Brass painting advice wanted

[NW Modeling List]

Greg, if you want to give me your email address I can send you as many 
pics as you need.

Doug Langlitz


-----Original Message-----
From: NW Modeling List <nw-modeling-list at nwhs.org>
To: nw-modeling-list <nw-modeling-list at nwhs.org>
Sent: Sat, Mar 12, 2011 7:33 pm
Subject: Re: Brass painting advice wanted

Doug,
Photos of your spray booth would be great. I was thinking of cobbling 
one together out of some scrap luan plywood I have, and using a bathroom 
or kitchen exhaust fan to vent the fumes out the garage door.
Greg Harrod
=================================
In a message dated 3/10/2011 6:53:24 A.M. Eastern Standard Time, 
nw-modeling-list at nwhs.org <mailto:nw-modeling-list at nwhs.org> writes:

    Good ventilation is a must, as is a respirator and gloves. Nitrile
    gloves for solvent base paints. And while we're spending your money
    another tool that comes in very handy is a spray booth. The
    commercially available ones are pretty pricey, but you can build
    your own fairly inexpensively. I've built a few for less then $100
    with a good quality fan. I could email some photos of mine if you
    would like to see how it was built.
    Good luck
    Doug Langlitz

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://six.pairlist.net/pipermail/nw-modeling-list/attachments/20110315/746b3654/attachment.html>