over fire jets. WAS External reducing valves

NW Mailing List nw-mailing-list at nwhs.org
Wed Feb 13 15:58:43 EST 2019


I don’t know; maybe someone (like Ed King and Gordon Hamilton) on this list has experience being around them.

Bud Jeffries

From: NW Mailing List 
Sent: Wednesday, February 13, 2019 2:13 PM
To: NW Mailing List 
Subject: Re: over fire jets. WAS External reducing valves

I believe the canisters on the outside are mufflers to reduce the extremely loud sound of the air being pulled into the firebox. 


Jim Stapleton 
Northernmost VA

On Feb 13, 2019, at 11:41, NW Mailing List <nw-mailing-list at nwhs.org> wrote:


  John, don’t know, but I doubt it.  What if a little dust was injected into the firebox, it was just sucked up the stack along with cinders and all.  Bud

  From: NW Mailing List 
  Sent: Tuesday, February 12, 2019 8:25 PM
  To: nw-mailing-list at nwhs.org 
  Subject: RE: External reducing valves

  Thanks Bud. Most helpful. Do you happen to know if the ‘cans’ hanging below each nozzle on the side of the firebox (S1a for example) were air intake filters?   John Garner

   

  From: NW Mailing List [mailto:nw-mailing-list at nwhs.org] 
  Sent: Tuesday, February 12, 2019 6:51 PM
  To: NW Mailing List <nw-mailing-list at nwhs.org>
  Subject: Re: External reducing valves

   

  John,

   

  The jets were controlled from the cab.  The position of the jets were along the firebox side and were staggered so that a jet on one side was not exactly opposite the other side.  I don’t know about being adjustable, but they did use a steam nozzle that drew air in through an orifice using the venturi (spelling?) effect.  N&W only used overfire air jets on yard engines and if the exhaust and draft was heavy the jets would be off, and if the engine was halted or working with the light exhaust and draft, the engineer could turn the jets to get more complete combustion.

   

  Hope this helps,

   

  Bud Jeffries

   

  From: NW Mailing List 

  Sent: Tuesday, February 12, 2019 12:19 PM

  To: nw-mailing-list at nwhs.org 

  Subject: RE: External reducing valves

   

  Bud,  Can you briefly explain the operation of these jets? Were they automatic or controlled by crew? Was air flow adjustable or just on/off? Was steam used as the power source to achieve the necessary air flow?     Thanks,   John Garner

   

  From: NW Mailing List [mailto:nw-mailing-list at nwhs.org] 
  Sent: Tuesday, February 12, 2019 10:29 AM
  To: NW Mailing List <nw-mailing-list at nwhs.org>
  Subject: Re: External reducing valves

   

  N&W tested the use of overfire air jets for road service in 1944 with 2151.  With heavy exhaust creating very good draft in road service, the railway found that the jets gave no appreciable benefit.  Overfire air jets did find favor for use on locomotives in yard service where draft was much more sporadic and often not heavy.

   

  Bud Jeffries

   

  From: NW Mailing List 

  Sent: Monday, February 11, 2019 4:54 PM

  To: NW Mailing List 

  Subject: Re: External reducing valves

   

  Speed didn’t have anything to do with the use of overfire air jets.  Rio Grande had some big Baldwin 4-6-6-4s with overfire jets.

   

  Their function was to kill smoke by introducing air over the fire to more thoroughly burn the fuel.  The first tests of them on the N&W were on a Z-1a (1352) and a W-2 0-8-0 (if I recall correctly the 680).  The tests were done at Bluefield Yard; the catenary was in full view.  There are at least two N&W photographs of the test.  I don’t know the date, but it was before the electrification was done away with.

   

  Ed King

   

  From: NW Mailing List via NW-Mailing-List 

  Sent: Monday, February 11, 2019 3:02 PM

  To: NW Mailing List 

  Cc: NW Mailing List 

  Subject: Re: External reducing valves

   

  While on N&W steam : Most all the 0-8-0 switchers had over the fire air jets-- I'm guessing to aid in keeping a hot fire because of their slow mundane work vs the faster road locos had speed to help in firing. Is that the only reason for the jets ?  Ron Hash





--------------------------------------------------------------------------------
________________________________________
NW-Mailing-List at nwhs.org
To change your subscription go to
http://list.nwhs.org/mailman/options/nw-mailing-list
Browse the NW-Mailing-List archives at
http://list.nwhs.org/pipermail/nw-mailing-list/
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://pairlist6.pair.net/pipermail/nw-mailing-list/attachments/20190213/d157f6e1/attachment.html>


More information about the NW-Mailing-List mailing list