E2a Motor / Gearbox Recommendations

[NW Modeling List]

>From what I remember, NWSL only has 1 motor that fits (flat-can Sagami) and
you'll have to cut off 1 of the shafts with a Dremel to fit the cab.  You'll
need a Universal drive (ball/socket) set and a gearbox.  NWSL once listed
conversion kits for many engines, including the E-2a because this was once
imported by the previous owner.  Check their web site for conversion
project.

Jim King
www.smokymountainmodelworks.com

-----Original Message-----
From: NW Modeling List <nw-modeling-list at nwhs.org> 
Sent: Saturday, May 18, 2019 11:59 AM
To: N&W Modeling List <nw-modeling-list at nwhs.org>
Subject: E2a Motor / Gearbox Recommendations

Hi list. I have an NWSL E2a (1940 version) in my cabinet that I will
eventually re-gear and re-motor.  Given that NWSL may go/is going out of
business, I figured I better secure what I need now.  

Advice on specific Motor / gearbox combinations that have worked for others
in this model would be appreciated!

Thanks, 

Matt Goodman
Columbus, Ohio US