Modeling N&W RS-3s in 1956

[NW Modeling List]

I may be wrong but I recollect it was the Durham Line the RS-3's were first assigned to.  In the end they were assigned to locations like Norfolk and Sandusky.

Ed Painter Narrows, VA living in Russellville, AR

From: nw-modeling-list-bounces at nwhs.org [mailto:nw-modeling-list-bounces at nwhs.org] On Behalf Of NW Modeling List
Sent: Monday, September 19, 2011 1:55 PM
To: 'NW Modeling List'
Subject: RE: Modeling N&W RS-3s in 1956

They were used on the Peavine in the 1956-57 time period, too.  Gary Rolih, Cincinnati

From: nw-modeling-list-bounces at nwhs.org [mailto:nw-modeling-list-bounces at nwhs.org] On Behalf Of NW Modeling List
Sent: Friday, September 16, 2011 1:01 PM
To: NW Modeling List
Subject: Re: Modeling N&W RS-3s in 1956

The RS3s supposedly were originally assigned as a group to the Winston-Salem to Roanoke line.  However, there is a picture on page 274 of Mason Cooper's new book on the POCAHONTAS DIV published by our society showing an eastbound coal train with three ALCO RS11s and one RS3 at Big Four, WV on the "POKY" on May 10, 1956. The lead unit, at least is still in the black steam era colors and lettering.  Don't know if this was an unusual occurrence but i have seen other pictures of RS3s which had wandered off from the Winston-Salem line.
On Wed, Sep 14, 2011 at 7:45 PM, NW Modeling List <nw-modeling-list at nwhs.org<mailto:nw-modeling-list at nwhs.org>> wrote:
Where were they assigned?

Philip Taylor
Never assume that the way it is now is the way it has always been
http://acwrr.blogspot.com<http://acwrr.blogspot.com/>
________________________________
From: NW Modeling List <nw-modeling-list at nwhs.org<mailto:nw-modeling-list at nwhs.org>>
To: NW Modeling List <nw-modeling-list at nwhs.org<mailto:nw-modeling-list at nwhs.org>>
Sent: Wednesday, September 14, 2011 11:23 AM
Subject: Re: Modeling N&W RS-3s in 1956
To add to this, since the RS3s were delivered with dual controls, the cab window arrangement is different than on "stock" phase III RS3s.  Check pictures and maybe use an extra shell of any phase model to modify the cab sides.
On Tue, Sep 13, 2011 at 10:45 AM, NW Modeling List <nw-modeling-list at nwhs.org<mailto:nw-modeling-list at nwhs.org>> wrote:
Neither the Atlas or Athearn RS-3 models are made with Phase-III carbodies.  Stewart made HO RS-3's with Phase-III carbodies.  Finding a Stewart shell may take a bit of effort but through internet searches you will likely find one over time.  I did a search and found one that had already sold so they are out there.  I'd also caution you to look at the cab window size, the stack orientation, and short hood details.  The RS-3's bought new by the N&W had dynamic brakes which effected the location of the number boards and added addition detail to the short hood.  Looking at pictures of the 3 sides and top of the short hood will show these details.  As for the early N&W diesel lettering, I don't know of and decals produced to specifically address this scheme.  My suggestion, since the lettering was the same style and gold color used on stream locomotives would be to investigate the various decal sets made for N&W steam locomotives and see if you can find a size match.  The Microscale set includes different sizes of lettering.

Ed Painter - Narrows, VA living in Russellville, AR

From: nw-modeling-list-bounces at nwhs.org<mailto:nw-modeling-list-bounces at nwhs.org> [mailto:nw-modeling-list-bounces at nwhs.org<mailto:nw-modeling-list-bounces at nwhs.org>] On Behalf Of NW Modeling List
Sent: Monday, September 12, 2011 8:27 PM
To: nw-modeling-list at nwhs.org<mailto:nw-modeling-list at nwhs.org>
Subject: Modelling N&W RS-3s in 1956

Hi all,

I've always been fond of RS-3s and upon realizing quickly that the N&W acquired eight of them as their first diesels in 1955 I've decided I'd like to investigate modelling them in HO-scale.

First off, I've not found any models painted in the as-delivered paint scheme which I understand is all-over black with Dulux gold lettering yes? I know they were originally numbered 92-99 then renumbered 300-307 in 1956.

Of those created by Athearn/MDC, Atlas and Bachmann which would be closest to a Phase-III unit? if I cannot acquire a Phase III unit I'll use whatever's the best stand-in. Can anyone recommend a good decal set? I understand the steam engine decals might be a good choice but wanted to get a second opinion.

Thank you in advance
Alvie Hearren

________________________________________
NW-Modeling-List at nwhs.org<mailto:NW-Modeling-List at nwhs.org>
To change your subscription go to
http://list.nwhs.org/mailman/options/nw-modeling-list
Browse the NW-Modeling-List archives at
http://list.nwhs.org/pipermail/nw-modeling-list/



--
Dan Mulhearn
Pipestem WV

________________________________________
NW-Modeling-List at nwhs.org<mailto:NW-Modeling-List at nwhs.org>
To change your subscription go to
http://list.nwhs.org/mailman/options/nw-modeling-list
Browse the NW-Modeling-List archives at
http://list.nwhs.org/pipermail/nw-modeling-list/

________________________________________
NW-Modeling-List at nwhs.org<mailto:NW-Modeling-List at nwhs.org>
To change your subscription go to
http://list.nwhs.org/mailman/options/nw-modeling-list
Browse the NW-Modeling-List archives at
http://list.nwhs.org/pipermail/nw-modeling-list/



--
Dan Mulhearn
Pipestem WV
________________________________

No virus found in this message.
Checked by AVG - www.avg.com<http://www.avg.com>
Version: 10.0.1410 / Virus Database: 1520/3900 - Release Date: 09/16/11
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://six.pairlist.net/pipermail/nw-modeling-list/attachments/20110919/f6e47fce/attachment.htm>