Trouble with BLY Class J

[NW Modeling List]

I can only give you a generic answer, observed when running many DCC  
equipped locos on pure DC...when the DC voltage is right on the edge of being  
enough for the DCC loco to respond, the kind of behavior you describe is  
common.  If the stalling/stopping goes away with higher voltage settings,  
that's the issue, and it's inherent in running DCC on DC.  They simply take  
higher voltage to respond.
 
Dave Phelps
 
 
In a message dated 2/26/2014 3:19:02 P.M. Eastern Standard Time,  
nw-modeling-list at nwhs.org writes:

 
Has anyone had issues with the HO BLI Class J  stalling/stopping when run 
on a strictly DC layout?  No contact issues  are apparent.   
Placed on the list by INFO at  N&WHS


 
____________________________________
 (http://www.avast.com/)  
This  email is free from viruses and malware because _avast!  Antivirus_ 
(http://www.avast.com/)  protection is active.  


________________________________________
NW-Modeling-List at nwhs.org
To  change your subscription go  to
http://list.nwhs.org/mailman/options/nw-modeling-list
Browse the  NW-Modeling-List archives  at
http://list.nwhs.org/pipermail/nw-modeling-list/
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://six.pairlist.net/pipermail/nw-modeling-list/attachments/20140226/4eff575b/attachment.html>