Research

[NW Modeling List]

Hi Jon; 



Before you do all of the historical research, I suggest that you do a quick economic analysis. 



For a 1/32 scale J or similar size locomotive model, you are looking at approximately $500,000 (½ million) in tooling, if done in China or similar economy, figure 50% more in the USA.  This is for injection molded plastic and/or die-cast parts.  Above an beyond the tooling cost, you have between $100- and $200- in material (includes equipment time).  Not included in the above is the product design time - figure $100/hr and a thousand hours if your are starting from scratch.  And then there is detailed research - photographs, drawings, etc. 



Do the math - is the "large group" big enough to support a reasonable quantity of models to pay for the design and tooling? 



I am a product design engineer, with experience tooling products in the USA and off shore. 



For comparison, an simple HO diesel runs around $100K in tooling, the highly detailed ones like Atlas's F-M TM are at least 50% higher.  Atlas and similar are probably running around 1000 hours research and design time for a highly detailed diesel model, it is that short of time because they re-use many things from previous models. 



Nigel F Misso, PE. 
----- Original Message ----- 
From: "NW Modeling List" <nw-modeling-list at nwhs.org> 
To: "NW Modeling List" <nw-modeling-list at nwhs.org> 
Sent: Friday, February 6, 2009 7:24:49 AM GMT -08:00 US/Canada Pacific 
Subject: RE: Research 




Stephen 

                Thank you for your input. This is why I stated I am doing research into what it will take to make this project come to fruition. If we find it will not be at those prices then we will make the necessary changes if the project moves forward after research is completed. If it doesn’t work out then I will scratch build the locomotives myself for my layout. No one makes a ¼ scale J #611 static display out of wood either but it is in progress in my workshop. 



I am primarily an HO modeler that has a very good friend (investor) willing to help research the possibility of manufacturing some large scale models of popular east coast steam locomotives. We have a large group of fellow modelers here in VA supporting our iniative. We know that it is likely it may not come to fruition but we are willing to try because MTH, Bachmann, USA Trains, Aristocraft and so forth currently  have none to offer. Aristocraft I know has a 2-8-8-2 which from what I have heard and read about sounds like a great locomotive. Just trying to see if there is any interest outside of our group. 




Jon Kelley 

norfolknwestern1218 at comcast.net 





From: nw-modeling-list-bounces at nwhs.org [mailto:nw-modeling-list-bounces at nwhs.org] On Behalf Of NW Modeling List 
Sent: Thursday, February 05, 2009 1:38 PM 
To: nw-modeling-list at nwhs.org 
Subject: RE: Research 



 At these suggested prices the models cannot be of any good quality. The "Scale" scale is 1/32. 

 MTH makes a good scale 1/32 product, if your source can follow these premises then you may have something, but they will not 
 be at the prices you quoted far from it! The HO market is reaching those prices, how in the world does he think a G scale product 
 would be when they a double their size. I so not think your investor is living in reality. I wish him well, but this will not happen. 

 Stephen Rineair 


Stephen, 
What experience do you have in actually designing, manufacturing, importing and distributing a product that leads you to say this?  Also, are you the propietor of Track 2 Hobbies?   
Robb Fisher 
RFDI  

Internal Virus Database is out of date. 
Checked by AVG - http://www.avg.com 
Version: 8.0.176 / Virus Database: 270.10.16/1930 - Release Date: 2/2/2009 7:51 AM 
________________________________________ NW-Modeling-List at nwhs.org To change your subscription go to http://list.nwhs.org/mailman/options/nw-modeling-list Browse the NW-Modeling-List archives at http://list.nwhs.org/pipermail/nw-modeling-list/
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://six.pairlist.net/pipermail/nw-modeling-list/attachments/20090206/4431ff5e/attachment.htm>