[Woodcarver] Woodcarver Digest, Vol 1337, Issue 1

[Bob Nerup]

Re cross:  Go with the foam and put a spline or backer board across the
hidden part.  Cheaper, easier and sturdy.

Bob/ Olympia WA

-----Original Message-----
From: woodcarver-bounces at six.pairlist.net
[mailto:woodcarver-bounces at six.pairlist.net] On Behalf Of
woodcarver-request at six.pairlist.net
Sent: Sunday, March 09, 2008 7:49 AM
To: woodcarver at six.pairlist.net
Subject: Woodcarver Digest, Vol 1337, Issue 1

Send Woodcarver mailing list submissions to
	woodcarver at six.pairlist.net

To subscribe or unsubscribe via the World Wide Web, visit
	http://six.pairlist.net/mailman/listinfo/woodcarver
or, via email, send a message with subject or body 'help' to
	woodcarver-request at six.pairlist.net

You can reach the person managing the list at
	woodcarver-owner at six.pairlist.net

When replying, please edit your Subject line so it is more specific
than "Re: Contents of Woodcarver digest..."


Today's Topics:

   1. I AM GETTING MARRIED !!! saturday (harry hadadi)
   2. Re: I AM GETTING MARRIED !!! saturday (CHAT) (Woodcraft Shop)
   3. Re: I AM GETTING MARRIED !!! saturday (Joe Dillett)
   4. Re: I AM GETTING MARRIED !!! saturday (Steve Lankerd Sr)
   5. Re: I AM GETTING MARRIED !!! saturday (Harry Potter)
   6. Re: I AM GETTING MARRIED !!! saturday (Jan Oegema)
   7. Re: I AM GETTING MARRIED !!! saturday (Jan Oegema)
   8. Re: I AM GETTING MARRIED !!! saturday (Donna Menke)
   9. Re: I AM GETTING MARRIED !!! saturday (Clive Goss)
  10. Re: I AM GETTING MARRIED !!! saturday (Sally Nye)
  11. Re: I AM GETTING MARRIED !!! saturday (dick carter)
  12. Re: I AM GETTING MARRIED !!! saturday (Lon Oleson)
  13. Re: Help on building a 14 foot tall cross (Merrilee Johnson)
  14. Re: Help on building a 14 foot tall cross (Linehan718 at aol.com)
  15. Re: sharpening help (phylbarb at toast.net)
  16. Re: I AM GETTING MARRIED !!! saturday (lbpatch at fbx.com)
  17. Re: sharpening help (Joe Dillett)
  18. Re: sharpening help (Kratzer, Dave)
  19. Sharpening a V-tool. (Bill Judt)
  20. Re: cottonwood bark (irmar125 at aol.com)
  21. Re: cottonwood bark (Jan Oegema)
  22. Re: I AM GETTING MARRIED !!! saturday (Linehan718 at aol.com)
  23. Re: I AM GETTING MARRIED !!! saturday (Loren Woodard)
  24. carving email (Linehan718 at aol.com)
  25. Re: carving email (Martin Leenhouts)
  26. Re: carving email (Ivan Whillock)
  27. Re: carving email (Bill Judt)
  28. Re: carving email (molarwkr K8DRJ)


----------------------------------------------------------------------

Message: 1
Date: Thu, 6 Mar 2008 11:27:45 -0800 (PST)
From: harry hadadi <harounhadadi2 at yahoo.com>
Subject: [Woodcarver] I AM GETTING MARRIED !!! saturday
To: woodcarver at six.pairlist.net, woodcarvingfun at yahoogroups.com,
	woodburning <UKPYROS at yahoogroups.com>
Message-ID: <697915.18170.qm at web53808.mail.re2.yahoo.com>
Content-Type: text/plain; charset="iso-8859-1"

Hi everyone,

The title says it all.

I am getting married this Saturday.

Just wanted to let you all know about the good news.

Harry Hadadi and Johanna Phoenix
Kalevankatu 4a a7,
80110 Joensuu.
Finland

       
---------------------------------
Looking for last minute shopping deals?  Find them fast with Yahoo! Search.
-------------- next part --------------
An HTML attachment was scrubbed...
URL:
<http://six.pairlist.net/pipermail/woodcarver/attachments/20080306/d2649625/
attachment.html>

------------------------------

Message: 2
Date: Thu, 6 Mar 2008 13:44:45 -0600
From: "Woodcraft Shop" <wdcrft at revealed.net>
Subject: Re: [Woodcarver] I AM GETTING MARRIED !!! saturday (CHAT)
To: "'[Woodcarver]'" <woodcarver at six.pairlist.net>
Message-ID: <20080306194451.1CE116C6D3 at six.pairlist.net>
Content-Type: text/plain; charset="us-ascii"

Hey Harry,
 
Many congratulations to you and the lovely Joanna.
 
I'm sure she is a very charming, beautiful and delightful lady.
 
I hope she can put up with all the wood chips around the house.
 
I won't be around then, so I'm offering congratulations on your 50th.
anniversary now!  :o)
 
The best of everything to the both of you.
 
BIG DOG
 


  _____  

From: woodcarver-bounces at six.pairlist.net
[mailto:woodcarver-bounces at six.pairlist.net] On Behalf Of harry hadadi
Sent: Thursday, March 06, 2008 1:28 PM
To: woodcarver at six.pairlist.net; woodcarvingfun at yahoogroups.com; woodburning
Subject: [Woodcarver] I AM GETTING MARRIED !!! saturday



Hi everyone,

The title says it all.

I am getting married this Saturday.

Just wanted to let you all know about the good news.

Harry Hadadi and Johanna Phoenix
Kalevankatu 4a a7,
80110 Joensuu.
Finland



  _____  

Looking for last minute shopping deals? Find
<http://us.rd.yahoo.com/evt=51734/*http://tools.search.yahoo.com/newsearch/c
ateg
ory.php?category=shopping> them fast with Yahoo! Search.
-------------- next part --------------
An HTML attachment was scrubbed...
URL:
<http://six.pairlist.net/pipermail/woodcarver/attachments/20080306/63ebfdec/
attachment.htm>

------------------------------

Message: 3
Date: Thu, 6 Mar 2008 13:56:53 -0600
From: "Joe Dillett" <jdillett at thecarvingshop.net>
Subject: Re: [Woodcarver] I AM GETTING MARRIED !!! saturday
To: "[Woodcarver]" <woodcarver at six.pairlist.net>
Message-ID: <002c01c87fc4$3da46280$3907140a at Joe>
Content-Type: text/plain; charset="iso-8859-1"

Congratulations Harry, on your marriage. I wish you blessings and happiness,
to you both, for many years to come.

Joe Dillett
The Carving Shop
645 E. LaSalle St. Suite 3
Somonauk, IL. 60552

(815) 498-9290 phone
(815) 498-9249 fax
http://www.thecarvingshop.net [business web site]
http://www.carvingmagazine.com ['Ask Joe' column]
http://community.webshots.com/user/joe_dillett
******************************************************************
-------------- next part --------------
An HTML attachment was scrubbed...
URL:
<http://six.pairlist.net/pipermail/woodcarver/attachments/20080306/b707d989/
attachment.html>

------------------------------

Message: 4
Date: Thu, 6 Mar 2008 12:04:00 -0800
From: "Steve Lankerd Sr" <scrimshaw at aptalaska.net>
Subject: Re: [Woodcarver] I AM GETTING MARRIED !!! saturday
To: "[Woodcarver]" <woodcarver at six.pairlist.net>
Message-ID: <001b01c87fc5$390fc9c0$4a63ba40 at zuke1>
Content-Type: text/plain; charset="iso-8859-1"

Good Luck Harry....


Best Regards,

Steve

Steve Lankerd Sr
Metlakatla, Alaska

http://www.stevelankerdstudio.com

  ----- Original Message ----- 
  From: harry hadadi 
  To: woodcarver at six.pairlist.net ; woodcarvingfun at yahoogroups.com ;
woodburning 
  Sent: Thursday, March 06, 2008 11:27 AM
  Subject: [Woodcarver] I AM GETTING MARRIED !!! saturday


  Gentle Subscribers :-) Please support our List with a donation:
http://wwwoodcarver.com/WWWList/WWWList.html




----------------------------------------------------------------------------
--


  Hi everyone,

  The title says it all.

  I am getting married this Saturday.

  Just wanted to let you all know about the good news.

  Harry Hadadi and Johanna Phoenix
  Kalevankatu 4a a7,
  80110 Joensuu.
  Finland



----------------------------------------------------------------------------
--
  Looking for last minute shopping deals? Find them fast with Yahoo! Search.


----------------------------------------------------------------------------
--


  _______________________________________________
  Woodcarver mailing list
  Woodcarver at six.pairlist.net
  http://six.pairlist.net/mailman/listinfo/woodcarver
-------------- next part --------------
An HTML attachment was scrubbed...
URL:
<http://six.pairlist.net/pipermail/woodcarver/attachments/20080306/3e460db5/
attachment.htm>

------------------------------

Message: 5
Date: Thu, 6 Mar 2008 14:10:51 -0600
From: "Harry Potter" <pondawater at embarqmail.com>
Subject: Re: [Woodcarver] I AM GETTING MARRIED !!! saturday
To: "[Woodcarver]" <woodcarver at six.pairlist.net>
Message-ID: <FNEOLKDAOIEIJIDNPMLHKEEECCAA.pondawater at embarqmail.com>
Content-Type: text/plain; charset="us-ascii"

Congratulations Harry may you live long and always be happy!

-----Original Message-----
From: woodcarver-bounces at six.pairlist.net
[mailto:woodcarver-bounces at six.pairlist.net]On Behalf Of harry hadadi
Sent: Thursday, March 06, 2008 1:28 PM
To: woodcarver at six.pairlist.net; woodcarvingfun at yahoogroups.com; woodburning
Subject: [Woodcarver] I AM GETTING MARRIED !!! saturday

Hi everyone,

The title says it all.

I am getting married this Saturday.

Just wanted to let you all know about the good news.

Harry Hadadi and Johanna Phoenix
Kalevankatu 4a a7,
80110 Joensuu.
Finland

  _____

Looking for last minute shopping deals? Find them fast with Yahoo! Search.
<http://us.rd.yahoo.com/evt=51734/*http://tools.search.yahoo.com/newsearch/c
ategory.php?category=shopping>
-------------- next part --------------
An HTML attachment was scrubbed...
URL:
<http://six.pairlist.net/pipermail/woodcarver/attachments/20080306/c8d3d928/
attachment-0001.html>

------------------------------

Message: 6
Date: Thu, 6 Mar 2008 15:13:48 -0500
From: "Jan Oegema" <jancarves3 at rogers.com>
Subject: Re: [Woodcarver] I AM GETTING MARRIED !!! saturday
To: "[Woodcarver]" <woodcarver at six.pairlist.net>
Message-ID: <002e01c87fc6$96f06c10$763afd63 at your27e1513d96>
Content-Type: text/plain; charset="iso-8859-1"

Hi everyone,

The title says it all.

I am getting married this Saturday.

Just wanted to let you all know about the good news.

Harry Hadadi and Johanna Phoenix
Kalevankatu 4a a7,
80110 Joensuu.
Finland
+++++++++++++++++++++++++++++++++++++++++++++++
CONGRATULATION HARRY !!
                                   Woodbutcher Jan
 

You are invited to check out my website..
       http://www.janscarvingstudio.com
 
Also take a look at my picture trail albums ...
         http://www.picturetrail.com/woodbutcher
 
http://www.carvingmagazine.com/phpBB2/  for the 'Forum
http://www.carvingmagazine.com/chat/chat.shtml  for the Chat 
Room...
 
http://www.woodcarvingillustrated.com/pdfdownloads/2082ChristmasGnome.pdf
-------------- next part --------------
An HTML attachment was scrubbed...
URL:
<http://six.pairlist.net/pipermail/woodcarver/attachments/20080306/3d9ffb3e/
attachment-0001.htm>

------------------------------

Message: 7
Date: Thu, 6 Mar 2008 15:17:24 -0500
From: "Jan Oegema" <jancarves3 at rogers.com>
Subject: Re: [Woodcarver] I AM GETTING MARRIED !!! saturday
To: "[Woodcarver]" <woodcarver at six.pairlist.net>
Message-ID: <004f01c87fc7$17b42300$763afd63 at your27e1513d96>
Content-Type: text/plain; charset="iso-8859-1"

Congratulations Harry, on your marriage. I wish you blessings and happiness,
to you both, for many years to come.

Joe Dillett
+++++++++++++++++++++++++++++++++++++++++++++++++++
At least you could invite him and (SHE WHO MUST BE OBEYED)  to come to the
GOW for honeymoon Joe 
We could have a wedding done over Now that we are used to it with Ol Don and
Sandie  
                                   Woodbutcher Jan
 

You are invited to check out my website..
       http://www.janscarvingstudio.com
 
Also take a look at my picture trail albums ...
         http://www.picturetrail.com/woodbutcher
 
http://www.carvingmagazine.com/phpBB2/  for the 'Forum
http://www.carvingmagazine.com/chat/chat.shtml  for the Chat 
Room...
 
http://www.woodcarvingillustrated.com/pdfdownloads/2082ChristmasGnome.pdf
-------------- next part --------------
An HTML attachment was scrubbed...
URL:
<http://six.pairlist.net/pipermail/woodcarver/attachments/20080306/555a99d7/
attachment.html>

------------------------------

Message: 8
Date: Thu, 6 Mar 2008 12:30:36 -0800 (PST)
From: Donna Menke <donpbk at yahoo.com>
Subject: Re: [Woodcarver] I AM GETTING MARRIED !!! saturday
To: "\[Woodcarver\]" <woodcarver at six.pairlist.net>
Message-ID: <315231.94293.qm at web54304.mail.re2.yahoo.com>
Content-Type: text/plain; charset=us-ascii

Congratulations Harry and Johanna! We wish you many, many happy years
together.
 
Donna Menke
http://www.woodworks-by-donna.com 
Author: The Ultimate Band Saw Box Book

----- Original Message ----
From: harry hadadi <harounhadadi2 at yahoo.com>
To: woodcarver at six.pairlist.net; woodcarvingfun at yahoogroups.com; woodburning
<UKPYROS at yahoogroups.com>
Sent: Thursday, March 6, 2008 1:27:45 PM
Subject: [Woodcarver] I AM GETTING MARRIED !!! saturday

Gentle Subscribers :-) Please support our List with a donation:
http://wwwoodcarver.com/WWWList/WWWList.html

Hi everyone,

The title says it all.

I am getting married this Saturday.

Just wanted to let you all know about the good news.

Harry Hadadi and Johanna Phoenix
Kalevankatu 4a a7,
80110 Joensuu.
Finland
 
      
Looking for last minute shopping deals?  
Find them fast with Yahoo! Search.

-----Inline Attachment Follows-----

_______________________________________________
Woodcarver mailing list
Woodcarver at six.pairlist.net
http://six.pairlist.net/mailman/listinfo/woodcarver





------------------------------

Message: 9
Date: Thu, 06 Mar 2008 16:38:46 -0400
From: Clive Goss <cgoss at eastlink.ca>
Subject: Re: [Woodcarver] I AM GETTING MARRIED !!! saturday
To: "[Woodcarver]" <woodcarver at six.pairlist.net>
Message-ID: <005701c87fca$139c9790$8800a8c0 at DadHasThePower>
Content-Type: text/plain; charset="iso-8859-1"

Congrats' to you both. Teach her how to sharpen your tools Harry and then
you won't have to stop carving to do it yourself !! - just a thought.


  ----- Original Message ----- 
  From: harry hadadi 
  To: woodcarver at six.pairlist.net ; woodcarvingfun at yahoogroups.com ;
woodburning 
  Sent: Thursday, March 06, 2008 3:27 PM
  Subject: [Woodcarver] I AM GETTING MARRIED !!! saturday


  Gentle Subscribers :-) Please support our List with a donation:
http://wwwoodcarver.com/WWWList/WWWList.html




----------------------------------------------------------------------------
--


  Hi everyone,

  The title says it all.

  I am getting married this Saturday.

  Just wanted to let you all know about the good news.

  Harry Hadadi and Johanna Phoenix
  Kalevankatu 4a a7,
  80110 Joensuu.
  Finland



----------------------------------------------------------------------------
--
  Looking for last minute shopping deals? Find them fast with Yahoo! Search.


----------------------------------------------------------------------------
--


  _______________________________________________
  Woodcarver mailing list
  Woodcarver at six.pairlist.net
  http://six.pairlist.net/mailman/listinfo/woodcarver
-------------- next part --------------
An HTML attachment was scrubbed...
URL:
<http://six.pairlist.net/pipermail/woodcarver/attachments/20080306/febce26d/
attachment-0001.htm>

------------------------------

Message: 10
Date: Thu, 6 Mar 2008 15:47:32 -0500
From: Sally Nye <sarolyn at accn.org>
Subject: Re: [Woodcarver] I AM GETTING MARRIED !!! saturday
To: "\[Woodcarver\]" <woodcarver at six.pairlist.net>
Message-ID: <98DA5934-80F8-4287-A8A9-C0579E91BB18 at accn.org>
Content-Type: text/plain; charset="us-ascii"; Format="flowed";
	DelSp="yes"

Hello Haroun,

So-o-o happy for you and Johanna.  Congratulations!!!

A bit of advice for a long and happy marriage:
1.  Pick up your wood chips before going to bed so your spouse won't  
get splinters in her feet making the nightly bathroom trek.
2.  Carve something nice for her or the house for no special  
occasion ...it's a just-because-you're-special day.
3.  Try to keep the wood chips out of the food & the bed.

Johanna must be one fine lady to become Mrs. Hadadi.  Good for you  
(and her).

Love to you both,
Sally and David
AKA mom
http://www.FanCarversWorld.com



On Mar 6, 2008, at 2:27 PM, harry hadadi wrote:


> Gentle Subscribers :-) Please support our List with a donation:  

> http://wwwoodcarver.com/WWWList/WWWList.html

>

> Hi everyone,

>

> The title says it all.

>

> I am getting married this Saturday.

>

> Just wanted to let you all know about the good news.

>

> Harry Hadadi and Johanna Phoenix

> Kalevankatu 4a a7,

> 80110 Joensuu.

> Finland


-------------- next part --------------
An HTML attachment was scrubbed...
URL:
<http://six.pairlist.net/pipermail/woodcarver/attachments/20080306/0b39f962/
attachment.html>

------------------------------

Message: 11
Date: Thu, 6 Mar 2008 16:00:29 -0500
From: dick carter <rhc511 at hotmail.com>
Subject: Re: [Woodcarver] I AM GETTING MARRIED !!! saturday
To: "[Woodcarver]" <woodcarver at six.pairlist.net>
Message-ID: <BAY123-W5E94781BDF112BB83D69683120 at phx.gbl>
Content-Type: text/plain; charset="iso-8859-1"



 
 
 
From: harounhadadi2 at yahoo.comSubject: [Woodcarver] I AM GETTING MARRIED !!!
saturdayHi everyone,The title says it all.I am getting married this
Saturday.Just wanted to let you all know about the good news.
++++++++++++++++++++++++++++++++++++++
Congradulations, Harry, we expect many pictures.
(... will she allow you to do woodcarving?)
 
Harry Hadadi and Johanna PhoenixKalevankatu 4a a7,80110 Joensuu.Finland
 
Dick CarterIn the Manadnock area of NHrhc511 at hotmail.comPlease check-out my
stuff at:http://www.picturetrail.com/cartersstuff
_________________________________________________________________
Climb to the top of the charts!?Play the word scramble challenge with star
power.
http://club.live.com/star_shuffle.aspx?icid=starshuffle_wlmailtextlink_jan
-------------- next part --------------
An HTML attachment was scrubbed...
URL:
<http://six.pairlist.net/pipermail/woodcarver/attachments/20080306/5e8d8c0f/
attachment.htm>

------------------------------

Message: 12
Date: Thu, 6 Mar 2008 16:37:52 -0600
From: "Lon Oleson" <olesd at nvc.net>
Subject: Re: [Woodcarver] I AM GETTING MARRIED !!! saturday
To: "[Woodcarver]" <woodcarver at six.pairlist.net>
Message-ID: <003f01c87fda$b79f07f0$6402a8c0 at olesd>
Content-Type: text/plain; charset="iso-8859-1"

congradulations ......good news for sure .....
  ----- Original Message ----- 
  From: harry hadadi 
  To: woodcarver at six.pairlist.net ; woodcarvingfun at yahoogroups.com ;
woodburning 
  Sent: Thursday, March 06, 2008 1:27 PM
  Subject: [Woodcarver] I AM GETTING MARRIED !!! saturday


  Gentle Subscribers :-) Please support our List with a donation:
http://wwwoodcarver.com/WWWList/WWWList.html




----------------------------------------------------------------------------
--


  Hi everyone,

  The title says it all.

  I am getting married this Saturday.

  Just wanted to let you all know about the good news.

  Harry Hadadi and Johanna Phoenix
  Kalevankatu 4a a7,
  80110 Joensuu.
  Finland



----------------------------------------------------------------------------
--
  Looking for last minute shopping deals? Find them fast with Yahoo! Search.


----------------------------------------------------------------------------
--


  _______________________________________________
  Woodcarver mailing list
  Woodcarver at six.pairlist.net
  http://six.pairlist.net/mailman/listinfo/woodcarver
-------------- next part --------------
An HTML attachment was scrubbed...
URL:
<http://six.pairlist.net/pipermail/woodcarver/attachments/20080306/1465a932/
attachment-0001.html>

------------------------------

Message: 13
Date: Thu, 6 Mar 2008 22:53:28 +0000
From: Merrilee Johnson <merrihat at hotmail.com>
Subject: Re: [Woodcarver] Help on building a 14 foot tall cross
To: "[Woodcarver]" <woodcarver at six.pairlist.net>
Message-ID: <BAY128-W30C08C32E70D885D28281ED3120 at phx.gbl>
Content-Type: text/plain; charset="iso-8859-1"


What a project, John!  With all the help you're getting it's going to look
great!  I took another look at your picturetrails and just saw your book
cover for the first time!  That is beautiful!  Thanks for sharing!
Merrilee~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
 

> I'm working on a project of making a 12-14 foot tall cross and the beams

need to be no less than 8 inches by 8 inches. This is for our Easter program
and it will be suspended from the center of the sanctuary so weight becomes
an issue.> > I was thinking of making hollow beams from 1/4" plywood.> I was
also thinking of using some kind of foam, but I don't think the foam could
support its own weight.> > If anyone has any ideas please let me know.> > >
God Bless,> John G.> > See my carvings at
http://www.PictureTrail.com/jgriscti> > 
 
_________________________________________________________________
Connect and share in new ways with Windows Live.
http://www.windowslive.com/share.html?ocid=TXT_TAGHM_Wave2_sharelife_012008
-------------- next part --------------
An HTML attachment was scrubbed...
URL:
<http://six.pairlist.net/pipermail/woodcarver/attachments/20080306/9cf7176e/
attachment.htm>

------------------------------

Message: 14
Date: Thu, 6 Mar 2008 20:17:02 EST
From: Linehan718 at aol.com
Subject: Re: [Woodcarver] Help on building a 14 foot tall cross
To: woodcarver at six.pairlist.net
Message-ID: <cbc.29dc70d9.3501f18e at aol.com>
Content-Type: text/plain; charset="us-ascii"

 
 
In a message dated 3/6/2008 5:53:58 P.M. Eastern Standard Time,  
merrihat at hotmail.com writes:

I'm  working on a project of making a 12-14 foot tall cross and the beams 
need to  be no less than 8 inches by 8 inches. This is for our Easter
program and 
it  will be suspended from the center of the sanctuary so weight becomes an

issue.

> 

> I was thinking of making hollow beams from 1/4"  plywood.

> I was also thinking of using some kind of foam, but I don't  think the

foam 
could support its own weight.

> 

> If anyone has  any ideas please let me know.

> 

> 

> God Bless,

>  John G.

> 

> See my carvings at  http://www.PictureTrail.com/jgriscti




how about furring strips and chicken wire covered with paper  mache.  This 
would allow it to remain fairly light so it could easily be  raised and hung

without much worry.
 
 
Maura Carving in NYC
_www.carvinginnyc.com_ (http://www.carvinginnyc.com/) 






**************It's Tax Time! Get tips, forms, and advice on AOL Money & 
Finance.      (http://money.aol.com/tax?NCID=aolprf00030000000001)
-------------- next part --------------
An HTML attachment was scrubbed...
URL:
<http://six.pairlist.net/pipermail/woodcarver/attachments/20080306/71c28c7a/
attachment.html>

------------------------------

Message: 15
Date: Thu, 6 Mar 2008 21:21:40 -0500
From: "phylbarb at toast.net" <phylbarb at toast.net>
Subject: Re: [Woodcarver] sharpening help
To: woodcarver at six.pairlist.net
Message-ID: <b91f409c696948248483cd8d32cc2d40.phylbarb at toast.net>
Content-Type: text/plain; charset="utf-8"

trying to sharpen my larger flexcut v-tools...can get the sides sharp but
not the point...noticed that some of the larger v's have a flat at the
underside of the v and the smaller ones don't...although I am sure this
topic has been discussed before I don't remember it or any links to
info...also can't remember what I did before (is this a sign of age?)...what
do I do to get the cutting point sharp?

Thanks.  
Phyllis





  



Looking for last minute shopping deals? Find them fast with Yahoo! Search.
-------------- next part --------------
An HTML attachment was scrubbed...
URL:
<http://six.pairlist.net/pipermail/woodcarver/attachments/20080306/7d69e457/
attachment.htm>

------------------------------

Message: 16
Date: Thu, 6 Mar 2008 21:34:49 -0600 (CST)
From: lbpatch at fbx.com
Subject: Re: [Woodcarver] I AM GETTING MARRIED !!! saturday
To: "\[Woodcarver\]" <woodcarver at six.pairlist.net>
Message-ID: <4043.67.1.177.1.1204860889.squirrel at webmail.fbx.com>
Content-Type: text/plain;charset=iso-8859-1


> Gentle Subscribers :-) Please support our List with a donation:

> http://wwwoodcarver.com/WWWList/WWWList.html

>

congrats!!!!!!!!!!!!!

Brad



> Hi everyone,

>

> The title says it all.

>

> I am getting married this Saturday.

>

> Just wanted to let you all know about the good news.

>

> Harry Hadadi and Johanna Phoenix

> Kalevankatu 4a a7,

> 80110 Joensuu.

> Finland

>

>

> ---------------------------------

> Looking for last minute shopping deals?  Find them fast with Yahoo!

> Search._______________________________________________

> Woodcarver mailing list

> Woodcarver at six.pairlist.net

> http://six.pairlist.net/mailman/listinfo/woodcarver





------------------------------

Message: 17
Date: Fri, 7 Mar 2008 07:08:47 -0600
From: "Joe Dillett" <jdillett at thecarvingshop.net>
Subject: Re: [Woodcarver] sharpening help
To: "[Woodcarver]" <woodcarver at six.pairlist.net>
Message-ID: <003c01c88054$614e0390$3907140a at Joe>
Content-Type: text/plain; charset="iso-8859-1"

Hi Phylis,

Sharpen the V at the bottom like a small gouge following the same curve as
the radius in the inside. The straight wings are sharpened like straight
chisels blended into the small gouge on the bottom.

Joe Dillett
The Carving Shop
645 E. LaSalle St. Suite 3
Somonauk, IL. 60552

(815) 498-9290 phone
(815) 498-9249 fax
http://www.thecarvingshop.net [business web site]
http://www.carvingmagazine.com ['Ask Joe' column]
http://community.webshots.com/user/joe_dillett
******************************************************************
  ----- Original Message ----- 
  From: phylbarb at toast.net 
  To: woodcarver at six.pairlist.net 
  Sent: Thursday, March 06, 2008 8:21 PM
  Subject: Re: [Woodcarver] sharpening help


  Gentle Subscribers :-) Please support our List with a donation:
http://wwwoodcarver.com/WWWList/WWWList.html




----------------------------------------------------------------------------
--


  trying to sharpen my larger flexcut v-tools...can get the sides sharp but
not the point...noticed that some of the larger v's have a flat at the
underside of the v and the smaller ones don't...although I am sure this
topic has been discussed before I don't remember it or any links to
info...also can't remember what I did before (is this a sign of age?)...what
do I do to get the cutting point sharp?

  Thanks.  
  Phyllis




    


----------------------------------------------------------------------------
--

  Looking for last minute shopping deals? Find them fast with Yahoo! Search.





----------------------------------------------------------------------------
--


  _______________________________________________
  Woodcarver mailing list
  Woodcarver at six.pairlist.net
  http://six.pairlist.net/mailman/listinfo/woodcarver
-------------- next part --------------
An HTML attachment was scrubbed...
URL:
<http://six.pairlist.net/pipermail/woodcarver/attachments/20080307/b49cb85f/
attachment-0001.html>

------------------------------

Message: 18
Date: Fri, 7 Mar 2008 11:33:17 -0500
From: "Kratzer, Dave" <Dave_Kratzer at wycliffe.org>
Subject: Re: [Woodcarver] sharpening help
To: "[Woodcarver]" <woodcarver at six.pairlist.net>
Message-ID: <43C784A538681544A35DF5EDE8B8507689777E at enoch.wctnet.org>
Content-Type: text/plain;	charset="windows-1250"

Phyllis

Go to this site: http://www.chrispye-woodcarving.com/slipstones/pdfs.html
and look at the document titled: Selecting & Sharpening Your V Tool. There
is more information there and answers to questions that you didn't even know
to ask about V tools.

/Dave
 
Dave Kratzer
Wycliffe Bible Translators 
Regional Recruiters North East Region
http://www.kratzerkomments.com 
http://www.picturetrail.com/dave_kratzer
http://www.wycliffe.org 
 
Wycliffe Mission: To see a Bible translation program in progress in every
language still needing one by 2025.
Wycliffe Vision: That God?s Word is accessible to all people in a language
that speaks to their heart.
Thinking About Missions?  Do a self-assessment to see if you?re ready!  Go
to http://www.wycliffe.org/go/NextStep.htm
"The greatest missionary is the Bible in the mother tongue. It never needs a
furlough, and is never considered a foreigner." --Cameron Townsend

-----Original Message-----
From: woodcarver-bounces at six.pairlist.net
[mailto:woodcarver-bounces at six.pairlist.net] On Behalf Of phylbarb at toast.net
Sent: Thursday, March 06, 2008 9:22 PM
To: woodcarver at six.pairlist.net
Subject: Re: [Woodcarver] sharpening help

Gentle Subscribers :-) Please support our List with a donation:
http://wwwoodcarver.com/WWWList/WWWList.html

    

No virus found in this outgoing message.
Checked by AVG Free Edition. 
Version: 7.5.516 / Virus Database: 269.21.6/1316 - Release Date: 3/6/2008
6:58 PM
 


------------------------------

Message: 19
Date: Fri, 07 Mar 2008 10:45:23 -0600
From: Bill Judt <bjudt at sasktel.net>
Subject: [Woodcarver] Sharpening a V-tool.
To: "[Woodcarver]" <woodcarver at six.pairlist.net>
Message-ID: <97E1DB24-6CEB-40D6-B406-F22049642FAC at sasktel.net>
Content-Type: text/plain; charset="us-ascii"; Format="flowed";
	DelSp="yes"

Gentle Subscribers:

The PDF document on V-tool sharpening by Chris Pye is about the most  
comprehensive I've ever seen.
He does what I do when sharpening... BUT Chris found a way - and spent  
the time - to put the techniques into a readable an comprehensive  
tutorial. Very well done. My hat is off to you, Chris!!!

Blessings and Peace,

Bill

My books are for sale at: http://wwwoodcarver.com/Books/index.html
W.F. Judt,
46 Harvard Cres,
Saskatoon, Saskatchewan,
S7H3R1
PH: 306-373-6649
bjudt at sasktel.net
Website: http://www.wwwoodcarver.com






On 7-Mar-08, at 10:33 AM, Kratzer, Dave wrote:


> Go to this site: http://www.chrispye-woodcarving.com/slipstones/pdfs.html 

>  and look at the document titled: Selecting & Sharpening Your V  

> Tool. There is more information there and answers to questions that  

> you didn't even know to ask about V tools.


-------------- next part --------------
An HTML attachment was scrubbed...
URL:
<http://six.pairlist.net/pipermail/woodcarver/attachments/20080307/fe63dae2/
attachment-0001.htm>

------------------------------

Message: 20
Date: Fri, 07 Mar 2008 18:54:37 -0500
From: irmar125 at aol.com
Subject: Re: [Woodcarver] cottonwood bark
To: woodcarver at six.pairlist.net
Message-ID: <8CA4EC5BC479137-13F8-21EF at webmail-me03.sysops.aol.com>
Content-Type: text/plain; charset="us-ascii"

I was given three names of people who sell cottonwood bark, one person sells
it at about $3-$4 a lb. but I had a problem with comp. and lost allot of
information. Those names were among them.If someone out there can send me
there e-mail address again I would really appreciate it..............thanks
Irwin Reisman
-------------- next part --------------
An HTML attachment was scrubbed...
URL:
<http://six.pairlist.net/pipermail/woodcarver/attachments/20080307/77e868a9/
attachment.html>

------------------------------

Message: 21
Date: Fri, 7 Mar 2008 19:05:36 -0500
From: "Jan Oegema" <jancarves3 at rogers.com>
Subject: Re: [Woodcarver] cottonwood bark
To: "[Woodcarver]" <woodcarver at six.pairlist.net>
Message-ID: <003a01c880b0$23153150$763afd63 at your27e1513d96>
Content-Type: text/plain; charset="iso-8859-1"

I was given three names of people who sell cottonwood bark, one person sells
it at about $3-$4 a lb. but I had a problem with comp. and lost allot of
information. Those names were among them.If someone out there can send me
there e-mail address again I would really appreciate it..............thanks
Irwin Reisman

BISSO, ALEX
E-mail Address(es):
  albisso at bresnan.net
  albisso at bresnan.net
Personal Information:
  Address:
    44 Rimrock Rd 

    Billings MT 59106
    U S
  Phone: 406 655 4609


                                   Woodbutcher Jan
 

You are invited to check out my website..
       http://www.janscarvingstudio.com
 
Also take a look at my picture trail albums ...
         http://www.picturetrail.com/woodbutcher
 
http://www.carvingmagazine.com/phpBB2/  for the 'Forum
http://www.carvingmagazine.com/chat/chat.shtml  for the Chat 
Room...
 
http://www.woodcarvingillustrated.com/pdfdownloads/2082ChristmasGnome.pdf
-------------- next part --------------
An HTML attachment was scrubbed...
URL:
<http://six.pairlist.net/pipermail/woodcarver/attachments/20080307/cab7a3fe/
attachment-0001.htm>

------------------------------

Message: 22
Date: Sat, 8 Mar 2008 13:32:22 EST
From: Linehan718 at aol.com
Subject: Re: [Woodcarver] I AM GETTING MARRIED !!! saturday
To: woodcarver at six.pairlist.net
Message-ID: <d54.267aec1a.350435b6 at aol.com>
Content-Type: text/plain; charset="us-ascii"


Hi Harry and Johanna.
 
Today is the big day.  Congratulations.  I hope it is beautiful  where you 
are!!!  One of the secrets of marriage is to both have your  own interests
so as 
not to get on each others nerves too often.  So carve  on Harry but also 
remember to shower your bride with lots of love and  affection.  Give her
the best 
thing you can give, lots of your  time. All my best for you both.
 
Maura Carving in NYC
_www.carvinginnyc.com_ (http://www.carvinginnyc.com/) 






**************It's Tax Time! Get tips, forms, and advice on AOL Money & 
Finance.      (http://money.aol.com/tax?NCID=aolprf00030000000001)
-------------- next part --------------
An HTML attachment was scrubbed...
URL:
<http://six.pairlist.net/pipermail/woodcarver/attachments/20080308/b7c60cd9/
attachment-0001.html>

------------------------------

Message: 23
Date: Sat, 8 Mar 2008 17:45:03 -0600
From: "Loren Woodard" <lorenwoodard at charter.net>
Subject: Re: [Woodcarver] I AM GETTING MARRIED !!! saturday
To: "'[Woodcarver]'" <woodcarver at six.pairlist.net>
Message-ID: <01cf01c88176$6e43f2d0$0301a8c0 at YOUR4556B190FD>
Content-Type: text/plain; charset="windows-1250"

Congratulations Harry!

 

Loren Woodard

 

   _____  

From: woodcarver-bounces at six.pairlist.net
[mailto:woodcarver-bounces at six.pairlist.net] On Behalf Of harry hadadi
Sent: Thursday, March 06, 2008 1:28 PM
To: woodcarver at six.pairlist.net; woodcarvingfun at yahoogroups.com; woodburning
Subject: [Woodcarver] I AM GETTING MARRIED !!! saturday

 

Hi everyone,

The title says it all.

I am getting married this Saturday.

Just wanted to let you all know about the good news.

Harry Hadadi and Johanna Phoenix
Kalevankatu 4a a7,
80110 Joensuu.
Finland

  

   _____  

Looking for last minute shopping deals? HYPERLINK
"http://us.rd.yahoo.com/evt=51734/*http:/tools.search.yahoo.com/newsearch/ca
tegory.php?category=shopping"Find them fast with Yahoo! Search.

No virus found in this incoming message.
Checked by AVG.
Version: 7.5.518 / Virus Database: 269.21.7/1319 - Release Date: 3/8/2008
10:14 AM


No virus found in this outgoing message.
Checked by AVG. 
Version: 7.5.518 / Virus Database: 269.21.7/1319 - Release Date: 3/8/2008
10:14 AM
 
-------------- next part --------------
An HTML attachment was scrubbed...
URL:
<http://six.pairlist.net/pipermail/woodcarver/attachments/20080308/93839da6/
attachment-0001.htm>

------------------------------

Message: 24
Date: Sun, 9 Mar 2008 03:50:58 EDT
From: Linehan718 at aol.com
Subject: [Woodcarver] carving email
To: woodcarver at six.pairlist.net
Message-ID: <bf7.2c519056.3504f0e2 at aol.com>
Content-Type: text/plain; charset="us-ascii"

 
Just out of curiosity, I'm wondering if anyone else has rec'd this  email.
I 
have rec'd 2 of them coming from 2 different email adds.   Pretty sure its 
spam.   Even if it weren't, the project is too big for  me to handle but in
my 
mind, I'm fantasizing about it.  Imagine carving  that big of a sculpture,
it 
would be cool!!!
 
 
 
 
Hello,
I will like to know if you sell carvings. Whats the unit price  incluing
tax. 
I want a wooden carving with the following  information.

Animal: Elephant
Type of wood: basswood
Finish:  coated with enamel
Dimension: 8 feet 3 inches tall and 12 feet long.
Type  of elephant: African
1)It should be realistic
2)outdoor  setting

Thank you 
John williams




Maura Carving in NYC
_www.carvinginnyc.com_ (http://www.carvinginnyc.com/) 






**************It's Tax Time! Get tips, forms, and advice on AOL Money & 
Finance.      (http://money.aol.com/tax?NCID=aolprf00030000000001)
-------------- next part --------------
An HTML attachment was scrubbed...
URL:
<http://six.pairlist.net/pipermail/woodcarver/attachments/20080309/33fe01fd/
attachment.html>

------------------------------

Message: 25
Date: Sun, 9 Mar 2008 06:01:55 -0700 (PDT)
From: Martin Leenhouts <martin_leenhouts at yahoo.com>
Subject: Re: [Woodcarver] carving email
To: "\[Woodcarver\]" <woodcarver at six.pairlist.net>
Message-ID: <842243.22067.qm at web52402.mail.re2.yahoo.com>
Content-Type: text/plain; charset="iso-8859-1"

Yes, I got this email too. I can't figure out why someone would spam this
kind of message. Maybe they're looking for someone to give them bank account
info so they can send them the initial $100,000 downpayment to start carving
the elephant? Maybe they pay in peanuts?
   
  Gotta say this is the wierdest spam I've gotten. The dimensions are so
strange too. Why not just 8 feet, but rather 8 feet 3 inches, like the extra
3 inches is that important.
   
  I've got a tiny carved elephant from Thailand. Maybe if I put it in water
it will expand to 8 ft. 3 inches? Hey! This email could be my ticket to
carving nirvana! I better reply right away!!!
  Ha!
   
  Marty
  www.MyChipCarving.com
  

Linehan718 at aol.com wrote:
  Gentle Subscribers :-) Please support our List with a donation:
http://wwwoodcarver.com/WWWList/WWWList.html

      Just out of curiosity, I'm wondering if anyone else has rec'd this
email.  I have rec'd 2 of them coming from 2 different email adds.  Pretty
sure its spam.   Even if it weren't, the project is too big for me to handle
but in my mind, I'm fantasizing about it.  Imagine carving that big of a
sculpture, it would be cool!!!
   
   
   
   
  Hello,
I will like to know if you sell carvings. Whats the unit price incluing tax.
I want a wooden carving with the following information.
 
Animal: Elephant
Type of wood: basswood
Finish: coated with enamel
Dimension: 8 feet 3 inches tall and 12 feet long.
Type of elephant: African
1)It should be realistic
2)outdoor setting

Thank you 
John williams


   
    Maura Carving in NYC
www.carvinginnyc.com







    
---------------------------------
  It's Tax Time! Get tips, forms and advice on AOL Money & Finance.
_______________________________________________
Woodcarver mailing list
Woodcarver at six.pairlist.net
http://six.pairlist.net/mailman/listinfo/woodcarver

       
---------------------------------
Never miss a thing.   Make Yahoo your homepage.
-------------- next part --------------
An HTML attachment was scrubbed...
URL:
<http://six.pairlist.net/pipermail/woodcarver/attachments/20080309/342eeda8/
attachment-0001.htm>

------------------------------

Message: 26
Date: Sun, 9 Mar 2008 08:45:06 -0500
From: "Ivan Whillock" <carve at whillock.com>
Subject: Re: [Woodcarver] carving email
To: "[Woodcarver]" <woodcarver at six.pairlist.net>
Message-ID: <C7C1B6819B674BBAAC7DEFD46C95F7FC at ome>
Content-Type: text/plain; charset="iso-8859-1"

This offer may or not be real.  I'd be careful, however.

Some time ago, I received an inquiry about an elephant sculpture similar to
a commission I had once done, which was pictured on my website.  I never do
work without a contract and a down payment so I asked the inquirer to give
me his address so I could mail him a contract.  He didn't reply.  Weeks
later I got another email saying that he had been ill and would like to go
ahead with the commission, asking where he could send the cashier's check.
I held firm that I wouldn't proceed without a shipping address, and a signed
contract.  No reply.  After another few weeks, he emailed again, that his
client was in a rush for the elephant, indicating he was ready to send me a
check immediately.  Since the lack of a specific address had been obvious
from the beginning, the deal smelled fishy from the start, so I didn't
respond to his final email.  A week later I got a cashier's check in the
mail for $37,985, or some such odd figure, slightly less than the $40,000
ballpark figure I had
  given him.  It was a check from a bank in Nigeria, with no note or return
address.  Shortly after that, I got another email asking if I had gotten his
check.  By then it I had not doubt that the deal was a sham, so I took the
check to the post office to report mail fraud, and then to the police.

They told of many people getting caught in schemes of every description
where they are sent a phony check and then are asked, in one scheme or
another, to return part of it, which, of course, would be the victim's real
money.  Then, only after the processing delays, the very real looking check
turns out to be phony, too late for the victim to stop payment on the real
check. 

An amazing number of people are taken by these schemes, including, the post
office officials told me, lawyers and others whom one would think would be
most wary.

Don't be baited.  Take control of the situation, set your own guidelines,
get mailing and delivery addresses, insist on a signed contract.  Do
business in person or by mail, rather than online, unless you have a PayPal
system, etc. where you know the transaction will involve real funds, rather
than a phony check.  Never accept an "over-payment" that puts you into
returning good money for bad.


Ivan Whillock Studio
122 NE 1st Avenue
Faribault, MN  55021
Visit my website at
http://www.whillock.com
Visit my Picture Trail album at
http://www.picturetrail.com/gallery/view?username=ivancarve
  From: Linehan718 at aol.com 
  Sent: Sunday, March 09, 2008 2:50 AM
  To: woodcarver at six.pairlist.net 
  Subject: [Woodcarver] carving email


  Gentle Subscribers :-) Please support our List with a donation:
http://wwwoodcarver.com/WWWList/WWWList.html




----------------------------------------------------------------------------
--


  Just out of curiosity, I'm wondering if anyone else has rec'd this email.
I have rec'd 2 of them coming from 2 different email adds.  Pretty sure its
spam.   Even if it weren't, the project is too big for me to handle but in
my mind, I'm fantasizing about it.  Imagine carving that big of a sculpture,
it would be cool!!!




  Hello,
  I will like to know if you sell carvings. Whats the unit price incluing
tax. I want a wooden carving with the following information.
   
  Animal: Elephant
  Type of wood: basswood
  Finish: coated with enamel
  Dimension: 8 feet 3 inches tall and 12 feet long.
  Type of elephant: African
  1)It should be realistic
  2)outdoor setting

  Thank you 
  John williams


  Maura Carving in NYC
  www.carvinginnyc.com









----------------------------------------------------------------------------
--
  It's Tax Time! Get tips, forms and advice on AOL Money & Finance.


----------------------------------------------------------------------------
--


  _______________________________________________
  Woodcarver mailing list
  Woodcarver at six.pairlist.net
  http://six.pairlist.net/mailman/listinfo/woodcarver
-------------- next part --------------
An HTML attachment was scrubbed...
URL:
<http://six.pairlist.net/pipermail/woodcarver/attachments/20080309/614c7a56/
attachment.html>

------------------------------

Message: 27
Date: Sun, 09 Mar 2008 08:01:46 -0600
From: Bill Judt <bjudt at sasktel.net>
Subject: Re: [Woodcarver] carving email
To: "[Woodcarver]" <woodcarver at six.pairlist.net>
Message-ID: <16CF353B-4EA4-48F1-9E32-8C10ACFC51C0 at sasktel.net>
Content-Type: text/plain; charset="us-ascii"; Format="flowed";
	DelSp="yes"

Maura:

Any decent prospective customer wanting to engage a carver in a  
project - even a small one - will discuss the project directly with  
the carver. Furthermore, a good customer will want to engage the  
carver at a trust level... trustworthiness being demonstrated by BOTH  
parties.
I've received a few emails like yours, and they were...
SPAM-FRAUD-SPAM-FRAUD!!

Blessings and Peace,

Bill

My books are for sale at: http://wwwoodcarver.com/Books/index.html
W.F. Judt,
46 Harvard Cres,
Saskatoon, Saskatchewan,
S7H3R1
PH: 306-373-6649
bjudt at sasktel.net
Website: http://www.wwwoodcarver.com






On 9-Mar-08, at 1:50 AM, linehan718 at aol.com wrote:


> Just out of curiosity, I'm wondering if anyone else has rec'd this  

> email.  I have rec'd 2 of them coming from 2 different email adds.   

> Pretty sure its spam.   Even if it weren't, the project is too big  

> for me to handle but in my mind, I'm fantasizing about it.  Imagine  

> carving that big of a sculpture, it would be cool!!!

>

>

>

>

> Hello,

> I will like to know if you sell carvings. Whats the unit price  

> incluing tax. I want a wooden carving with the following information.

>

> Animal: Elephant

> Type of wood: basswood

> Finish: coated with enamel

> Dimension: 8 feet 3 inches tall and 12 feet long.

> Type of elephant: African

> 1)It should be realistic

> 2)outdoor setting

>

> Thank you

> John williams

>


-------------- next part --------------
An HTML attachment was scrubbed...
URL:
<http://six.pairlist.net/pipermail/woodcarver/attachments/20080309/b7f7123d/
attachment-0001.htm>

------------------------------

Message: 28
Date: Sun, 9 Mar 2008 10:48:27 -0400
From: "molarwkr K8DRJ" <molarwkr at charter.net>
Subject: Re: [Woodcarver] carving email
To: "[Woodcarver]" <woodcarver at six.pairlist.net>
Message-ID: <82A0D90B12754AC5A67E6685D83A5D62 at MePC>
Content-Type: text/plain; charset="iso-8859-1"

Now you can get a Carvewright machine---have it scan an elephant and then
carve it.  Just borrow the one from the zoo to make the copy from which to
work
  ----- Original Message ----- 
  From: Martin Leenhouts 
  To: [Woodcarver] 
  Sent: Sunday, March 09, 2008 9:01 AM
  Subject: Re: [Woodcarver] carving email


  Gentle Subscribers :-) Please support our List with a donation:
http://wwwoodcarver.com/WWWList/WWWList.html




  __________ NOD32 2932 (20080309) Information __________

  This message was checked by NOD32 antivirus system.
  http://www.eset.com



----------------------------------------------------------------------------
--


  Yes, I got this email too. I can't figure out why someone would spam this
kind of message. Maybe they're looking for someone to give them bank account
info so they can send them the initial $100,000 downpayment to start carving
the elephant? Maybe they pay in peanuts?

  Gotta say this is the wierdest spam I've gotten. The dimensions are so
strange too. Why not just 8 feet, but rather 8 feet 3 inches, like the extra
3 inches is that important.

  I've got a tiny carved elephant from Thailand. Maybe if I put it in water
it will expand to 8 ft. 3 inches? Hey! This email could be my ticket to
carving nirvana! I better reply right away!!!
  Ha!

  Marty
  www.MyChipCarving.com


  Linehan718 at aol.com wrote:
    Gentle Subscribers :-) Please support our List with a donation:
http://wwwoodcarver.com/WWWList/WWWList.html


    Just out of curiosity, I'm wondering if anyone else has rec'd this
email.  I have rec'd 2 of them coming from 2 different email adds.  Pretty
sure its spam.   Even if it weren't, the project is too big for me to handle
but in my mind, I'm fantasizing about it.  Imagine carving that big of a
sculpture, it would be cool!!!




    Hello,
    I will like to know if you sell carvings. Whats the unit price incluing
tax. I want a wooden carving with the following information.
     
    Animal: Elephant
    Type of wood: basswood
    Finish: coated with enamel
    Dimension: 8 feet 3 inches tall and 12 feet long.
    Type of elephant: African
    1)It should be realistic
    2)outdoor setting

    Thank you 
    John williams


    Maura Carving in NYC
    www.carvinginnyc.com








----------------------------------------------------------------------------
    It's Tax Time! Get tips, forms and advice on AOL Money & Finance.
    _______________________________________________
    Woodcarver mailing list
    Woodcarver at six.pairlist.net
    http://six.pairlist.net/mailman/listinfo/woodcarver




----------------------------------------------------------------------------
--
  Never miss a thing. Make Yahoo your homepage. 


----------------------------------------------------------------------------
--


  _______________________________________________
  Woodcarver mailing list
  Woodcarver at six.pairlist.net
  http://six.pairlist.net/mailman/listinfo/woodcarver


  __________ NOD32 2932 (20080309) Information __________

  This message was checked by NOD32 antivirus system.
  http://www.eset.com
-------------- next part --------------
An HTML attachment was scrubbed...
URL:
<http://six.pairlist.net/pipermail/woodcarver/attachments/20080309/d7865eb3/
attachment.html>

------------------------------

_______________________________________________
Woodcarver mailing list
Woodcarver at six.pairlist.net
http://six.pairlist.net/mailman/listinfo/woodcarver

End of Woodcarver Digest, Vol 1337, Issue 1
*******************************************

No virus found in this incoming message.
Checked by AVG. 
Version: 7.5.518 / Virus Database: 269.21.7/1322 - Release Date: 3/9/2008
12:17 PM
 

No virus found in this outgoing message.
Checked by AVG. 
Version: 7.5.518 / Virus Database: 269.21.7/1322 - Release Date: 3/9/2008
12:17 PM