WAS: THE ARROW and TAF now valve setting

[NW Mailing List]

Not really sure what you mean by “top dead center” since I always thought there was a front and back dead centers (unless you have a vertical steam engine).  If you really need to get tight about it, you’ll find that the front and back dead centers are not 180 degrees apart unless the center line of the piston rod coincides with the center line of the driving wheels, a situation rarely seen.

EdKing

From: NW Mailing List 
Sent: Friday, January 26, 2018 4:48 PM
To: NW Mailing List 
Subject: WAS: THE ARROW and TAF now valve setting

Ron, et al

Cannot answer your very specific question about N&W shop practice.  It is unlikely that it was a job entrusted to a single individual. 

However, last year as my wife prowled the vendor stands at the Cabin Fever Model Engineering Expo, she found a small 104 page book entitled "Locomotive Valve Setting" by Frank Williams, Mechanical Designer for Canadian National Railways.  It is volume 505C of a series published by the International Text Book Company of Scranton, PA.   As I own several live steam locomotives in scales including 1:32, 1:20.3, 1 in/ft, and 1.5 in/ft; she felt this was an essential addition to my library.  

It has more than I really need to set the timing on my relatively small locomotives, but I gained much insight into various valve gears and how they actually work.  Of course, "Da' Boss" did not know I already had three other books on the subject.  It is worthwhile have more than one book on a subject like this as some explanations are more clear than others. 

I will freely admit that I rotate my drivers to achieve "top dead center" and other positions to set the valve events.   Even with marks on the ports and valves, I am not sure how I would accurately set everything on both sides without moving the valve motion. 

I am sure some "old head" has the real answer as to if it can be done.  

Sent from my digital telegraph key 
Jim Stapleton

On Jan 26, 2018, at 14:38, NW Mailing List via NW-Mailing-List <nw-mailing-list at nwhs.org> wrote:


  Yeah Larry, probably "job security" too , Ron H



  On Friday, January 26, 2018 10:25 AM, NW Mailing List <nw-mailing-list at nwhs.org> wrote:




  Ron
         There’s a great mystic about valve setters, I have talked to old timers about this. I think in the trades and crafts knowledge was power.
  Not down playing it in anyway but it was just good mechanical and machinist skills. Google Books have the books already mentioned .and a haft a dozen
  others on valve setting more than you will ever want to know on the subject.

  Larry Evans
  Kenova ,WV

  From: NW-Mailing-List [mailto:nw-mailing-list-bounces at nwhs.org] On Behalf Of NW Mailing List
  Sent: Wednesday, January 24, 2018 12:03 PM
  To: NW Mailing List <nw-mailing-list at nwhs.org>
  Subject: Re: THE ARROW and TAF

  Ron

  Your question may well be one that no one is positive on an answer to is why you have not gotten a response.

  Your question:

  When steam locomotives had a complete overhaul, and was re assembled, did only one trained mechanic set the valve assembly without moving or rotating the wheels, and how did he do it ?

  Those questions are for the folks who have restored steam today and how it is handled. My guess for steam era valve setting was handled with several folks, one lead person and some helpers. It is a science.

  I remember "Pappy" Houseman with the 611 restoration in 1982, he knew all the details from all those years ago.

  Best
  Ken Miller
   




--------------------------------------------------------------------------------
________________________________________
NW-Mailing-List at nwhs.org
To change your subscription go to
http://list.nwhs.org/mailman/options/nw-mailing-list
Browse the NW-Mailing-List archives at
http://list.nwhs.org/pipermail/nw-mailing-list/
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://pairlist6.pair.net/pipermail/nw-mailing-list/attachments/20180126/15cfb661/attachment.html>