N&W caboose project Spring Mills Depot status

[NW Modeling List]

 Mike: All Y6 and sub classes have the sloped stack. It was a result of the front end throttle taking up more space. Also. the left front running board needs to be lowered and the headlight gets raised a little. I figure you already know about the feedwater heater and the air pumps. The box on the right side is for ATC on the Shennandoah, and not all Y6's had one. Check photos. BTW: in the late steam era, some Y6's got the sheathed smoke box (as on most Y6b's).
Jim Nichols
    On Saturday, April 16, 2022, 06:50:20 AM CDT, NW Modeling List <nw-modeling-list at nwhs.org> wrote:  
 
 Now you've done it, Phil!I have been buying up Y6b's with plans to either cut down the boiler, and/or create a 3D model/print of whatever I need to change it over.Can anyone point out differences, besides the feedwater heater and air pumps, and the shorter smokebox ?Which locos had forward leaning stacks - all Y6 variants, or just the "b"It seems like a pretty do-able conversion?I've overlaid a Y6b blueprint over an Y6a imageWhat glaring items am I overlooking?
Definitely in over his head,Mike Rector



On Fri, Apr 15, 2022 at 6:37 PM NW Modeling List via NW-Modeling-List <nw-modeling-list at nwhs.org> wrote:

I wish the companies that produce HO-scale Y6b models would consider
offering the Y6a, since there would be a lot of parts/drive mechanism that
could be common to both. 
While the Y6b was the zenith of steam, a Y6a still exists (2156). Seems like
little effort would be expended to offer a model of an existing engine, much
as was done for 611 and 1218. 
Phil Miller

-----Original Message-----
From: NW-Modeling-List <nw-modeling-list-bounces at nwhs.org> On Behalf Of NW
Modeling List
Sent: Friday, April 15, 2022 10:33 AM
To: nw-modeling-list at nwhs.org
Subject: Re: N&W caboose project Spring Mills Depot status

Anybody got any guesses why no model manufacturer hasn't offered a
reasonably accurate, plastic, steam-era N&W caboose in the past 50 years?

Seems like they would only sell about a 1000 of them in the first year.

I can't even remember how many SMD cabs I reserved. But it was/is a lot.

John Garner, Newport VA
________________________________________
NW-Modeling-List at nwhs.org
To change your subscription go to
http://list.nwhs.org/mailman/options/nw-modeling-list
Browse the NW-Modeling-List archives at
http://list.nwhs.org/pipermail/nw-modeling-list/

________________________________________
NW-Modeling-List at nwhs.org
To change your subscription go to
http://list.nwhs.org/mailman/options/nw-modeling-list
Browse the NW-Modeling-List archives at
http://list.nwhs.org/pipermail/nw-modeling-list/

________________________________________
NW-Modeling-List at nwhs.org
To change your subscription go to
http://list.nwhs.org/mailman/options/nw-modeling-list
Browse the NW-Modeling-List archives at
http://list.nwhs.org/pipermail/nw-modeling-list/
  
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://pairlist6.pair.net/pipermail/nw-modeling-list/attachments/20220416/5fa27e3d/attachment-0001.htm>
-------------- next part --------------
A non-text attachment was scrubbed...
Name: image.png
Type: image/png
Size: 744635 bytes
Desc: not available
URL: <https://pairlist6.pair.net/pipermail/nw-modeling-list/attachments/20220416/5fa27e3d/attachment-0001.png>