Trouble with BLY Class J

[NW Modeling List]

Make very sure the wire harness between the locomotive and tender is
secured.
On Feb 27, 2014 6:50 AM, "NW Modeling List" <nw-modeling-list at nwhs.org>
wrote:


>  I can only give you a generic answer, observed when running many DCC

> equipped locos on pure DC...when the DC voltage is right on the edge of

> being enough for the DCC loco to respond, the kind of behavior you describe

> is common.  If the stalling/stopping goes away with higher voltage

> settings, that's the issue, and it's inherent in running DCC on DC.  They

> simply take higher voltage to respond.

>

> Dave Phelps

>

>  In a message dated 2/26/2014 3:19:02 P.M. Eastern Standard Time,

> nw-modeling-list at nwhs.org writes:

>

>  Has anyone had issues with the HO BLI Class J stalling/stopping when run

> on a strictly DC layout?  No contact issues are apparent.

>

>

>

> Placed on the list by INFO at N&WHS

>

>

> ------------------------------

>   [image: http://www.avast.com/] <http://www.avast.com/>

>

> This email is free from viruses and malware because avast! Antivirus<http://www.avast.com/>protection is active.

>

>

>

> ________________________________________

> NW-Modeling-List at nwhs.org

> To change your subscription go to

> http://list.nwhs.org/mailman/options/nw-modeling-list

> Browse the NW-Modeling-List archives at

> http://list.nwhs.org/pipermail/nw-modeling-list/

>

>

> ________________________________________

> NW-Modeling-List at nwhs.org

> To change your subscription go to

> http://list.nwhs.org/mailman/options/nw-modeling-list

> Browse the NW-Modeling-List archives at

> http://list.nwhs.org/pipermail/nw-modeling-list/

>

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://six.pairlist.net/pipermail/nw-modeling-list/attachments/20140227/537480ba/attachment.html>