Genesis Redbird (NW Modeling List)

NW Modeling List nw-modeling-list at nwhs.org
Tue Nov 26 15:44:18 EST 2019


Personally, I think that if Proto and especially BLI failed to tool
their respective Y's so as to offer other classes, it shows an amazing
lack of foresight. Same goes with BLI and their A, which should have
been tooled so as to offer the earlier versions. Every model company
considering a project should always ask themselves, "What else can we
do with this tooling and how do we design it to allow us to do so?"

	Marty Flick

	-----------------------------------------From: "NW Modeling List via
NW-Modeling-List" 
To: "NW Modeling List"
Cc: "NW Modeling List"
Sent: Monday November 25 2019 7:36:56PM
Subject: RE: Genesis Redbird (NW Modeling List)

	I keep wishing someone would do a Y6a, especially with 2156 being in
Roanoke. 

	Phil Miller

	FROM: NW-Modeling-List [mailto:nw-modeling-list-bounces at nwhs.org] ON
BEHALF OF NW Modeling List
SENT: Sunday, November 24, 2019 10:42 AM
TO: NW Modeling List
SUBJECT: Re: Genesis Redbird (NW Modeling List)

	I've just recently gotten into the hobby and am concentrating on the
N&W in SW West Virginia in the 40's and 50's. I just happen to live
not far from the office (and showroom for what there is) of Factory
Direct Trains. I was down there this past week to pick up my Class J
(#613) and was talking to the owner Joe about the Y6b. He's a BLI
dealer and believes that the Y6b will come back around before long
since BLI owns the molds for that model. I hope he's right!

	Tom Fulton

	Asheville, NC

	On Sun, Nov 24, 2019 at 9:31 AM NW Modeling List  wrote:

	When Athearn produced the Redbirds they did the later phase with the
48" fans one on each end and one for dynamic frids. Rd nos were 514
and 521.

	At the same time they also produced two bluebird passenger GP9s 502
and 508. 502 had the 36" fans two on each end and I believe a 48" fan
for dynamic grids.

	I hope Athearn does indeed do a 2nd run of these as I missed the
first run. I haven't modeled in over 15 years and am just now getting
back into it, just to find I missed most of the models I would like by
a year or few (Atheran Redbirds, BLI Y6b, etc...). If all else fails I
may end up painting my own Redbirds. I just need to get the fuel tank
details and roof detail stuff... But that's another story...

	73,

	Nathan Simmons

	On Sat, Nov 23, 2019, 23:34  wrote:

	Send NW-Modeling-List mailing list submissions to
 nw-modeling-list at nwhs.org [3]

To subscribe or unsubscribe via the World Wide Web, visit
  [4]https://pairlist6.pair.net/mailman/listinfo/nw-modeling-list [5]
or, via email, send a message with subject or body 'help' to
 nw-modeling-list-request at nwhs.org [6]

You can reach the person managing the list at
 nw-modeling-list-owner at nwhs.org [7]

When replying, please edit your Subject line so it is more specific
than "Re: Contents of NW-Modeling-List digest..."

Today's Topics:

 1. Re: Genesis Redbird (NW Modeling List)
 2. Re: Genesis Redbird (NW Modeling List)

----------------------------------------------------------------------

Message: 1
Date: Sat, 23 Nov 2019 08:00:10 -0500
From: NW Modeling List 
To: NW Modeling List 
Subject: Re: Genesis Redbird
Message-ID: 
Content-Type: text/plain; charset="utf-8"; Format="flowed"

I know that in most cases pre-order does not mean pre-pay.? It depends

upon where you pre-order.

Walter Davis, Youngsville NC

On 11/20/2019 9:43 PM, NW Modeling List wrote:
> I totally agree with you. I pre ordered two or the athearn redbirds.
I 
> so believe that every manufacture has the ability to produce a bad 
> model. That is what we live with today. No more brick and mortar
hobby 
> shops where er can see the finished model. This is the internet? 
> world, either good or bad.
> .
>
> On Mon, Nov 18, 2019, 3:36 PM NW Modeling List 
>  wrote:
>
> I agree with Ed. I know that there are some people who do not like
> to preorder, but if you do not you could lose out.
>
> I do not feel sorrow for those that do not preorder and miss out
> on a model. You snooze you lose. Why would a manufacture
>
> Rerun a model because of the few that wanted one that missed out.
> The other phase Red bird yes. But will we have the some ones
> crying because they did not preorder ? most likely!!! I have no
> sympathy for those who don?t.
>
> Stephen Rineair
>
> Sent from Mail < [13]https://go.microsoft.com/fwlink/?LinkId=550986
[14]>
> for Windows 10
>
> *From: *NW Modeling List via NW-Modeling-List
> 
> *Sent: *Sunday, November 17, 2019 10:17 AM
> *To: *'NW Modeling List' 
> *Cc: *NW Modeling List 
> *Subject: *RE: Genesis Redbird
>
> I concur. Maybe a run of red and blue in both phases ? especially
> red, since they only did the phase III(?) the last time.
>
> Phil Miller
>
> *From:*NW-Modeling-List [mailto:nw-modeling-list-bounces at nwhs.org
[18]
> ] *On Behalf Of *NW
> Modeling List
> *Sent:* Saturday, November 16, 2019 2:39 PM
> *To:* 'NW Modeling List'
> *Subject:* RE: Genesis Redbird
>
> Yes, the redbirds sold out very quickly and have been almost
> impossible to find since. Hopefully this inspires Genesis to do
> another run.? I can't remember which, but they did one of two
> phases, so they can do another run with the other phase.
>
> Marty Flick
>
> -----------------------------------------
>
> From: "NW Modeling List"
> To: nw-modeling-list at nwhs.org [20] 
> Cc:
> Sent: Saturday November 16 2019 11:26:57AM
> Subject: Genesis Redbird
>
> I was fortunate to find a dealer a couple years ago taking
> reservations for the Genesis GP9s in red and blue.? I ordered 1 of
> the redbirds with full dcc/sound.? Out of curiosity, I?ve
> occasionally looked on ebay for either engine to check
> availability (I?m not in the market for another nor plan to sell
> mine).? I?ve only seen 2 or 3 auctions for the blue scheme but
> none for the red.? Are these as ?rare? as lack of auctions
indicates?
>
> Jim King
>
>  [22]http://smokymountainmodelworks.com/ [23]
>
> ________________________________________
> NW-Modeling-List at nwhs.org [24] 
> To change your subscription go to
>  [26]http://list.nwhs.org/mailman/options/nw-modeling-list [27]
> Browse the NW-Modeling-List archives at
>  [28]http://list.nwhs.org/pipermail/nw-modeling-list/ [29]
>
>
> ________________________________________
> NW-Modeling-List at nwhs.org [30]
> To change your subscription go to
>  [31]http://list.nwhs.org/mailman/options/nw-modeling-list [32]
> Browse the NW-Modeling-List archives at
>  [33]http://list.nwhs.org/pipermail/nw-modeling-list/ [34]
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <
[35]https://pairlist6.pair.net/pipermail/nw-modeling-list/attachments/20191123/a3b1230b/attachment-0001.html
[36]>
-------------- next part --------------
A non-text attachment was scrubbed...
Name: walterdavis.vcf
Type: text/x-vcard
Size: 320 bytes
Desc: not available
URL: <
[37]https://pairlist6.pair.net/pipermail/nw-modeling-list/attachments/20191123/a3b1230b/attachment-0001.vcf
[38]>

------------------------------

Message: 2
Date: Sat, 23 Nov 2019 19:42:53 -0500
From: NW Modeling List 
To: NW Modeling List 
Subject: Re: Genesis Redbird
Message-ID: 
Content-Type: text/plain; charset="utf-8"

That's very correct. Most hobby dealers that do pre-orders don't
require
pro-payment of even a deposit.

Ed Painter - Member #70 from Narrows, VA living in Cohutta, GA

On Sat, Nov 23, 2019 at 3:11 PM NW Modeling List 
wrote:

> I know that in most cases pre-order does not mean pre-pay. It
depends
> upon where you pre-order.
>
> Walter Davis, Youngsville NC
> On 11/20/2019 9:43 PM, NW Modeling List wrote:
>
> I totally agree with you. I pre ordered two or the athearn redbirds.
I so
> believe that every manufacture has the ability to produce a bad
model. That
> is what we live with today. No more brick and mortar hobby shops
where er
> can see the finished model. This is the internet world, either good
or
> bad.
> .
>
> On Mon, Nov 18, 2019, 3:36 PM NW Modeling List 
> wrote:
>
>> I agree with Ed. I know that there are some people who do not like
to
>> preorder, but if you do not you could lose out.
>>
>> I do not feel sorrow for those that do not preorder and miss out on
a
>> model. You snooze you lose. Why would a manufacture
>>
>> Rerun a model because of the few that wanted one that missed out.
The
>> other phase Red bird yes. But will we have the some ones crying
because
>> they did not preorder ? most likely!!! I have no sympathy for those
who
>> don?t.
>>
>> Stephen Rineair
>>
>>
>>
>> Sent from Mail < [44]https://go.microsoft.com/fwlink/?LinkId=550986
[45]> for
>> Windows 10
>>
>>
>>
>> *From: *NW Modeling List via NW-Modeling-List 
>> *Sent: *Sunday, November 17, 2019 10:17 AM
>> *To: *'NW Modeling List' 
>> *Cc: *NW Modeling List 
>> *Subject: *RE: Genesis Redbird
>>
>>
>>
>> I concur. Maybe a run of red and blue in both phases ? especially
red,
>> since they only did the phase III(?) the last time.
>>
>> Phil Miller
>>
>>
>>
>> *From:* NW-Modeling-List [mailto:nw-modeling-list-bounces at nwhs.org
[49]] *On
>> Behalf Of *NW Modeling List
>> *Sent:* Saturday, November 16, 2019 2:39 PM
>> *To:* 'NW Modeling List'
>> *Subject:* RE: Genesis Redbird
>>
>>
>>
>> Yes, the redbirds sold out very quickly and have been almost
impossible
>> to find since. Hopefully this inspires Genesis to do another run. I
can't
>> remember which, but they did one of two phases, so they can do
another run
>> with the other phase.
>>
>> Marty Flick
>>
>>
>>
>> -----------------------------------------
>>
>> From: "NW Modeling List"
>> To: nw-modeling-list at nwhs.org [50]
>> Cc:
>> Sent: Saturday November 16 2019 11:26:57AM
>> Subject: Genesis Redbird
>>
>> I was fortunate to find a dealer a couple years ago taking
reservations
>> for the Genesis GP9s in red and blue. I ordered 1 of the redbirds
with
>> full dcc/sound. Out of curiosity, I?ve occasionally looked on ebay
for
>> either engine to check availability (I?m not in the market for
another nor
>> plan to sell mine). I?ve only seen 2 or 3 auctions for the blue
scheme but
>> none for the red. Are these as ?rare? as lack of auctions
indicates?
>>
>>
>>
>> Jim King
>>
>>  [51]http://smokymountainmodelworks.com/ [52]
>>
>>
>>
>>
>> ________________________________________
>> NW-Modeling-List at nwhs.org [53]
>> To change your subscription go to
>>  [54]http://list.nwhsorg/mailman/options/nw-modeling-list [55]
>> Browse the NW-Modeling-List archives at
>>  [56]http://list.nwhs.org/pipermail/nw-modeling-list/ [57]
>>
>
> ________________________________________NW-Modeling-List at nwhs.org
[58]
> To change your subscription go
tohttp://list.nwhs.org/mailman/options/nw-modeling-list [59]
> Browse the NW-Modeling-List archives
athttp://list.nwhs.org/pipermail/nw-modeling-list/ [60]
>
> ________________________________________
> NW-Modeling-List at nwhs.org [61]
> To change your subscription go to
>  [62]http://list.nwhs.org/mailman/options/nw-modeling-list [63]
> Browse the NW-Modeling-List archives at
>  [64]http://list.nwhs.org/pipermail/nw-modeling-list/ [65]
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <
[66]https://pairlist6.pair.net/pipermail/nw-modeling-list/attachments/20191123/df0dfce6/attachment-0001.html
[67]>

------------------------------

Subject: Digest Footer

________________________________________
NW-Modeling-List at nwhs.org [68]
To change your subscription go to
 [69]http://list.nwhs.org/mailman/options/nw-modeling-list [70]
Browse the NW-Mailing-List archives at
 [71]http://list.nwhs.org/pipermail/nw-modeling [72]

------------------------------

End of NW-Modeling-List Digest, Vol 200, Issue 19
*************************************************

	________________________________________
NW-Modeling-List at nwhs.org [73]
To change your subscription go to
 [74]http://list.nwhs.org/mailman/options/nw-modeling-list [75]
Browse the NW-Modeling-List archives at
 [76]http://list.nwhs.org/pipermail/nw-modeling-list/ [77]

Links:
------
[1] mailto:nw-modeling-list at nwhs.org
[2] mailto:nw-modeling-list-request at nwhs.org
[3] mailto:nw-modeling-list at nwhs.org
[4] https://pairlist6.pair.net/mailman/listinfo/nw-modeling-list
[5] https://pairlist6.pair.net/mailman/listinfo/nw-modeling-list
[6] mailto:nw-modeling-list-request at nwhsorg
[7] mailto:nw-modeling-list-owner at nwhs.org
[8] mailto:nw-modeling-list at nwhs.org
[9] mailto:nw-modeling-list at nwhs.org
[10] mailto:mailman.871.1574514289.27584.nw-modeling-list at nwhs.org
[11] mailto:nw-modeling-list at nwhs.org
[12] mailto:nw-modeling-list at nwhs.org
[13] https://go.microsoft.com/fwlink/?LinkId=550986
[14] https://go.microsoft.com/fwlink/?LinkId=550986
[15] mailto:nw-modeling-list at nwhs.org
[16] mailto:nw-modeling-list at nwhs.org
[17] mailto:nw-modeling-list at nwhs.org
[18] mailto:nw-modeling-list-bounces at nwhs.org
[19] mailto:nw-modeling-list-bounces at nwhs.org
[20] mailto:nw-modeling-list at nwhs.org
[21] mailto:nw-modeling-list at nwhs.org
[22] http://smokymountainmodelworks.com/
[23] http://smokymountainmodelworks.com/
[24] mailto:NW-Modeling-List at nwhs.org
[25] mailto:NW-Modeling-List at nwhs.org
[26] http://list.nwhs.org/mailman/options/nw-modeling-list
[27] http://list.nwhs.org/mailman/options/nw-modeling-list
[28] http://list.nwhs.org/pipermail/nw-modeling-list/
[29] http://list.nwhs.org/pipermail/nw-modeling-list/
[30] mailto:NW-Modeling-List at nwhs.org
[31] http://list.nwhs.org/mailman/options/nw-modeling-list
[32] http://list.nwhs.org/mailman/options/nw-modeling-list
[33] http://list.nwhs.org/pipermail/nw-modeling-list/
[34] http://list.nwhs.org/pipermail/nw-modeling-list/
[35]
https://pairlist6.pair.net/pipermail/nw-modeling-list/attachments/20191123/a3b1230b/attachment-0001.html
[36]
https://pairlist6.pair.net/pipermail/nw-modeling-list/attachments/20191123/a3b1230b/attachment-0001.html
[37]
https://pairlist6.pair.net/pipermail/nw-modeling-list/attachments/20191123/a3b1230b/attachment-0001.vcf
[38]
https://pairlist6.pair.net/pipermail/nw-modeling-list/attachments/20191123/a3b1230b/attachment-0001.vcf
[39] mailto:nw-modeling-list at nwhs.org
[40] mailto:nw-modeling-list at nwhs.org
[41] mailto:mailman.2.1574556223.4950.nw-modeling-list at nwhs.org
[42] mailto:nw-modeling-list at nwhs.org
[43] mailto:nw-modeling-list at nwhs.org
[44] https://go.microsoft.com/fwlink/?LinkId=550986
[45] https://go.microsoft.com/fwlink/?LinkId=550986
[46] mailto:nw-modeling-list at nwhs.org
[47] mailto:nw-modeling-list at nwhs.org
[48] mailto:nw-modeling-list at nwhsorg
[49] mailto:nw-modeling-list-bounces at nwhs.org
[50] mailto:nw-modeling-list at nwhs.org
[51] http://smokymountainmodelworks.com/
[52] http://smokymountainmodelworks.com/
[53] mailto:NW-Modeling-List at nwhs.org
[54] http://list.nwhs.org/mailman/options/nw-modeling-list
[55] http://list.nwhsorg/mailman/options/nw-modeling-list
[56] http://list.nwhs.org/pipermail/nw-modeling-list/
[57] http://list.nwhs.org/pipermail/nw-modeling-list/
[58] mailto:NW-Modeling-List at nwhs.org
[59] http://list.nwhs.org/mailman/options/nw-modeling-list
[60] http://list.nwhs.org/pipermail/nw-modeling-list/
[61] mailto:NW-Modeling-List at nwhs.org
[62] http://list.nwhs.org/mailman/options/nw-modeling-list
[63] http://list.nwhs.org/mailman/options/nw-modeling-list
[64] http://list.nwhs.org/pipermail/nw-modeling-list/
[65] http://list.nwhs.org/pipermail/nw-modeling-list/
[66]
https://pairlist6.pair.net/pipermail/nw-modeling-list/attachments/20191123/df0dfce6/attachment-0001.html
[67]
https://pairlist6.pair.net/pipermail/nw-modeling-list/attachments/20191123/df0dfce6/attachment-0001.html
[68] mailto:NW-Modeling-List at nwhs.org
[69] http://list.nwhs.org/mailman/options/nw-modeling-list
[70] http://list.nwhs.org/mailman/options/nw-modeling-list
[71] http://list.nwhs.org/pipermail/nw-modeling
[72] http://list.nwhs.org/pipermail/nw-modeling
[73] mailto:NW-Modeling-List at nwhs.org
[74] http://list.nwhs.org/mailman/options/nw-modeling-list
[75] http://list.nwhs.org/mailman/options/nw-modeling-list
[76] http://list.nwhs.org/pipermail/nw-modeling-list/
[77] http://list.nwhs.org/pipermail/nw-modeling-list/

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://pairlist6.pair.net/pipermail/nw-modeling-list/attachments/20191126/60881199/attachment-0001.html>


More information about the NW-Modeling-List mailing list