No-Viol (i.e. "no violet") glass was developed as the result of the work of Dr. Churchill, Corning Glass' head optical engineer, based on his earlier attempts to improve the fog-penetrating qualities of the lights on European light houses.  Churchill found that if the violet is removed from a beam of light, the beam does not scatter so badly in fog.  No-Viol glass does not transmit violet.  The Father of the PL Signal, Alexander Holley Rudd, Chief Signal Engineer of the PRR, specified that No-Viol glass be used on his PL signals.  The conical cover glasses and the frosted tips were also Mr. Rudd's idea.  (The five articles detailing the development of the PL signal between 1914 and 1922 are a fascinating read; I have placed PDF copies with the N&W Archives.)
> 
> What I have been searching for (unsuccessfully, so far) is a precise date for the introduction of the PL-2 and PL-3 lines of equipment. The surviving Union Switch & Signal records do not give dates for first and last production runs of the PL-1, PL-2 and PL-3 equipment.   Due to the 70 year copyright law in the United States, Google has not yet released the digitizations of volumes of Signal Engineer magazine from the 1930s and 1940s, which magazines contain the information I need to solve the dating problem.   If anyone has a brother-in-law at Google, please help me out...
> 
> -- abram burnett,
>     turnip farmer
> 
> ===========================
> Sent to You from my Telegraph Key
>     ... better than AT&T 4G LTE 
> ===========================
> 
> 
> Moderator:
>  http://nwhs.org/mailinglist/2015/20150828.PL-3_PL-2_PL-1_Restored_4X6_2012_04_23-FB.jpg
> 
> 
> ________________________________________
> NW-Mailing-List at nwhs.org
> To change your subscription go to
> http://list.nwhs.org/mailman/options/nw-mailing-list
> Browse the NW-Mailing-List archives at
> http://list.nwhs.org/pipermail/nw-mailing-list/
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://pairlist6.pair.net/pipermail/nw-mailing-list/attachments/20150828/130a95ee/attachment.html>


More information about the NW-Mailing-List mailing list