Bored with steam

[NW Modeling List]

Brent: A DP Jawn Henry just went for over $4000.00. Secondary market is
great if you have a good piece.

Most Secondary market models are incorrect, bad motors, broken gears,
missing parts, poor pullers/runners, lacking good detail.

So your cheap brass model becomes an expensive model after repairs and
updating. Which the average modeler cannot afford.

Stephen Rineair

 

From: NW-Modeling-List <nw-modeling-list-bounces at nwhs.org> On Behalf Of NW
Modeling List
Sent: Friday, February 22, 2019 2:54 PM
To: NW Modeling List <nw-modeling-list at nwhs.org>
Subject: Re: Bored with steam

 

You have a W6?  I'll give you $2,000 for it.

Although I'm sure you meant that you have a W2.  But if it's really a W6 my
offer is genuine 

Brent 

________________________________
Dr. J. Brent Greer

  _____  

From: NW-Modeling-List <nw-modeling-list-bounces at nwhs.org
<mailto:nw-modeling-list-bounces at nwhs.org> > on behalf of NW Modeling List
via NW-Modeling-List <nw-modeling-list at nwhs.org
<mailto:nw-modeling-list at nwhs.org> >
Sent: Friday, February 22, 2019 1:14:57 PM
To: NW Modeling List
Cc: NW Modeling List
Subject: Re: Bored with steam 

 

I have 2 of the sunset 1st run M class.  They run great.  

I also have a Z1, and a W6 from NWSL.  

I built a K2a from a Bowser USRA mountain. 

I made some Sudo-G1's from MDC  Old timers.

Bought ONE CF caboose and 8 Gloorcraft ones that I matched to the Brass one.

 

 

-- 

Mark Lindsey

Stuck in the 1930's

From: NW-Modeling-List <nw-modeling-list-bounces at nwhs.org
<mailto:nw-modeling-list-bounces at nwhs.org> > on behalf of NW Modeling List
<nw-modeling-list at nwhs.org <mailto:nw-modeling-list at nwhs.org> >
Reply-To: NW Modeling List <nw-modeling-list at nwhs.org
<mailto:nw-modeling-list at nwhs.org> >
Date: Friday, February 22, 2019 at 11:43 AM
To: NW Modeling List <nw-modeling-list at nwhs.org
<mailto:nw-modeling-list at nwhs.org> >
Subject: Re: Bored with steam

 

On 2/22/2019 9:56 AM, NW Modeling List via NW-Modeling-List wrote:

Unfortunately, the "Big Manufacturers" haven't done the M class.  It would
be a GREAT loco as it could be modeled as built, or later with a larger
tender, and different pilots, and finally in Strasburg paint.  The BEST PART
is that those can be run on smaller layouts.  Sometimes the manufacturers
are just missing the point.

    A few years ago was a good year to be in O scale! Scott Mann came
through on his father's promise to do the M class. Big tender, little tender
and Strasburg.





Jimmy Lisle

 

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://pairlist6.pair.net/pipermail/nw-modeling-list/attachments/20190222/ef72a47e/attachment-0001.html>
-------------- next part --------------
A non-text attachment was scrubbed...
Name: image004.jpg
Type: image/jpeg
Size: 41046 bytes
Desc: not available
URL: <https://pairlist6.pair.net/pipermail/nw-modeling-list/attachments/20190222/ef72a47e/attachment-0003.jpg>
-------------- next part --------------
A non-text attachment was scrubbed...
Name: image006.jpg
Type: image/jpeg
Size: 69618 bytes
Desc: not available
URL: <https://pairlist6.pair.net/pipermail/nw-modeling-list/attachments/20190222/ef72a47e/attachment-0004.jpg>
-------------- next part --------------
A non-text attachment was scrubbed...
Name: image008.jpg
Type: image/jpeg
Size: 58483 bytes
Desc: not available
URL: <https://pairlist6.pair.net/pipermail/nw-modeling-list/attachments/20190222/ef72a47e/attachment-0005.jpg>