E2a Motor / Gearbox Recommendations

[NW Modeling List]

Funny I have 1 too that I need the same info and I need help redoing a jawn henry .

Sent from Mail for Windows 10

Bob Anson
USAF, Retired, TSGT
Jacksonville, FL

From: NW Modeling List
Sent: Monday, May 20, 2019 10:00 AM
To: nw-modeling-list at nwhs.org
Subject: RE: E2a Motor / Gearbox Recommendations

>From what I remember, NWSL only has 1 motor that fits (flat-can Sagami) and
you'll have to cut off 1 of the shafts with a Dremel to fit the cab.  You'll
need a Universal drive (ball/socket) set and a gearbox.  NWSL once listed
conversion kits for many engines, including the E-2a because this was once
imported by the previous owner.  Check their web site for conversion
project.

Jim King
www.smokymountainmodelworks.com

-----Original Message-----
From: NW Modeling List <nw-modeling-list at nwhs.org> 
Sent: Saturday, May 18, 2019 11:59 AM
To: N&W Modeling List <nw-modeling-list at nwhs.org>
Subject: E2a Motor / Gearbox Recommendations

Hi list. I have an NWSL E2a (1940 version) in my cabinet that I will
eventually re-gear and re-motor.  Given that NWSL may go/is going out of
business, I figured I better secure what I need now.  

Advice on specific Motor / gearbox combinations that have worked for others
in this model would be appreciated!

Thanks, 

Matt Goodman
Columbus, Ohio US



________________________________________
NW-Modeling-List at nwhs.org
To change your subscription go to
http://list.nwhs.org/mailman/options/nw-modeling-list
Browse the NW-Modeling-List archives at
http://list.nwhs.org/pipermail/nw-modeling-list/

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://pairlist6.pair.net/pipermail/nw-modeling-list/attachments/20190520/83041976/attachment.html>