Tender inspection hatches

NW Modeling List nw-modeling-list at nwhs.org
Fri Jun 5 23:32:56 EDT 2020


To add to what Jim said......With the big tenders for engine classes such as A, J and Y, the hatch also gives access to a strainer that is in place in the bottom of the water leg. One on each side.  The purpose of them is to try and catch any trash, rust flakes, etc. before it gets into the tank hoses, injectors, water pump and eventually the boiler.  The strainer sits over a valve (one on each side) that can be shut off by someone up on the tender deck. Another use for the hatches is to hang a fan over it to move air through the tender when the new guy is down in the tank cleaning it out! Will Sadler Sent from my Verizon, Samsung Galaxy smartphone
-------- Original message --------From: NW Modeling List <nw-modeling-list at nwhs.org> Date: 6/5/20  8:46 PM  (GMT-05:00) To: NW Modeling List via NW-Modeling-List <nw-modeling-list at nwhs.org> Subject: Re: Tender inspection hatches 
        The plates were in this location for inspection of the water "legs", which would otherwise be difficult to reach from inside the rest of the cistern. In many of the tenders, this was a retrofit, indicating that experience with inspection inspired this innovation. It may not have been unique to N&W, but I think it may have been.Jim Nichols
        
        
            
                
                
                    On Friday, June 5, 2020, 05:37:49 PM CDT, NW Modeling List via NW-Modeling-List <nw-modeling-list at nwhs.org> wrote:
                
                
                
                Steam tenders had a large (?) round inspection plate in the lower forward lt & rt corners. Was there a reason for this being in that location? Was there a shutoff valve or something in that area that needed periodic maintenance? Strainer/filter? Were the interiors of all tanks open for access through the baffle plates from rear to front through the water fill hatch?Roger HuberDeer Creek Locomotive Works________________________________________NW-Modeling-List at nwhs.orgTo change your subscription go tohttp://list.nwhs.org/mailman/options/nw-modeling-listBrowse the NW-Modeling-List archives athttp://list.nwhs.org/pipermail/nw-modeling-list/
            
        
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://pairlist6.pair.net/pipermail/nw-modeling-list/attachments/20200605/1a3e6b16/attachment.html>


More information about the NW-Modeling-List mailing list